English Amiga Board


Go Back   English Amiga Board > Support > New to Emulation or Amiga scene

 
 
Thread Tools
Old 16 January 2010, 00:27   #1
Amiga Forever
Registered User
 
Join Date: Jan 2010
Location: UK
Posts: 228
Question Amiga game files transfer from pc to amiga?

i have been searching on google if I could get the wire that I can connect from pc to amiga then when I download Amiga whload games from pc to amiga but the questions is where can I get them please? The wires I am looking for ...so that i can connect pc to the amiga

Last edited by Amiga Forever; 16 January 2010 at 00:37.
Amiga Forever is offline  
Old 16 January 2010, 00:37   #2
prowler
Global Moderator
 
prowler's Avatar
 
Join Date: Aug 2008
Location: Sidcup, England
Posts: 10,300
Hi Amiga Forever,

Are you talkiing about the Amiga Explorer Null-Modem Serial Cable?
http://www.amigaforever.com/kb/13-105

Last edited by prowler; 16 January 2010 at 00:55.
prowler is offline  
Old 16 January 2010, 01:14   #3
Amiga Forever
Registered User
 
Join Date: Jan 2010
Location: UK
Posts: 228
no....but do you think this one will do it? Pc TO Amiga PARALLEL LINK CABLE?
Amiga Forever is offline  
Old 16 January 2010, 01:17   #4
prowler
Global Moderator
 
prowler's Avatar
 
Join Date: Aug 2008
Location: Sidcup, England
Posts: 10,300
It depends what software you are using to carry out the file transfer.

Do you have a link for that cable?
prowler is offline  
Old 16 January 2010, 01:34   #5
Amiga Forever
Registered User
 
Join Date: Jan 2010
Location: UK
Posts: 228
Do you have a link for that cable?

http://amigakit.leamancomputing.com/...roducts_id=247

or

this one
I couldnt find this one on ebay
http://picturepush.com/public/2780834

http://www1.picturepush.com/photo/a/...ous/images.jpg
Amiga Forever is offline  
Old 16 January 2010, 01:44   #6
prowler
Global Moderator
 
prowler's Avatar
 
Join Date: Aug 2008
Location: Sidcup, England
Posts: 10,300
Quote:
Originally Posted by Amiga Forever View Post
That cable looks OK, if you download the PC2AMIGA software.


Quote:
Originally Posted by Amiga Forever View Post
That looks like a USB card reader. It could be used to write files to a CF card on your PC and then transfer them to your Amiga with the card fitted into your PCMCIA port via a PCMCIA-CF adapter (though I'm not sure that is a CF card; it could be an MMC card).
prowler is offline  
Old 16 January 2010, 01:53   #7
Amiga Forever
Registered User
 
Join Date: Jan 2010
Location: UK
Posts: 228
Quote:
That looks like a USB card reader. It could be used to write files to a CF card on your PC and then transfer them to your Amiga with the card fitted into your PCMCIA port via a PCMCIA-CF adapter (though I'm not sure that is a CF card; it could be an MMC card).
I see. if i CF Card reader then i am trying find it on ebay but i cant find it
Amiga Forever is offline  
Old 16 January 2010, 01:55   #8
Amiga Forever
Registered User
 
Join Date: Jan 2010
Location: UK
Posts: 228
I put ebay search as "cf card reader" and it give me loads of lists
I dont know which one to get as i am unsure of it.
Amiga Forever is offline  
Old 16 January 2010, 01:59   #9
prowler
Global Moderator
 
prowler's Avatar
 
Join Date: Aug 2008
Location: Sidcup, England
Posts: 10,300
Look for a CF card reader which plugs into the USB port of your PC. If you are using it with an existing card which is compatible with your Amiga, then you are almost guaranteed to be able to read it in your PC with just about any adapter. To be absolutely certain, make sure that the adapter will take Type II CF cards (nearly all of them will). Avoid anything which mentions 'CardBus'.

The PC's USB interface is not quite so fussy as the Amiga's PCMCIA and IDE interfaces.
prowler is offline  
Old 16 January 2010, 11:46   #10
Jonathan Drain
Registered User
 
Join Date: Sep 2009
Location: Sector K240
Posts: 338
Read How do I transfer Amiga disks?, although it's out of date and doesn't mention CF/SD cards, which are the best option now in my opinion.

Summary of your main options:

1. External CF/SD card reader for Amiga. A PCMCIA reader is cheap, works with A1200 and A600, and gives you fast, high-capacity, hot-swappable disks readable on PC. Drawback: You need to use another method to get drivers to the Amiga first, requires an Amiga with PCMCIA.
2. Internal IDE to CF/SD convertor. Works with any Amiga. Drawback: You need to open the Amiga up to remove the card, requires an Amiga with IDE (not A500).
3. CrossDOS. Comes with Workbench 2 and 3, lets you read/write 720KB formatted PC disks in Amiga. A good fallback option if you have no special hardware, useful to install the drivers needed for other transfer devices. Drawback: Slow, PCs often have no disk drive, files over 720KB must be split into smaller parts.
4. Amiga Explorer software with serial null modem cable (possibly parallel, I haven't tested it). Auto-installs its own software to the Amiga over the serial cable. Much better than PC2Amiga, which I think is an old DOS app, and I couldn't get it to work with WinXP. Drawback: Slower than SD cards, you need a PC that still has serial ports, Amiga Explorer is shareware.
5. Put a 2.5" hard disk in the Amiga, plug it into the PC with a hard disk enclosure, read its filesystem via WinUAE. Drawback: Have to open Amiga up to remove the disk, requires IDE.
6. PCMCIA ethernet networking solution for Amiga. Drawback: Lots of software to install, setup and run, probably too much effort just to copy diskfiles around.

Mainly, if you have A1200 or A600 I recommend a PCMCIA SD card adaptor, which you can find drivers for on aminet (fat95.lha and cfd.lha) and install those to your hard disk or Workbench disk. You can copy the drivers using a PC floppy disk and CrossDOS. I'll update my article soon.
Jonathan Drain is offline  
Old 16 January 2010, 13:51   #11
Amiga Forever
Registered User
 
Join Date: Jan 2010
Location: UK
Posts: 228
Smile

that is very interesting Jonathan Drain
I going to get CF Card reader USB on ebay
Amiga Forever is offline  
Old 16 January 2010, 14:45   #12
Amiga Forever
Registered User
 
Join Date: Jan 2010
Location: UK
Posts: 228
should I get this one?

it say

* 100% Brand New Item
* Support USB V2.0 full speed specification and USB Device Class
* Hot swapping, insert and remove cards without turning system power off
* Green LED for status indication
* Read High speed over 4.3Mbps
* Write High speed over 1.3Mbps
* Support WIN98/2000/XP or higher
* Support the following cards:

CompactFlash I/II Slot: CF Card, CF II Card, CF Ultra II, CF Extreme III, Micro Drive

MMC /SD Slot: SD Card, Mini SD Card, SD Ultra II, SD Extreme III, MMC Card, MMCII Card, RS-MMC Card, HS-MMC Card, SDC Card, T-Flash

MS /MS Pro Slot: MS Card, MS Pro Card, MS MG Card, MS MG Pro Card, MS Pro Ultra II, MS Pro Extreme III, MS Duo Card, MS MG Duo Card, MS Pro Duo Card, MS MG Pro Duo Card

SM / xD Slot: xD Picture Card, Smart Media Card


http://cgi.ebay.co.uk/SD-MS-CF-TF-MM...item414c3c10ce
Amiga Forever is offline  
Old 16 January 2010, 16:22   #13
Jonathan Drain
Registered User
 
Join Date: Sep 2009
Location: Sector K240
Posts: 338
Looks okay. Only 17 minutes to go

On the Amiga side I have one of these PCMCIA cards and it works fine the drivers from Aminet I mentioned.
Jonathan Drain is offline  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
How do I transfer ADF files to floppy disk for use on a real Amiga? Bad Mr Frosty Amiga scene 9 30 July 2013 19:53
Easiest Way to Transfer Files From PC to Amiga 2000? Tempest 2084 support.Hardware 18 24 August 2012 23:49
The Easy way to transfer ADF files from PC to Amiga adewakd support.Other 0 12 March 2008 15:28
Transfer dms and lha files from pc to amiga. djthunder New to Emulation or Amiga scene 1 24 August 2006 05:49
Ethernet connection Amiga-PC. How to transfer files using Amiga Explorer?? Flachkoepper support.Apps 5 21 October 2004 19:20

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 14:44.

Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Page generated in 0.10072 seconds with 15 queries