WHDload under OS3.5 not working?!?!

Chain · 10 September 2005, 20:49

I have problem with whdload games.

today i was installed os 3.5

and now i cant run almost all games.
it runs but i have black screen after preloading slave.

teh same harddrive

, same A1200

hooked on 1084 monitor

is there any special version of whdload for 3.5? or i need to configure something?

any

welcome!!!

Galahad/FLT · 10 September 2005, 21:20

Try booting with no startup-sequence, if that works, then there is something loaded within the startup sequence that is affecting WHDLoad.

Chain · 10 September 2005, 22:10

Quote:

Originally Posted by Galahad/FLT

Try booting with no startup-sequence, if that works, then there is something loaded within the startup sequence that is affecting WHDLoad.

something=setpatch

but without setpatch i cant use my large drive so 3.5 is useless for me too

its a standard startup-seq, it was new drive > 3.1 inst (and some games of course) > 3.5 inst.
no modyfing startup

Chain · 11 September 2005, 11:48

bump!

machines:
a1200 commodore, a1200 amiga escom/at (both 3.1 roms)
Blizzard 1230MK-IV(16meg), Blizzard1230 MK-II(32meg), Apollo 1230LC(8meg)
OS 3.5 installed from scratch, 6G and 10G drives
no pcmcia-eth inserted
display devices: TV, 1084 monitor

Galahad/FLT · 11 September 2005, 23:03

What is the full description in the startup sequence reference 'Setpatch'.

Also, when you disabled the startup-sequence, did WHDLoad work?

If not, disable startup-sequence again, and then when the CLI opens up, type in what it says in the startup-sequence reference 'Setpatch'.

Not aware that Setpatch would affect your Amiga's ability to see the hard drive as it would have to load Setpatch from the drive in the first place.

Chain · 12 September 2005, 18:40

C: Setpatch QUIET

as installed

if i run setpatch by hand it says:

installing romupdate
installing filesystem
installing scsi.device

reboot after 3.2.1...

(i think its STANDARD! coz it was installed from scratch)

Chain · 12 September 2005, 18:44

disable startup sequence > games still not workin

BUMP!

Chain · 13 September 2005, 20:21

is there any problem wit new workbench libraries etc?
im trying to run it without startup-sequence, just typah "loadwb", "endcli"

Chain · 14 September 2005, 10:02

nobody knows?
i really need some help please

bippym · 14 September 2005, 10:15

okay edit your startup-sequence and edit out the setpatch command

Code:

;setpatch quiet

then let it boot.. if it gets to WB then try running a game..

I suspect there are some software complications somewhere

Chain · 14 September 2005, 10:50

Quote:

Originally Posted by bippym

okay edit your startup-sequence and edit out the setpatch command

Code:

;setpatch quiet

then let it boot.. if it gets to WB then try running a game..

I suspect there are some software complications somewhere

i already tried that, its still the same, with or without setpatch, with or without startup-sequence

Galahad/FLT · 14 September 2005, 15:12

Boot with no startup-sequence. Select a game you want to play by copying it all into RAM: and CD to RAM: and try running WHDLoad from there.

Chain · 14 September 2005, 16:06

hooooo, it works from ram: !

sooo where is teh problem? something with scsi device/setpatch?

Chain · 14 September 2005, 16:12

damn, it works from CF card too! but not from harddrive

(((
btw at least i can register it when it works

Galahad/FLT · 14 September 2005, 16:17

It could be the Max Transfer rate has been altered by the installation of 3.5. I think you need to use HDToolBox to alter how much data the system is allowed to read at anyone time.

When you use WHDLoad, I think it will blind load the whole file, whereas AmigaDOS copy command/DOPUS/Filemaster or whatever you are using copies files in chunks, therefore the Max Transfer rate doesn't affect the system.

I had this problem with Devpac if I assembled a file that would have a large output. I had to assemble to RAM: first, then copy the file from RAM: so that there would be no problems.

Chain · 14 September 2005, 16:31

maxtransfer is 0x0000FFFF, and mask 0x7FFFFFFF

edit: filesystem blocksize 512

Chain · 14 September 2005, 16:42

hooray, now im waiting for my key

Galahad/FLT · 14 September 2005, 16:43

So does WHDLoad now operate correctly from Hard drive?

adgloride · 14 September 2005, 19:02

I've used whdload b4 on 3.5 b4 I upgraded to 3.9 and never had any problems.

Chain · 14 September 2005, 19:08

nope, seems that maxtransfer value is incorrect as you said Galahad

it must be 0x00FFFFFF!

Plase kill me soon

Galahad/FLT · 15 September 2005, 03:58

No problemo, another ghost laid to rest.

Chain · 15 September 2005, 06:21

...and i got my key after 3 hours

Excellent

10 September 2005, 20:49	#1
Chain A-Collector, repairments Join Date: Jul 2001 Location: Czech Rep. Age: 39 Posts: 1,490	WHDload under OS3.5 not working?!?! I have problem with whdload games. today i was installed os 3.5 and now i cant run almost all games. it runs but i have black screen after preloading slave. teh same harddrive , same A1200 hooked on 1084 monitor is there any special version of whdload for 3.5? or i need to configure something? any welcome!!!

10 September 2005, 21:20	#2
Galahad/FLT Going nowhere Join Date: Oct 2001 Location: United Kingdom Age: 39 Posts: 5,029	Try booting with no startup-sequence, if that works, then there is something loaded within the startup sequence that is affecting WHDLoad. __________________ Former member of: LSD, Scoopex, Razor 1911, Dual Crew Shining, Rednex, Fairlight. www.southwestscrap.co.uk

11 September 2005, 23:03	#5
Galahad/FLT Going nowhere Join Date: Oct 2001 Location: United Kingdom Age: 39 Posts: 5,029	What is the full description in the startup sequence reference 'Setpatch'. Also, when you disabled the startup-sequence, did WHDLoad work? If not, disable startup-sequence again, and then when the CLI opens up, type in what it says in the startup-sequence reference 'Setpatch'. Not aware that Setpatch would affect your Amiga's ability to see the hard drive as it would have to load Setpatch from the drive in the first place. __________________ Former member of: LSD, Scoopex, Razor 1911, Dual Crew Shining, Rednex, Fairlight. www.southwestscrap.co.uk

12 September 2005, 18:44	#7
Chain A-Collector, repairments Join Date: Jul 2001 Location: Czech Rep. Age: 39 Posts: 1,490	disable startup sequence > games still not workin BUMP! Last edited by Chain; 13 September 2005 at 20:19.

13 September 2005, 20:21	#8
Chain A-Collector, repairments Join Date: Jul 2001 Location: Czech Rep. Age: 39 Posts: 1,490	is there any problem wit new workbench libraries etc? im trying to run it without startup-sequence, just typah "loadwb", "endcli" Last edited by Chain; 14 September 2005 at 10:00.

11 September 2005, 11:48	#4
Chain A-Collector, repairments Join Date: Jul 2001 Location: Czech Rep. Age: 39 Posts: 1,490	bump! machines: a1200 commodore, a1200 amiga escom/at (both 3.1 roms) Blizzard 1230MK-IV(16meg), Blizzard1230 MK-II(32meg), Apollo 1230LC(8meg) OS 3.5 installed from scratch, 6G and 10G drives no pcmcia-eth inserted display devices: TV, 1084 monitor

12 September 2005, 18:40	#6
Chain A-Collector, repairments Join Date: Jul 2001 Location: Czech Rep. Age: 39 Posts: 1,490	C: Setpatch QUIET as installed if i run setpatch by hand it says: installing romupdate installing filesystem installing scsi.device reboot after 3.2.1... (i think its STANDARD! coz it was installed from scratch)

14 September 2005, 10:02	#9
Chain A-Collector, repairments Join Date: Jul 2001 Location: Czech Rep. Age: 39 Posts: 1,490	nobody knows? i really need some help please

14 September 2005, 10:15	#10
bippym Global Moderator Join Date: Nov 2001 Location: Derby, UK Age: 37 Posts: 8,141	okay edit your startup-sequence and edit out the setpatch command Code: ;setpatch quiet then let it boot.. if it gets to WB then try running a game.. I suspect there are some software complications somewhere

14 September 2005, 15:12	#12
Galahad/FLT Going nowhere Join Date: Oct 2001 Location: United Kingdom Age: 39 Posts: 5,029	Boot with no startup-sequence. Select a game you want to play by copying it all into RAM: and CD to RAM: and try running WHDLoad from there. __________________ Former member of: LSD, Scoopex, Razor 1911, Dual Crew Shining, Rednex, Fairlight. www.southwestscrap.co.uk

14 September 2005, 16:06	#13
Chain A-Collector, repairments Join Date: Jul 2001 Location: Czech Rep. Age: 39 Posts: 1,490	hooooo, it works from ram: ! sooo where is teh problem? something with scsi device/setpatch?

14 September 2005, 16:12	#14
Chain A-Collector, repairments Join Date: Jul 2001 Location: Czech Rep. Age: 39 Posts: 1,490	damn, it works from CF card too! but not from harddrive ((( btw at least i can register it when it works

14 September 2005, 16:17	#15
Galahad/FLT Going nowhere Join Date: Oct 2001 Location: United Kingdom Age: 39 Posts: 5,029	It could be the Max Transfer rate has been altered by the installation of 3.5. I think you need to use HDToolBox to alter how much data the system is allowed to read at anyone time. When you use WHDLoad, I think it will blind load the whole file, whereas AmigaDOS copy command/DOPUS/Filemaster or whatever you are using copies files in chunks, therefore the Max Transfer rate doesn't affect the system. I had this problem with Devpac if I assembled a file that would have a large output. I had to assemble to RAM: first, then copy the file from RAM: so that there would be no problems. __________________ Former member of: LSD, Scoopex, Razor 1911, Dual Crew Shining, Rednex, Fairlight. www.southwestscrap.co.uk

14 September 2005, 16:31	#16
Chain A-Collector, repairments Join Date: Jul 2001 Location: Czech Rep. Age: 39 Posts: 1,490	maxtransfer is 0x0000FFFF, and mask 0x7FFFFFFF edit: filesystem blocksize 512

14 September 2005, 16:42	#17
Chain A-Collector, repairments Join Date: Jul 2001 Location: Czech Rep. Age: 39 Posts: 1,490	hooray, now im waiting for my key

14 September 2005, 16:43	#18
Galahad/FLT Going nowhere Join Date: Oct 2001 Location: United Kingdom Age: 39 Posts: 5,029	So does WHDLoad now operate correctly from Hard drive? __________________ Former member of: LSD, Scoopex, Razor 1911, Dual Crew Shining, Rednex, Fairlight. www.southwestscrap.co.uk

14 September 2005, 19:02	#19
adgloride Amiga Mod Chipper Join Date: Jun 2004 Location: UK Age: 40 Posts: 229	I've used whdload b4 on 3.5 b4 I upgraded to 3.9 and never had any problems.

14 September 2005, 19:08	#20
Chain A-Collector, repairments Join Date: Jul 2001 Location: Czech Rep. Age: 39 Posts: 1,490	nope, seems that maxtransfer value is incorrect as you said Galahad it must be 0x00FFFFFF! Plase kill me soon Last edited by Chain; 14 September 2005 at 20:24.

15 September 2005, 03:58	#21
Galahad/FLT Going nowhere Join Date: Oct 2001 Location: United Kingdom Age: 39 Posts: 5,029	No problemo, another ghost laid to rest. __________________ Former member of: LSD, Scoopex, Razor 1911, Dual Crew Shining, Rednex, Fairlight. www.southwestscrap.co.uk

15 September 2005, 06:21	#22
Chain A-Collector, repairments Join Date: Jul 2001 Location: Czech Rep. Age: 39 Posts: 1,490	...and i got my key after 3 hours Excellent Last edited by Chain; 15 September 2005 at 06:33.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AudioCDs Under OS3.9	mleft	support.WinUAE	5	18 September 2003 07:33
WBStartup in OS3.9...	th4t1guy	support.Apps	6	26 August 2003 23:40
CD player in OS3.9	stainy	support.WinUAE	7	21 July 2003 17:56
Simulcra WHDLoad - not working	haynor	support.Games	0	14 July 2003 20:51
Final Fight WHDLoad - not working on emu	haynor	support.Games	3	05 May 2003 16:54