Graffiti and indvision ECS

source · 21 December 2013, 02:25

I was wondering can the graffiti component to the Indvision ECS allow you to have a 256 color workbench, or is it just for specific programs that are specially written for the Graffiti.
Thanks

CrashMidnick · 22 December 2013, 22:32

http://www.a1k.org/forum/showthread.php?p=508355

source · 28 December 2013, 02:07

Thanks

source · 26 January 2014, 19:26

I am trying to get Graffiti to work on my A500 with a indvisionECS ACA500 and ACA1232. I Flashed the indivision ECS to version 1.01, I loaded the config program and set it to 1.25 + graffiti. That seemed to go well. I installed MMUTools and when I boot the computer after the install, when it attempts to load MUfastrom it says please insert Volume Workbench in DH0: If I put a ;before the MMUFastrom command in user-startup Workbench loads fine. (I named my SYS: as Workbench

I attempted to install picasso96 on my machine, it states that there is already a picassoII install. (I am trying to install Picasso on a fresh install with AOS3.9 with BB2) No other graffics card is installed. I selected the Graffity mode on the Picasso install. When I reboot the computer it comes up with Devs:monitors not an executable file. When I load PicasssoPrefs there is only a Village64 config. There is no graffiti board to load in. I have always had trouble with Picasso96 I have never been able to install it. I do not know what I am doing wrong each time. Some help would be greatly appreciated. I know it works. A lot of people here use P96. but I just can't ever seem to get it to work.
The link above goes to Picasso96 V 2.0. Where do I get V2.3 - is 2.3 another name for 2.1c?

source · 02 February 2014, 01:04

Has anyone here attempted to use the Picasso Drive with the indivision ECS on an amiga 500? I seed to be able now to get the different screen modes listed when I load the screenmode prefs program, but when I try to test the screen mode, the monitor is unable to sync to it.

21 December 2013, 02:25	#1
source Zone Friend Join Date: Jul 2005 Location: Toronto, Canada Posts: 734	Graffiti and indvision ECS I was wondering can the graffiti component to the Indvision ECS allow you to have a 256 color workbench, or is it just for specific programs that are specially written for the Graffiti. Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Graffiti card	Highwayman	support.Apps	30	09 January 2013 10:31
Emulation of Graffiti chunky graphics device	pmc	request.UAE Wishlist	29	30 November 2011 18:52
Graffiti video demo??	DDNI	Retrogaming General Discussion	0	22 July 2008 23:24
ECS Agnus / Full ECS ChipSets....	Chapas	support.WinUAE	7	17 June 2005 05:27
Humans ECS?	Tommo	request.Old Rare Games	3	17 September 2001 17:26

22 December 2013, 22:32	#2
CrashMidnick Registered User Join Date: Jun 2010 Location: FRANCE Posts: 222	http://www.a1k.org/forum/showthread.php?p=508355

28 December 2013, 02:07	#3
source Zone Friend Join Date: Jul 2005 Location: Toronto, Canada Posts: 734	Thanks

26 January 2014, 19:26	#4
source Zone Friend Join Date: Jul 2005 Location: Toronto, Canada Posts: 734	I am trying to get Graffiti to work on my A500 with a indvisionECS ACA500 and ACA1232. I Flashed the indivision ECS to version 1.01, I loaded the config program and set it to 1.25 + graffiti. That seemed to go well. I installed MMUTools and when I boot the computer after the install, when it attempts to load MUfastrom it says please insert Volume Workbench in DH0: If I put a ;before the MMUFastrom command in user-startup Workbench loads fine. (I named my SYS: as Workbench I attempted to install picasso96 on my machine, it states that there is already a picassoII install. (I am trying to install Picasso on a fresh install with AOS3.9 with BB2) No other graffics card is installed. I selected the Graffity mode on the Picasso install. When I reboot the computer it comes up with Devs:monitors not an executable file. When I load PicasssoPrefs there is only a Village64 config. There is no graffiti board to load in. I have always had trouble with Picasso96 I have never been able to install it. I do not know what I am doing wrong each time. Some help would be greatly appreciated. I know it works. A lot of people here use P96. but I just can't ever seem to get it to work. The link above goes to Picasso96 V 2.0. Where do I get V2.3 - is 2.3 another name for 2.1c?

02 February 2014, 01:04	#5
source Zone Friend Join Date: Jul 2005 Location: Toronto, Canada Posts: 734	Has anyone here attempted to use the Picasso Drive with the indivision ECS on an amiga 500? I seed to be able now to get the different screen modes listed when I load the screenmode prefs program, but when I try to test the screen mode, the monitor is unable to sync to it.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)