Bug??: Sound Left/Right flipped for A1200 and setting is not saveable

[rsn8887]

Hi, I think I found a miniscule bug in WinUAE 1.3.2:

In A500 Config, the speaker left/right setting is fine (tested with SWIV).
But in A1200 Config, the speaker left/right seems to be reversed (tested with poing on workbench for example).

E.g. I have to enable "swap left/right for Paula only" ONLY when using a standard A1200 config to get the right result.

Regarding the same topic, the "swap left/right" setting on the sound panel does not get saved into my config. It resets back to normal every time I load a config. Dunno if this is a feature or a bug though...

[Toni Wilen]

Originally Posted by rsn8887

tested with poing on workbench for example

Use something that directly accesses audio hardware. Programs that use audio.device can get any channel (if they don't specifically ask for correct channel)

[Toni Wilen]

Originally Posted by rsn8887

Regarding the same topic, the "swap left/right" setting on the sound panel does not get saved into my config. It resets back to normal every time I load a config. Dunno if this is a feature or a bug though...

Hmm.. Stereo swap setting was never saved to config (or loaded from it..)

Looks like I forgot to implement it, will be fixed in next release

[rsn8887]

Cool, thanks!

I will re-check the audio with something that does not use audio.device. I bet it will be fine, but haven't checked again yet. Somehow poing made sense to me though when I first checked. This is since the ball-hitting-block sound used to be on the right speaker on my miggy... but in UAE it came out of the left speaker.