Micronik Infinitiv Tower problem...

07 October 2001, 00:51

I have 2 problems:

1. Plug the hdd/power led cable to the mainboard, but only the power led lighting...

2. Where is the reset pins??? Reset button is present...

A1200 Mainboard: rev1D

thx!

Akira · 07 October 2001, 21:51

Dunno why it has a reset button, since the Amigas are resetted with a key combination (!?!)

Sorry I cannot be of help, this just sounds strange

08 October 2001, 14:30

it is indeed possible to reset the tower amiga through the switch. all the info that you need to do this is found in this archive on aminet:

http://ftp.plig.org/pub/aminet/hard/hack/A1k2TReset.lha

i suggest reading that it should sort your reset problem out.

<akira>
Not being registered doesn't mean you can be 'cool' and use a signature :P
</akira>

Smiley · 11 February 2007, 18:29

Thought I would reply to a nice obsolete thread.

The reset pins are located on the micronik busboards. You cannot use the reset lead without the appropriate busboard. Unless you want to go soldering your A1200 mobo.

Sorry for the 6 year wait T0Mi

Chain · 12 February 2007, 07:06

if you dont want to solder on board directly, i can recommend one fo those "pcmcia reset fix" sockets from amigakit

07 October 2001, 00:51	#1
T0Mi Posts: n/a	Micronik Infinitiv Tower problem... I have 2 problems: 1. Plug the hdd/power led cable to the mainboard, but only the power led lighting... 2. Where is the reset pins??? Reset button is present... A1200 Mainboard: rev1D thx!

08 October 2001, 14:30	#3
CHiEF Posts: n/a	big bad dom it is indeed possible to reset the tower amiga through the switch. all the info that you need to do this is found in this archive on aminet: http://ftp.plig.org/pub/aminet/hard/hack/A1k2TReset.lha i suggest reading that it should sort your reset problem out. <akira> Not being registered doesn't mean you can be 'cool' and use a signature :P </akira> Last edited by Akira; 08 October 2001 at 19:37.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Micronik Infinitiv II	martin-flash	MarketPlace	7	30 May 2005 13:47
Amiga 1200 Black Screen Problem	mindjoker	support.Hardware	0	29 December 2004 22:12
EZ Tower conversion problem	drusso66	support.Hardware	6	15 October 2004 18:10
Bizarre problem on boot up	Steve	support.Hardware	42	02 October 2003 01:04

07 October 2001, 21:51	#2
Akira Registered User Join Date: May 2001 Location: # Posts: 12,584	Dunno why it has a reset button, since the Amigas are resetted with a key combination (!?!) Sorry I cannot be of help, this just sounds strange

11 February 2007, 18:29	#4
Smiley Amiga-less! Join Date: Feb 2005 Location: UK Posts: 1,346	Thought I would reply to a nice obsolete thread. The reset pins are located on the micronik busboards. You cannot use the reset lead without the appropriate busboard. Unless you want to go soldering your A1200 mobo. Sorry for the 6 year wait T0Mi

12 February 2007, 07:06	#5
Chain A-Collector, repairments Join Date: Jul 2001 Location: Czech Rep. Age: 39 Posts: 1,490	if you dont want to solder on board directly, i can recommend one fo those "pcmcia reset fix" sockets from amigakit

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)