Superglue on C64 Case

Hewitson · 21 February 2008, 10:16

While supergluing the "commodore 64 personal computer" badge down on my c64 I accidentally got a bit of superglue on the case. The superglue recommends using Acetone to remove it, but im worried this will discolour the plastic.

Any suggestions?

Thanks

Magno Boots · 21 February 2008, 21:41

I wouldn't risk using acetone on your c64 case as I think you are more likely to melt the plastic rather than remove the glue.

It may also leave a shiney surface on your case when you wipe the solvent off.

I've used carb cleaners containing acetone previously and they sure can make a mess of motorcycle paint / plastics.

Pick as much off with a lolly stick then leave it alone!

adolescent · 22 February 2008, 01:45

Try vinegar.

Edit: Maybe another path...

From the Krazy Glue FAQ:

Instant Krazy Glue® can be removed with acetone. However, acetone is a pretty powerful solvent and can damage some types of plastic. A safer solvent is nitromethane that can usually be found at specialty hobby stores. Look for products called "de-bonders" containing the nitromethane component. Always be sure to test whatever solvent you choose on an inconspicuous area first to check for compatibility issues.

21 February 2008, 10:16	#1
Hewitson Registered User Join Date: Feb 2007 Location: Melbourne, Australia Age: 30 Posts: 1,389	Superglue on C64 Case While supergluing the "commodore 64 personal computer" badge down on my c64 I accidentally got a bit of superglue on the case. The superglue recommends using Acetone to remove it, but im worried this will discolour the plastic. Any suggestions? Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
C64/3D vs C64/3D vs Picasso IV (or both)	alewis	support.Hardware	19	30 November 2006 11:36
What is this metal A500+ case?	Smiley	support.Hardware	3	04 July 2005 03:02
Case Of The Cautious Condor	Kid^C	support.WinUAE	1	08 January 2004 17:52
Wanted! CD32 Case and A1200 Case!	ElectroBlaster	MarketPlace	0	08 December 2002 18:28

21 February 2008, 21:41	#2
Magno Boots Zone Friend Join Date: Feb 2006 Location: Hertfordshire Posts: 680	I wouldn't risk using acetone on your c64 case as I think you are more likely to melt the plastic rather than remove the glue. It may also leave a shiney surface on your case when you wipe the solvent off. I've used carb cleaners containing acetone previously and they sure can make a mess of motorcycle paint / plastics. Pick as much off with a lolly stick then leave it alone!

22 February 2008, 01:45	#3
adolescent Powered by Motorola Join Date: Feb 2002 Location: Redondo Beach, CA Posts: 1,056	Try vinegar. Edit: Maybe another path... From the Krazy Glue FAQ: Instant Krazy Glue® can be removed with acetone. However, acetone is a pretty powerful solvent and can damage some types of plastic. A safer solvent is nitromethane that can usually be found at specialty hobby stores. Look for products called "de-bonders" containing the nitromethane component. Always be sure to test whatever solvent you choose on an inconspicuous area first to check for compatibility issues.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)