help with Turbo 1230-MK2

lopos2000 · 28 April 2005, 13:56

Hi my Amiga Friends,
I just board a Turbo 1230-MK2 board for my Amiga 1200 which just fits under the trapdoor. I hope that someone can give me some more info about this board. It has also a "Magnum Rom" installed. On the board itself there is some writing on it and it says "SCSI modul". Can't see any connection for that.
So, I hope someone can help me.
Thanks
Lopos

T_hairy_bootson · 28 April 2005, 14:15

I got ebay scammed out of my Apollo... but the SCSI connector should be in between the memory slots. If not you should be able to solder one in... or find someone to do it for you.

lopos2000 · 28 April 2005, 14:28

Hi T_hairy_bootson,
Thanks for that but iI tried to find out what make the board is? Is it an Apollo ?
I don't know.
Thanks

T_hairy_bootson · 28 April 2005, 14:30

turbo 1230 mk-II... sorry I just assumed it was an apollo.

actually the mk-III has the 2 memory slots... yours should look like this:

http://www.amiga-hardware.com/showha...cgi?HARDID=108

lopos2000 · 28 April 2005, 14:46

It looks very similar to this.
Oops found it. it's a DCE: Viper 1230 Mk-II Turbo
Just wonder. Has someone here a manual or software for this board.
Thanks
Lopos

haynor666 · 27 October 2009, 09:05

Lol, after so many years I know what turbo card I have

28 April 2005, 13:56	#1
lopos2000 Zone Friend Join Date: Apr 2005 Location: Cider is best In The West Posts: 1,238	help with Turbo 1230-MK2 Hi my Amiga Friends, I just board a Turbo 1230-MK2 board for my Amiga 1200 which just fits under the trapdoor. I hope that someone can give me some more info about this board. It has also a "Magnum Rom" installed. On the board itself there is some writing on it and it says "SCSI modul". Can't see any connection for that. So, I hope someone can help me. Thanks Lopos

28 April 2005, 14:46	#5
lopos2000 Zone Friend Join Date: Apr 2005 Location: Cider is best In The West Posts: 1,238	It looks very similar to this. Oops found it. it's a DCE: Viper 1230 Mk-II Turbo Just wonder. Has someone here a manual or software for this board. Thanks Lopos Last edited by lopos2000; 28 April 2005 at 15:52.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GVP 1230 Turbo+ Jaws Problem	broddr	support.Hardware	5	30 October 2013 09:48
Testing water - Trade Typhoon 1230 MK2 for A4000 Accelerator	fitzsteve	MarketPlace	0	23 June 2010 11:03
Blizzard 1230 mk2 SCSI kit	OldB0y	MarketPlace	2	23 January 2009 10:46
Turbo 1230 problem	wakeupbomb	support.Hardware	10	02 September 2006 14:45
Viper 1230 Mk II Turbo Problems	Matfink	support.Hardware	13	01 November 2003 06:15

28 April 2005, 14:15	#2
T_hairy_bootson Workbitch 1.3 Join Date: Oct 2001 Location: Melbourne, Australia Age: 46 Posts: 2,084	I got ebay scammed out of my Apollo... but the SCSI connector should be in between the memory slots. If not you should be able to solder one in... or find someone to do it for you.

28 April 2005, 14:28	#3
lopos2000 Zone Friend Join Date: Apr 2005 Location: Cider is best In The West Posts: 1,238	Hi T_hairy_bootson, Thanks for that but iI tried to find out what make the board is? Is it an Apollo ? I don't know. Thanks

28 April 2005, 14:30	#4
T_hairy_bootson Workbitch 1.3 Join Date: Oct 2001 Location: Melbourne, Australia Age: 46 Posts: 2,084	turbo 1230 mk-II... sorry I just assumed it was an apollo. actually the mk-III has the 2 memory slots... yours should look like this: http://www.amiga-hardware.com/showha...cgi?HARDID=108

27 October 2009, 09:05	#6
haynor666 retro maniac Join Date: May 2002 Location: Tarnobrzeg/Poland Age: 45 Posts: 1,748	Lol, after so many years I know what turbo card I have

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)