Battery of the expansion memory set of the A500

16 November 2001, 22:18

Hello guys.

Im trying to put my old AMIGA 500
working again.

I have a question.

I was almost sure that it had 1mb of ram.
But when I turned it on and loaded workbench
it showed just 380kb of free ram. I think
it can be some expansion memory card
problem.

So... I opened the computer and found the
expansion set, there was a key to switch
it on apparently, I turned it on, but then
noticed that there is a BATTERY missing
in the expansion set.

Can anyone tell me what kind of battery it is?
and what is its VOLTAGE??

should the expansion memory set work without the battery??

TikTok · 17 November 2001, 01:33

The battery will be for the inbuilt clock, and so shouldn't affect the RAM. Have you tried removing the card and running Workbench again to see how much RAM is free

Maybe the problem could be as simple as a bad connection for the expansion card, esp if it has been say gathering dust for years?

17 November 2001, 17:43

I will try that.

17 November 2001, 23:14

I tried removing the memory expansion, and it
stayed with the same 380kb on workbench.

problably the expansion cartridge is not working right.

Overdoc · 18 November 2001, 02:04

Well, I have a battery of an A-500 ramexpansion here, but it's not a 512kB expansion but a bigger, 4.5MB expansion. So I don't know if batteries are the same, but it is one of these blue, zylinder like batteries that are soldered into the board. ( I have also seen expansions with flat, round, non-rechargable batteries )
It has 3.6V and 60mAH.

Maybe the switch doesn't work correctly on your expansion ?
Also carefully inspect the area around there where the battery should be: A leaking battery can kill some traces of the board !
That's why I desoldered the battery of my expansionboard.
Also some expanionboard have some jumper which switches them on & off.

18 November 2001, 22:34

The expansion card seems to be in good shape.

the socket of battery is for a coin like battery.

it is written rayovac 2325 near the socket.

I tried to plug in and out the board many times,
but got no results.

there is also a on/off key on the board.

Overdoc · 19 November 2001, 01:59

Ok, I suppose you tried to switch the on/off key in both positions ( only when the Amiga is turned off ! ) and both times you only got 512KB internal memory, right ? ( that would have been too easy

)
Rayovac 2325 doesn't tell me anything, but I found out it's a 3V battery and should only cost about a dollar or two. ( just serach for Rayovac in google or something ) Ask a nearby electronics dealer and he should have it.
If you cannot find exactly this battery then you could also try a CR 2032, CR 2025 or CR 2016. These are also coin like and also have 3V and differ in height, but one of them may fit in your expansion, too.

Nevertheless I suppose the battery is only for the real time watch and the memory should work without it ( like mentioned already ), but who knows....

19 November 2001, 17:28

Ok im gonna buy one of that.

I hope it works.

I want to transfer files from PC to AMIGA
and I suppose it should become very
hard with just 512kb ram

Akira · 21 November 2001, 17:01

Yeah, but it's as hard with 1 meg. If you have no HD, you would be cool if you had 2MB of RAM.

16 November 2001, 22:18	#1
Unregistered Posts: n/a	Battery of the expansion memory set of the A500 Hello guys. Im trying to put my old AMIGA 500 working again. I have a question. I was almost sure that it had 1mb of ram. But when I turned it on and loaded workbench it showed just 380kb of free ram. I think it can be some expansion memory card problem. So... I opened the computer and found the expansion set, there was a key to switch it on apparently, I turned it on, but then noticed that there is a BATTERY missing in the expansion set. Can anyone tell me what kind of battery it is? and what is its VOLTAGE?? should the expansion memory set work without the battery??

18 November 2001, 02:04	#5
Overdoc Commodore Collector Join Date: Aug 2001 Location: Austria Age: 42 Posts: 766	Well, I have a battery of an A-500 ramexpansion here, but it's not a 512kB expansion but a bigger, 4.5MB expansion. So I don't know if batteries are the same, but it is one of these blue, zylinder like batteries that are soldered into the board. ( I have also seen expansions with flat, round, non-rechargable batteries ) It has 3.6V and 60mAH. Maybe the switch doesn't work correctly on your expansion ? Also carefully inspect the area around there where the battery should be: A leaking battery can kill some traces of the board ! That's why I desoldered the battery of my expansionboard. Also some expanionboard have some jumper which switches them on & off. __________________ Overdoc

19 November 2001, 01:59	#7
Overdoc Commodore Collector Join Date: Aug 2001 Location: Austria Age: 42 Posts: 766	Ok, I suppose you tried to switch the on/off key in both positions ( only when the Amiga is turned off ! ) and both times you only got 512KB internal memory, right ? ( that would have been too easy ) Rayovac 2325 doesn't tell me anything, but I found out it's a 3V battery and should only cost about a dollar or two. ( just serach for Rayovac in google or something ) Ask a nearby electronics dealer and he should have it. If you cannot find exactly this battery then you could also try a CR 2032, CR 2025 or CR 2016. These are also coin like and also have 3V and differ in height, but one of them may fit in your expansion, too. Nevertheless I suppose the battery is only for the real time watch and the memory should work without it ( like mentioned already ), but who knows.... __________________ Overdoc

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
512kb a500 expansion cards	icewizard2k5	MarketPlace	8	28 February 2005 13:12
[b]A500 MEMORY EXPANSION ON A1200??[/b]	Mojo	support.Hardware	4	04 October 2003 23:46
Problem with sound in OS 3.9!	Tbird	support.WinUAE	30	20 February 2003 19:09
Cant memory expand my OS2 A500	Antiriad	support.Hardware	15	28 December 2002 09:29
Should I remove the Expansion Battery?	Bloodwych	support.Hardware	16	23 July 2002 17:47

17 November 2001, 01:33	#2
TikTok Registered User Join Date: Jul 2001 Location: San Salvador, El Salvador Age: 32 Posts: 642	The battery will be for the inbuilt clock, and so shouldn't affect the RAM. Have you tried removing the card and running Workbench again to see how much RAM is free Maybe the problem could be as simple as a bad connection for the expansion card, esp if it has been say gathering dust for years?

17 November 2001, 17:43	#3
Unregistered Posts: n/a	I will try that.

17 November 2001, 23:14	#4
Unregistered Posts: n/a	I tried removing the memory expansion, and it stayed with the same 380kb on workbench. problably the expansion cartridge is not working right.

18 November 2001, 22:34	#6
Unregistered Posts: n/a	The expansion card seems to be in good shape. the socket of battery is for a coin like battery. it is written rayovac 2325 near the socket. I tried to plug in and out the board many times, but got no results. there is also a on/off key on the board.

19 November 2001, 17:28	#8
Unregistered Posts: n/a	Ok im gonna buy one of that. I hope it works. I want to transfer files from PC to AMIGA and I suppose it should become very hard with just 512kb ram

21 November 2001, 17:01	#9
Akira Registered User Join Date: May 2001 Location: # Posts: 12,584	Yeah, but it's as hard with 1 meg. If you have no HD, you would be cool if you had 2MB of RAM.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)