Display Woes

[BinoX]

This may be a n00b question, and I have done a search but can't find anything...

I got an A3000 today (hooray!)

But the display seems to start too far down the screen (thus losing the bottom bit of the display)

On a 15 inch screen, in workbench, the menu is about 1inch away from the top of the screen. Is there anything I can do to fix that?

In case it's important I'm using it on a monitor using the Amber chip to do the scan doubling... (I don't have any way of connecting it to another screen at the moment, all my A520s are missing)

[spiff]

Might sound a bit stupid, but you did poke around with the monitor knobs first right?

[BinoX]

Yeah, I managed to move it up a little bit, but not far enough... There's still a bit at the bottom of the screen that just is too far down to be seen (Not quite as much as before though)

Maybe it's the fact I'm using a TFT? (Sorry, meant to point that out before and forgot)


Edit: I'd like to add that it's not an unusable amount, just enough to bug me....

[Zetr0]

@Binox,

if you just boot to the menu screen or insert disk or game, do you still have this issue?

if not then i would say you need to change your overscan prefs in workbench...

but knowing you my friend, you have prolly already tried this...

[BinoX]

It's the same in everything...

It probably just is the monitor (which is a shame 'cause it's a nice size to sit on the A3000 case) I'll see if I can get something with twiddly knobs at work tomorrow, they're always good for stuff like that.. lol