English Amiga Board


Go Back   English Amiga Board > Support > support.Amix

 
 
Thread Tools
Old 25 March 2016, 16:59   #1
mackbw
 
Posts: n/a
What graphics cards work with X11R5 in Amiga Unix?

I am in the market for a RTG graphics card for my A2000 Amix Box. I have an Ingenieur Helfrich Piccolo that works on my A3000 box just fine at 1152x900_60 - I believe in 256 colors. If I push the resolution higher then than, the screen seems to behave like an interlaced screen (probably poor refresh rate).

I have a Merlin - which seems to be referenced at the Unofficial Amiga Unix page as workable, but mine was never updated and just crashes. Wondering if it would be a good graphics card if fixed, or if I'm better just looking for another card.

From what I've read, Picasso II works, but what about Picasso II+ or Picasso IV?

There was a post that said that the Piccolo SD64 didn't work, but I take some reports of "didn't work" with a grain of salt, as it is easier to have something not work due to a bad config vs finally getting something to work.

So I'm wondering what do others have experience getting working - preferably first hand knowledge. Also, how hard have you pushed it comfortably?

Regards,

Mack
 
Old 25 March 2016, 18:14   #2
dannyp1
Registered User
 
Join Date: Nov 2009
Location: Michigan USA
Posts: 168
I have an A2410 in the UX that I have partly assembled. I got it because it was the card made for the UX. I have no idea how well it is going to work.
dannyp1 is offline  
Old 20 April 2016, 03:35   #3
mackbw
 
Posts: n/a
After performing the bus fix to my Merlin, it now works in X. I had to do some mode line timing adjustments to display nicely with my LCD monitor, but it works as well as my Piccolo.

So here's the info we have thus far:

Under X11R5 installations with SVGA driver:

Personal experience:
Ingenieur Helfrich Piccolo at 1152x900 60 Hz x 256 colors
Xpert Merlin at 1152x900 60 Hz x 256 colors
I could push the cards to higher resolutions, but those were interlaced and were hard to read on my LCD. Don't know if it's possible to push the cards harder at higher resolutions progressive scan.

From FsUAE and others experience
Picasso II works.
Not sure about resolutions.

and solely from within FsUAE
Picasso II+ works
Not sure about resolutions.

From Commodore Literature / Others Experience
We know the Commodore A2410 card works in X11R4, but don't know about X11R5.

Anyone else have anything to add?
 
Old 20 April 2016, 13:43   #4
Noth
Registered User
 
Noth's Avatar
 
Join Date: Aug 2013
Location: Lausanne, Switzerland
Posts: 184
https://amix.failsure.net/Hardware
Noth is offline  
Old 14 April 2019, 01:24   #5
k0x
Registered User
 
Join Date: Jan 2018
Location: Ostrava
Posts: 124
Anybody tried Matze's Picasso II+ reproduction?

https://webstore.kryoflux.com/catalo...products_id=56
k0x is offline  
Old 25 July 2022, 01:06   #6
Flash951
Registered User
 
Join Date: Feb 2015
Location: Lier / Norway
Posts: 103
I've tested with GVP Spectrum 24 (Zorro II mode). It shows only a pink screen in xwin. In Winuae emulating Spectrum 24 (zorro ii) it works, booting the same CF-card disk as on my Amiga 3000. Strange thing.
Flash951 is offline  
Old 30 July 2022, 12:01   #7
Wrangler
Registered User
 
Join Date: Sep 2015
Location: London, UK
Posts: 414
As you know, I got the Piccolo to work and the Lowell/A2410 is known to work too (although I haven't tested that myself). From mackbw's post in 2016, it looks like he got the Merlin working too.

I don't know if anyone else has tried the Spectrum though
Wrangler is offline  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Graphics Cards - What Are They Good For? Fingerlickin_B support.Hardware 86 08 October 2010 12:13
Graphics cards brett71 support.Hardware 41 27 July 2010 17:23
All about Amiga graphics cards JACK98 New to Emulation or Amiga scene 13 19 May 2009 17:54
Disabling Graphics Cards CU_AMiGA support.Hardware 22 25 February 2007 21:24
Amiga Graphics cards DDNI support.Hardware 15 29 September 2006 20:47

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 15:49.

Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Page generated in 0.07670 seconds with 15 queries