A3640 Rev 3.3 PCBs - Page 3

plasmab · 26 July 2017, 15:23

I am in for 10 for sure. I can go up to 15 if nobody else is in.

Sent from my iPhone using Tapatalk

Mr.Flibble · 26 July 2017, 17:37

Yeah, I can probably stretch to 15 if it means making the order

Currently we have 50 at the low end, 75 at the upper end, not including Mathesar at the moment.

Edit: I also had the same email from Admatec, but I don't have a company so couldn't order from them anyway.

thebajaguy · 27 July 2017, 01:23

I'm willing to buy 10 connectors.

grelbfarlk · 27 July 2017, 02:22

Maybe we could get a quote from a different distributor? I really don't want to spend over $100 when I will probably never use 8 of them.

Mr.Flibble · 27 July 2017, 08:27

That's the thing, there aren't any other distributors with different pricing.

If you only want a couple, then only commit to a couple, or wait until we order and get a couple of connectors from one of us who ordered?

plasmab · 27 July 2017, 08:30

Quote:

Originally Posted by Mr.Flibble

That's the thing, there aren't any other distributors with different pricing.

If you only want a couple, then only commit to a couple, or wait until we order and get a couple of connectors from one of us who ordered?

Indeed. That's a good price folks.
KEL aren't a distributor... KEL are the manufacturer.

Sent from my iPhone using Tapatalk

dalek · 27 July 2017, 15:05

I'd be in for 2. Will be needing at least one for my TF4060 after all

Mr.Flibble · 27 July 2017, 20:34

I have a small stack of PCB's

mattymuc · 28 July 2017, 01:08

I am also in for 10 for sure.

Mr.Flibble · 28 July 2017, 10:16

Here's a pic of the old and new boards..

plasmab · 28 July 2017, 10:33

Quote:

Originally Posted by Mr.Flibble

Here's a pic of the old and new boards..

That really needs those pals and bus buffers replaced with cplds

Sent from my iPhone using Tapatalk

arananet · 28 July 2017, 13:49

Quote:

Originally Posted by Mr.Flibble

Here's a pic of the old and new boards..

Looks great! I need a few too.

Mathesar · 28 July 2017, 15:42

Quote:

Originally Posted by dalek

I'd be in for 2. Will be needing at least one for my TF4060 after all

I'm also in for two.
I only want a nice open-source replacement for my CSMKIII.

grelbfarlk · 29 July 2017, 01:31

Quote:

Originally Posted by plasmab

That really needs those pals and bus buffers replaced with cplds

Sent from my iPhone using Tapatalk

Do you want the source for the pals? I know you're a super busy guy but how difficult assuming you had a chance to look at it would it be to add some RAM?

What's the connector count up to now?

Thinking about it I have a dead A3640 (board is ruined), I'd like a PCB if anyone has an extra that they've had produced.

Also redesign unless it was vastly different would preclude using Speedgeek's 030 state machine pals, someone want to sweet talk him into giving up the source?

Another idea, going in the minimal changes category, maybe rearrange a couple of the components on the right corner of the board so the 040-060 adapter bottom board could be soldered directly to it, really just those resistor nets would have to be moved.

Chucky · 29 July 2017, 08:54

So anyone actually can order those connectors.. I want a bunch aswell..
or should I start to try to find?

Mr.Flibble · 29 July 2017, 10:06

Minimum order from Admatec is 201, I think we were seeing if we had enough interested parties to put in an order...

Current interest stands at 99...

plasmab · 29 July 2017, 10:11

Quote:

Originally Posted by grelbfarlk

Do you want the source for the pals? I know you're a super busy guy but how difficult assuming you had a chance to look at it would it be to add some RAM?

What's the connector count up to now?

Thinking about it I have a dead A3640 (board is ruined), I'd like a PCB if anyone has an extra that they've had produced.

Also redesign unless it was vastly different would preclude using Speedgeek's 030 state machine pals, someone want to sweet talk him into giving up the source?

Another idea, going in the minimal changes category, maybe rearrange a couple of the components on the right corner of the board so the 040-060 adapter bottom board could be soldered directly to it, really just those resistor nets would have to be moved.

I can reverse engineer PAL jeds pretty easily.

Chucky · 29 July 2017, 11:00

Just to inform (to keep on topic) that I just got a SMS telling that DHL Expressshipping is getting ready.. so it is all packed now.

plasmab · 29 July 2017, 11:03

Quote:

Originally Posted by Chucky

Just to inform (to keep on topic) that I just got a SMS telling that DHL Expressshipping is getting ready.. so it is all packed now.

Swap you one for a TF328?

Chucky · 29 July 2017, 11:51

Sure..

26 July 2017, 17:37	#42
Mr.Flibble Registered User Join Date: Jun 2015 Location: UK Posts: 472	Yeah, I can probably stretch to 15 if it means making the order Currently we have 50 at the low end, 75 at the upper end, not including Mathesar at the moment. Edit: I also had the same email from Admatec, but I don't have a company so couldn't order from them anyway. Last edited by Mr.Flibble; 26 July 2017 at 17:42.

28 July 2017, 10:16	#50
Mr.Flibble Registered User Join Date: Jun 2015 Location: UK Posts: 472	Here's a pic of the old and new boards.. Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Commodore A3640 Rev. 3.1 watchdog mod	trixeo	Hardware mods	2	01 March 2014 11:45
A3640 rev 3.2	bpco	MarketPlace	1	27 May 2010 09:15
FS: Minimig PCBs and Keyrah FS	Kristian95	MarketPlace	7	03 October 2007 12:33
Ebay at 1 USD : A3640 Rev 3.1 for Amiga 4000 running at 32 Mhz !!!	Effy	MarketPlace	21	01 August 2005 15:05
A3640 Rev 3.0 accelerator card problem	Tony Landais	support.Hardware	3	23 December 2003 09:41

26 July 2017, 15:23	#41
plasmab Banned Join Date: Sep 2016 Location: UK Posts: 2,917	I am in for 10 for sure. I can go up to 15 if nobody else is in. Sent from my iPhone using Tapatalk

27 July 2017, 01:23	#43
thebajaguy Registered User Join Date: Mar 2017 Location: Rhode Island / United States Posts: 201	I'm willing to buy 10 connectors.

27 July 2017, 02:22	#44
grelbfarlk Registered User Join Date: Dec 2015 Location: USA Posts: 2,902	Maybe we could get a quote from a different distributor? I really don't want to spend over $100 when I will probably never use 8 of them.

27 July 2017, 08:27	#45
Mr.Flibble Registered User Join Date: Jun 2015 Location: UK Posts: 472	That's the thing, there aren't any other distributors with different pricing. If you only want a couple, then only commit to a couple, or wait until we order and get a couple of connectors from one of us who ordered?

27 July 2017, 15:05	#47
dalek Registered User Join Date: Nov 2014 Location: NSW/Australia Posts: 462	I'd be in for 2. Will be needing at least one for my TF4060 after all

27 July 2017, 20:34	#48
Mr.Flibble Registered User Join Date: Jun 2015 Location: UK Posts: 472	I have a small stack of PCB's

28 July 2017, 01:08	#49
mattymuc Registered User Join Date: Jul 2017 Location: Munich / Germany Posts: 88	I am also in for 10 for sure.

29 July 2017, 08:54	#55
Chucky Registered User Join Date: Mar 2015 Location: Karlstad / Sweden Age: 52 Posts: 1,210	So anyone actually can order those connectors.. I want a bunch aswell.. or should I start to try to find?

29 July 2017, 10:06	#56
Mr.Flibble Registered User Join Date: Jun 2015 Location: UK Posts: 472	Minimum order from Admatec is 201, I think we were seeing if we had enough interested parties to put in an order... Current interest stands at 99...

29 July 2017, 11:00	#58
Chucky Registered User Join Date: Mar 2015 Location: Karlstad / Sweden Age: 52 Posts: 1,210	Just to inform (to keep on topic) that I just got a SMS telling that DHL Expressshipping is getting ready.. so it is all packed now.

29 July 2017, 11:51	#60
Chucky Registered User Join Date: Mar 2015 Location: Karlstad / Sweden Age: 52 Posts: 1,210	Sure..

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)