A1200 Onboard

alewis · 12 January 2005, 00:19

Anyone got any experience with the A1200 Onboard busboard expansion?

After 5 years of having an 1200 tower, Blizzard 060, and one of these busboards, I thought I'd get it working all together. The 1200/060 works (well, it did when I got it, and it did when I powered it up for the 2nd time, 3+ years ago...)

Just looking for tips in advance whilst I put this heath robinson contraption together... and before any ex-REME types start, yes, I did "get a bigger hammer"

keropi · 12 January 2005, 08:03

u mean the RBM zorroII busboard?

Shoonay · 12 January 2005, 08:06

Quote:

Originally Posted by alewis

and before any ex-REME types start, yes, I did "get a bigger hammer"

But did you use the pneumatic one?

alewis · 12 January 2005, 13:16

lol. (ex)-REME then? Or other unit?

alewis · 12 January 2005, 13:17

Quote:

Originally Posted by keropi

u mean the RBM zorroII busboard?

Yes, thats it.

keropi · 12 January 2005, 13:22

ah.... do u have any kind of manual for it? I also have this busboard, but in my case it behaves a little strange I think.... perhaps the damn amigatech 1200 m/b is to blame....

alewis · 13 January 2005, 00:10

I have a poor photocopy of an installation guide, and thats it; it makes reference to a "manual", although it is hard to see what else there is a manual could cover! Other than better (ie clearer) pictures of the boards.

I'm wondering if it does work, seeing as the previous owner physically fitted it, but never hooked it up to the A1200...

Will get round to firing it up tomorrow, I hope

What cards are you running in it? As much as I would have liked the Picasso II in there, the A2000 is going to have to go, so it can stay in there. So the C64/3D will have to be fitted, together with the SD/FF, and the PIV will go into to the A4K. Typically, the OnBoard doesnt do DMA. Great, as the SCSI card I was going to add uses DMA; the Blizzard's SCSI runs to an external 25pin conector, which means running an external cable back into the Amiga (it has a DB50 connector at the top just for this!) in order to use a SCSI card internally mounted with internal SCSI devices. Lol, "only the Amiga" ;-)

12 January 2005, 00:19	#1
alewis Registered User Join Date: Nov 2004 Location: Venice, FL Age: 46 Posts: 520	A1200 Onboard Anyone got any experience with the A1200 Onboard busboard expansion? After 5 years of having an 1200 tower, Blizzard 060, and one of these busboards, I thought I'd get it working all together. The 1200/060 works (well, it did when I got it, and it did when I powered it up for the 2nd time, 3+ years ago...) Just looking for tips in advance whilst I put this heath robinson contraption together... and before any ex-REME types start, yes, I did "get a bigger hammer"

12 January 2005, 08:03	#2
keropi . Join Date: Oct 2004 Location: Ioannina/Greece Posts: 5,041	u mean the RBM zorroII busboard? __________________ *A1200D mfilos ed.* : ACA 1231/42 , Indivision MK2 , IDEfix Express , Subway , PicoPSU 120w custom 3.9 ROM/OS**

12 January 2005, 13:22	#6
keropi . Join Date: Oct 2004 Location: Ioannina/Greece Posts: 5,041	ah.... do u have any kind of manual for it? I also have this busboard, but in my case it behaves a little strange I think.... perhaps the damn amigatech 1200 m/b is to blame.... __________________ *A1200D mfilos ed.* : ACA 1231/42 , Indivision MK2 , IDEfix Express , Subway , PicoPSU 120w custom 3.9 ROM/OS**

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Strange A1200 behaviour	manicx	support.Hardware	39	09 November 2005 08:32
OnBoard 1200 Ex V2.0 busboard for A1200 in RBM tower !!	Effy	MarketPlace	4	13 June 2005 23:16
A1200 , and a1200 hardware	keropi	MarketPlace	23	22 February 2005 00:17
WHDLoad & Mediator PCI A1200	girv	support.Games	3	20 December 2004 18:08
Expanded CD32 vs A1200	NytroX86	Retrogaming General Discussion	13	14 November 2002 21:55

12 January 2005, 13:16	#4
alewis Registered User Join Date: Nov 2004 Location: Venice, FL Age: 46 Posts: 520	lol. (ex)-REME then? Or other unit?

13 January 2005, 00:10	#7
alewis Registered User Join Date: Nov 2004 Location: Venice, FL Age: 46 Posts: 520	I have a poor photocopy of an installation guide, and thats it; it makes reference to a "manual", although it is hard to see what else there is a manual could cover! Other than better (ie clearer) pictures of the boards. I'm wondering if it does work, seeing as the previous owner physically fitted it, but never hooked it up to the A1200... Will get round to firing it up tomorrow, I hope What cards are you running in it? As much as I would have liked the Picasso II in there, the A2000 is going to have to go, so it can stay in there. So the C64/3D will have to be fitted, together with the SD/FF, and the PIV will go into to the A4K. Typically, the OnBoard doesnt do DMA. Great, as the SCSI card I was going to add uses DMA; the Blizzard's SCSI runs to an external 25pin conector, which means running an external cable back into the Amiga (it has a DB50 connector at the top just for this!) in order to use a SCSI card internally mounted with internal SCSI devices. Lol, "only the Amiga" ;-)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)