IDE units 2 and 3 are lost

thomas · 17 February 2018, 14:52

WinUAE 3.5 does not allow so select IDE units 2 or 3. Only 1 and 2 are selectable.

However, if you select SCSI unit 2 and then change it to IDE, it keeps the 2 as unit.

Toni Wilen · 17 February 2018, 22:32

Fixed. I changed it to only show ports 3 and 4 if controller supports IDE doubler and have compatible driver but I forgot to mark A600/A1200/A4000 as doubler supported..

17 February 2018, 14:52	#1
thomas Registered User Join Date: Jan 2002 Location: Germany Posts: 6,985	IDE units 2 and 3 are lost WinUAE 3.5 does not allow so select IDE units 2 or 3. Only 1 and 2 are selectable. However, if you select SCSI unit 2 and then change it to IDE, it keeps the 2 as unit.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lost partitions on winuae ide and real amiga	vertigo	support.Other	2	08 July 2015 13:07
For Sale - Sega MegaDrive II's with Region Free Switchless Mod (15 units)	fitzsteve	MarketPlace	4	05 November 2013 19:58
Creating network device driver: multiple units?	tnt23	Coders. System	1	26 July 2013 09:18
Finding available floppy drive units	Yesideez	Coders. Asm / Hardware	2	23 November 2012 19:07
PAL filter five units to left	Leandro Jardim	support.WinUAE	8	17 January 2012 04:13

17 February 2018, 22:32	#2
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,502	Fixed. I changed it to only show ports 3 and 4 if controller supports IDE doubler and have compatible driver but I forgot to mark A600/A1200/A4000 as doubler supported..

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)