CF<>IDE not recognised by HDtoolbox

Smiley · 24 May 2006, 17:17

Hi I have an A1200T with a apollo 040.

I am using a buffered IDE splitter and ideix 97.

I have a ide to cf card adapter which I got of Ebay. Whenever I connect it to either IDE cable it doesnt show up in HDtoolbox. My HD (ide cable 1) shows up and even my cdrom (ide cable 2) shows up.

Are there any other things I can try?

(Im using a 32mb cf card for the time being)

rare_j · 25 May 2006, 00:54

I never got a CF on IDE to work with idefix. It would crash as soon as it was run. Sounds like your CF isn't connected properly. Check the hdd and the CF are jumpered up properly as master and slave. It doesn't matter at all which is master and which is slave. The CF IDE adapter I got off ebay didn't register properly as a master because the jumper pins on the board were skewed and weren't being closed by the jumper properly which caused some confusion so check that.
Try the CF as a master on cable 1 without idefix.

Jope · 26 May 2006, 06:27

This is most likely a problem with the CF card itself.. The adapters are all identical (there's only one way to wire a CF <-> IDE adapter), so it's up to the card to play nice on the IDE bus.

If you can borrow some other cards, try different brands.

24 May 2006, 17:17	#1
Smiley Amiga-less! Join Date: Feb 2005 Location: UK Posts: 1,346	CF<>IDE not recognised by HDtoolbox Hi I have an A1200T with a apollo 040. I am using a buffered IDE splitter and ideix 97. I have a ide to cf card adapter which I got of Ebay. Whenever I connect it to either IDE cable it doesnt show up in HDtoolbox. My HD (ide cable 1) shows up and even my cdrom (ide cable 2) shows up. Are there any other things I can try? (Im using a 32mb cf card for the time being)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Plextor 16-10-40 CDR not recognised through IDEFix97	manicx	support.Hardware	0	03 February 2005 09:26
King's Quest 6 - Disks not recognised	Tim Janssen	support.Games	2	17 May 2004 16:48
HDtoolbox	leongt	request.Apps	3	14 May 2003 10:17
HDToolBox	Mick_AKA	request.Apps	3	15 July 2002 00:49

25 May 2006, 00:54	#2
rare_j Zone Friend Join Date: Apr 2005 Location: London Posts: 507	I never got a CF on IDE to work with idefix. It would crash as soon as it was run. Sounds like your CF isn't connected properly. Check the hdd and the CF are jumpered up properly as master and slave. It doesn't matter at all which is master and which is slave. The CF IDE adapter I got off ebay didn't register properly as a master because the jumper pins on the board were skewed and weren't being closed by the jumper properly which caused some confusion so check that. Try the CF as a master on cable 1 without idefix.

26 May 2006, 06:27	#3
Jope - Join Date: Jul 2003 Location: Helsinki / Finland Age: 32 Posts: 4,061	This is most likely a problem with the CF card itself.. The adapters are all identical (there's only one way to wire a CF <-> IDE adapter), so it's up to the card to play nice on the IDE bus. If you can borrow some other cards, try different brands.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)