Micronik and G-Rex 1200

[gbraad]

Hello,

does anyone have a picture of the power connector for the Micronik tower? It is probably just connecting 5v and 12v. Just to be sure... since the picture in the manual: http://grex.amigaworld.de/download.php?id=36 is not quite clear.

thanks,


Gerard

[Zetr0]

@gbraad

Hello there,

hmmm i can see you confusion, now the G-Rex has two options for input of power

1. ATX (20pin)
2. AT (12pin) *only 10 in use on the GREX

the original Micronick tower does NOT use any of thes factors for power infact it uses its own... (damn pain really)

but there are a couple of things you can do so here we go;

one is that you can throw out the old PSU and lump in a nice new juicey ATX PSU and re-build an on/off button a smidge

OR

you can convert the existing micronk plug for use with the 12pin (P8/P9) connector.

okay so as its getting late (about 4am here ) i will post the micronik info I will post the P8 / P9 pinout too... i think if i have it already uploaded lol

micronic power input


the orginal micronik document
http://www.guildserver.co.uk/project...serialNumber=1

Power Supply to Motherboard AT P8-P9

1 Orange Power Good
2 Red +5V DC
3 Yellow +12V DC
4 Blue -12V DC
5 Black Ground
6 Black Ground
7 Black Ground
8 Black Ground
9 White -5V DC
10 Red +5V DC
11 Red +5V DC
12 Red +5V DC

[gbraad]

Zetr0 thanks...

I also like the Similar threads function below ... since it showed this link
http://eab.abime.net/showthread.php?t=17655

I had seen the page keropi mentions, although I was not sure it would work.

[keropi]

what do you need gbraad ? a pic of the g-rex1200 power connector???

[gbraad]

Originally Posted by keropi

a pic of the g-rex1200 power connector???

Thanks for the offer, but already done now... ...

[keropi]

cool
enjoy the best a1200 busboard!!!