09 January 2012, 22:52 | #1 |
Registered User
Join Date: Jul 2006
Location: Sunderland
Posts: 946
|
Hi
All my Harddrive folders i.e WB3.0 WB3.01 etc Have all stopped booting up , all the paths are right for the directories DH0 DH0 Directory Path Is there any other setting in Winuae that would stop them booting ? They have worked no problem for years till the weekend Thanks in Advance David Just noticed all the Classic Workbenches boot up no problem, just the configs I made! These are booting up as they are hardfiles, its the directories that wont boot Its looking like some read only problem? If I alter configs and change anything and save, it is back to original config? Last edited by prowler; 10 January 2012 at 22:49. Reason: Back-to-back posts merged. |
10 January 2012, 09:23 | #2 |
Registered User
Join Date: Jan 2002
Location: Germany
Posts: 6,985
|
|
10 January 2012, 11:40 | #3 |
Registered User
Join Date: Jul 2006
Location: Sunderland
Posts: 946
|
I have a seperate HD for all Commodore stuff i.e
D:/Commodore/Amiga/ Everything on this drive seems to have gone read only and no matter how many times i try to change attributes it always goes back to read only. I'm in process of restoring back-up of operating systems the hardfiles boot up Classic etc but none of the selected HD folders |
10 January 2012, 13:06 | #4 |
Registered User
Join Date: Jul 2006
Location: Sunderland
Posts: 946
|
Well reinstalled windows and reistalled Winuae ,checked all configs and paths ,all Ok ,hardfiles boot no probs any Hardrive folders will not boot just returns to dos.
I am totally beat here :-( |
10 January 2012, 13:58 | #5 |
Registered User
Join Date: Jul 2006
Location: Sunderland
Posts: 946
|
Installed Winuae on wife laptop copied 1 harddrive folder over, all the configs and all kicks, Exactly the same, this this has something to do with my backups on CD being read only, if you uncheck the read only box on properties it goes ahead and scans ,but when you properties again they have gone back to read only, I have looked about and this seem a common problem on windows 7 not being able to remove read only ?
|
11 January 2012, 21:04 | #6 |
Registered User
Join Date: Jul 2006
Location: Sunderland
Posts: 946
|
Anyone shed any light on this please ?
|
11 January 2012, 21:14 | #7 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
Check winuaelog.txt for clues. (Enable checkbox in misc panel)
|
11 January 2012, 22:27 | #8 |
Registered User
Join Date: Jul 2006
Location: Sunderland
Posts: 946
|
Cheers Toni I will try this!
|
12 January 2012, 00:04 | #9 |
Registered User
Join Date: Jul 2006
Location: Sunderland
Posts: 946
|
Just found a different old backup of Harddrives folder and these boot up fine?
Still cannot find a reason why mine stopped booting |
12 January 2012, 08:18 | #10 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
It is wrong log. WinUAE GUI -> Miscellaneous -> tick "Create Log file".
Following file will be created: Quote:
|
|
12 January 2012, 08:22 | #11 |
Registered User
Join Date: Jul 2006
Location: Sunderland
Posts: 946
|
Ah OK
Here is correct one:- 2012-01-12 07:21:56 56-758 [1 000x000]: P96FREQ: 312*49.9201 = 15575.0799 / 50 = 311 56-761 [1 000x000]: PAL mode V=49.9201Hz H=15575.0799Hz (227x312+1) 56-776 [2 216x237]: Fastcard: mapped @$200000: 8MB fast memory 56-776 [2 216x237]: Card 1 (ZorroII) done. 56-776 [2 226x237]: Filesystem: mapped memory @$e90000. 56-776 [2 226x237]: Card 2 (ZorroII) done. 56-776 [2 226x237]: Memory map after autoconfig: 56-776 [2 226x237]: 00000000 2048K/1 = 2048K Chip memory 56-776 [2 226x237]: 00200000 8192K/1 = 8192K Fast memory 56-776 [2 226x237]: 00A00000 1984K/0 = 1984K <none> 56-776 [2 226x237]: 00BF0000 64K/0 = 64K CIA 56-776 [2 226x237]: 00C00000 1536K/0 = 1536K <none> 56-776 [2 226x237]: 00D80000 256K/0 = 256K Gayle (low) 56-776 [2 226x237]: 00DC0000 64K/0 = 64K Battery backed up clock (MSM6242B) 56-776 [2 226x237]: 00DD0000 128K/0 = 128K Gayle (high) 56-776 [2 226x237]: 00DF0000 64K/0 = 64K Custom chipset 56-777 [2 226x237]: 00E00000 512K/1 = 512K Kickstart ROM (FC24AE0D) 56-777 [2 226x237]: =KS ROM v3.1 (A500,A600,A2000) rev 40.63 (512k) 56-777 [2 226x237]: 00E80000 64K/0 = 64K <none> 56-777 [2 226x237]: 00E90000 64K/0 = 64K Filesystem Autoconfig Area 56-777 [2 226x237]: 00EA0000 384K/0 = 384K <none> 56-777 [2 226x237]: 00F00000 64K/1 = 64K UAE Boot ROM 56-777 [2 226x237]: 00F10000 448K/0 = 448K <none> 56-778 [2 226x237]: 00F80000 512K/1 = 512K Kickstart ROM (FC24AE0D) 56-778 [2 226x237]: =KS ROM v3.1 (A500,A600,A2000) rev 40.63 (512k) 56-778 [2 226x237]: 01000000 4080M/0 = 4080M <none> 56-902 [8 226x023]: Mounting uaehf.device 0 (0): 56-902 [8 226x023]: FS: mounted virtual unit DH0 (D:\Commodore\Amiga\HardDrives\WB3.1 (Utils)) 56-902 [8 226x023]: Mounting uaehf.device 1 (0): 56-902 [8 226x023]: FS: mounted virtual unit DH1 (D:\Commodore\Amiga\DH1) 56-902 [8 226x023]: Mounting uaehf.device 2 (0): 56-902 [8 226x023]: FS: mounted virtual unit WinCD_G (G:\..) 57-043 [15 226x016]: FS: DH0 (flags=00000002,E=0,ED=1,EF=0,native='D:\Commodore\Amiga\HardDrives\WB3.1 (Utils)') starting.. 57-064 [16 226x031]: FS: DH1 (flags=00000002,E=0,ED=1,EF=0,native='D:\Commodore\Amiga\DH1') starting.. 57-176 [21 226x122]: FS: (flags=00000000,E=1,ED=0,EF=0,native='G:\..') starting.. Just returns to dos |
12 January 2012, 08:30 | #12 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
Does "D:\Commodore\Amiga\HardDrives\WB3.1 (Utils)" contain AmigaOS installation? Does s/startup-sequence exist?
|
12 January 2012, 08:52 | #13 |
Registered User
Join Date: Jul 2006
Location: Sunderland
Posts: 946
|
Funny you should mention that, alot of the file names have changed?
e.g Startup-Sequence#E783 Shell-Startup#949E Ed-startup#EB09 C:/SetPatch#F6F0 ChangeTaskPri#AF62 This is obviously what stopping the boot , but what on earth has changed all these filenames ? My old Harddrive backup set is working fine , but I wonder what caused my current folder to do this ,need to google it, thanks for you advice Toni! Last edited by Viceroy; 12 January 2012 at 09:02. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
A600 HD Bootup | tomcat666 | support.WinUAE | 12 | 19 August 2013 21:09 |
Pwr-Tower Bootup Problem | twizzle | support.Hardware | 5 | 11 October 2009 22:35 |
locked out on bootup | twizzle | support.Apps | 7 | 31 January 2008 15:06 |
PC bootup problem | Galahad/FLT | support.Other | 16 | 31 January 2008 00:57 |
603e+ weird bootup issue | Boot_WB | support.Hardware | 5 | 27 April 2005 15:45 |
|
|