GB 1000 parts list thread - Page 3

Firedawg · 07 June 2013, 22:22

Quote:

Originally Posted by Massimo_it

Yes, i'm refer to guide traslated by Kristian Karlshøj to English.

@Firedang
I see your "parts listing-a1000 Board 04.rar" i not checked well but i think is the same posted of Yakumo9275 in the post 2 of this thread.
In short the 99% of both BOM are the same, rev.4 have 12 parts more and 2 parts less.

You are correct on Partlist from Yakumo. Thanks for the information.

Slayer · 09 June 2013, 15:08

Quote:

Originally Posted by PJM

The A600s or A500+. Is easier to extract from a 500+ though as the A600 is surface mounted.

At last, I had to visit another board before I got the answer to my question from Amibay

I think I've got at least 12 x A500+ and I only need 2 Agnuses

Hopefully we can use other bits from these machines too

billt · 10 June 2013, 00:13

I received my package on Friday. Now, to move to a new house wirh room to play in, and find my tools from storage facility.

Firedawg · 30 June 2013, 04:31

I know some had requested a better board component layout.

Firedawg · 13 November 2013, 15:27

Has any body have a working board yet using the CY7C1049CV33-15VXC SRAM Memory Chips from Kipper2K? A concern has been raised as to the low voltage range (+3.3V) on the device, and if the chips should be the +5V.

Mike

shaf · 10 September 2014, 05:26

Does anyone have a copy of the english assembly manual translated by Kristian K for the initial GBA1000 Board, I lost mine when I moved.
I found a copy of the Document it is listed as Rev . 0.7.

shaf · 03 November 2014, 13:10

I found a source for the Zorro Card connector. It is Mouser PN: 587-395-100-520-808 the Manufacturer is EDAC PN: 395-100-520-808. You will need to Trim off one of the flanges otherwise the IC 43 socket is blocked.

Anonymous32768 · 02 February 2018, 19:59

Looking for a complete parts list. I have a list of all the major parts but not of all the resistors and capacitors. I also do not have a location list.

Can anyone lend a hand? I would like to build this PCB. Just need the little details and any advice you can spare!

Thanks!

ajk · 02 February 2018, 21:01

Would this help?

http://www.amigawiki.org/loc7/locator7.php

Anonymous32768 · 02 February 2018, 21:09

Oh hell yes!! That is what I needed!

Thank you sir!

Anonymous32768 · 02 February 2018, 22:01

Anyone know what the deal is with these? How do I program them? Im a bit of a newbie on the CPLD / FPGA programming.

Thanks!

ajk · 02 February 2018, 22:13

GALs can be programmed with many fairly inexpensive Chinese programmers and the LSI chip with a parallel cable (if you have an older PC available). Or someone can do them for you. I suggest browsing through this build thread on Amibay, it goes through most of the things you will probably encounter on the way:

http://www.amibay.com/showthread.php...rev4-Build-Log

kipper2k · 19 March 2018, 23:18

Hi all,

I am having a hard time with boxes for these boards.

If someone is willing to look after this then i will give them 2 free boards and they can look after the sale/distribution of the boards. THis way i can mail to one person and they can have the aggro of doing the admin (which i hate).

All i want is $36 USD for each motherboard, and the mailing costs
The person who wants to look after the selling etc gets 2 freebies, just send me an email. Look on my website for it (www.kipper2k.com)

solidcore · 20 March 2018, 09:26

Kipper2k , perhaps an Amigan can pay for a populated board in advance? that may shift a couple; I imagine not everyone has the skills/time to populate them themselves, therefore take pre-order on populated boards me think and see what snags.

Bprepared · 20 March 2018, 10:09

Hi Kipper, just a suggestion on the boxes, do you have a pizza joint in your facinity? Maybe they would part with a few boxes

Mick · 20 March 2018, 18:33

$36 damn. You're missing a trick there kipper, I just sent the guy building mine £100 to buy one of those Ebay ones, the guy on Ebay probably buys his boxes and still makes way more money. I know it's not very ethical that he's making such a profit for someone elses work but he's pretty much the only supplier so people are happy to pay. I'd happily pay the same for a Project Red PCB if it was available.

Quote:

Originally Posted by Bprepared

Hi Kipper, just a suggestion on the boxes, do you have a pizza joint in your facinity? Maybe they would part with a few boxes

I think he already said in the other thread he'd tried his local pizza place and had had no luck.

rlake · 05 April 2018, 05:20

How about vinyl record mailing boxes? Too small perhaps.

Mick · 06 April 2018, 00:08

Buy some of these and sell the boards at a price point that makes it worth your while going through all of the hassle selling them.

Anonymous32768 · 10 April 2018, 06:08

I am looking for a LSI 1024 programming for dummies tutorial. Anyone?

Can anyone sell me a programmed LSI chip?

Anyone?

Anonymous32768 · 14 April 2018, 19:58

I guess I will be selling my incomplete board. I cannot seem to find any information on how to program the Lattice 1024 chip nor will anyone offer to sell or program one for me.

How much is this board worth? I have over $600.00 in parts not including my labor. I have no idea if it works since I cannot get a 1024 chip for it.

Anyone interested?

10 September 2014, 05:26	#46
shaf Registered User Join Date: Jun 2012 Location: Toronto / Canada Posts: 231	Does anyone have a copy of the english assembly manual translated by Kristian K for the initial GBA1000 Board, I lost mine when I moved. I found a copy of the Document it is listed as Rev . 0.7. Last edited by shaf; 16 November 2014 at 18:09. Reason: Updated Info.

03 November 2014, 13:10	#47
shaf Registered User Join Date: Jun 2012 Location: Toronto / Canada Posts: 231	I found a source for the Zorro Card connector. It is Mouser PN: 587-395-100-520-808 the Manufacturer is EDAC PN: 395-100-520-808. You will need to Trim off one of the flanges otherwise the IC 43 socket is blocked. Last edited by shaf; 03 November 2014 at 13:11. Reason: Wrong IC Reference number

02 February 2018, 19:59	#48
Anonymous32768 Registered User Join Date: Feb 2018 Location: Marina Del Rey Posts: 13	GBA 1000 - Just received a blank PCB Looking for a complete parts list. I have a list of all the major parts but not of all the resistors and capacitors. I also do not have a location list. Can anyone lend a hand? I would like to build this PCB. Just need the little details and any advice you can spare! Thanks!

02 February 2018, 22:01	#51
Anonymous32768 Registered User Join Date: Feb 2018 Location: Marina Del Rey Posts: 13	CPLD and GAL chips - Programming - GBA 1000 Anyone know what the deal is with these? How do I program them? Im a bit of a newbie on the CPLD / FPGA programming. Thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Amiga 1000 Inboard 1000 by Spirit - help needed	amiman99	support.Hardware	0	13 December 2011 04:50
List in alphabetical order in dropdown list of Floppy Drives	Zed	request.UAE Wishlist	1	06 February 2010 17:26
Connecting Amiga 1000 DKB Insider to 1000 without daughterboard	huggies	support.Hardware	0	05 October 2008 11:10
Various parts from A1200T	Hungry Horace	MarketPlace	14	22 July 2007 11:42
The I can write an Amiga program worse than Fractal Pro for $1000 thread.	Pyromania	Amiga scene	0	21 May 2003 18:58

10 June 2013, 00:13	#43
billt Registered User Join Date: Sep 2010 Location: Maryland, USA Posts: 82	I received my package on Friday. Now, to move to a new house wirh room to play in, and find my tools from storage facility.

13 November 2013, 15:27	#45
Firedawg Registered User Join Date: May 2012 Location: Atlanta/USA Posts: 17	Has any body have a working board yet using the CY7C1049CV33-15VXC SRAM Memory Chips from Kipper2K? A concern has been raised as to the low voltage range (+3.3V) on the device, and if the chips should be the +5V. Mike

02 February 2018, 21:01	#49
ajk Registered User Join Date: May 2010 Location: Helsinki, Finland Posts: 1,341	Would this help? http://www.amigawiki.org/loc7/locator7.php

02 February 2018, 21:09	#50
Anonymous32768 Registered User Join Date: Feb 2018 Location: Marina Del Rey Posts: 13	Oh hell yes!! That is what I needed! Thank you sir!

02 February 2018, 22:13	#52
ajk Registered User Join Date: May 2010 Location: Helsinki, Finland Posts: 1,341	GALs can be programmed with many fairly inexpensive Chinese programmers and the LSI chip with a parallel cable (if you have an older PC available). Or someone can do them for you. I suggest browsing through this build thread on Amibay, it goes through most of the things you will probably encounter on the way: http://www.amibay.com/showthread.php...rev4-Build-Log

19 March 2018, 23:18	#53
kipper2k Registered User Join Date: Sep 2006 Location: Thunder Bay, Canada Posts: 4,323	Hi all, I am having a hard time with boxes for these boards. If someone is willing to look after this then i will give them 2 free boards and they can look after the sale/distribution of the boards. THis way i can mail to one person and they can have the aggro of doing the admin (which i hate). All i want is $36 USD for each motherboard, and the mailing costs The person who wants to look after the selling etc gets 2 freebies, just send me an email. Look on my website for it (www.kipper2k.com)

20 March 2018, 09:26	#54
solidcore Registered User Join Date: Sep 2017 Location: birmingham, uk Posts: 548	Kipper2k , perhaps an Amigan can pay for a populated board in advance? that may shift a couple; I imagine not everyone has the skills/time to populate them themselves, therefore take pre-order on populated boards me think and see what snags.

20 March 2018, 10:09	#55
Bprepared Registered User Join Date: Feb 2017 Location: Cirencester, UK Posts: 113	Hi Kipper, just a suggestion on the boxes, do you have a pizza joint in your facinity? Maybe they would part with a few boxes

05 April 2018, 05:20	#57
rlake Hittin' the hardware... Join Date: Feb 2002 Location: Mountain View, CA Age: 44 Posts: 156	How about vinyl record mailing boxes? Too small perhaps.

06 April 2018, 00:08	#58
Mick Registered User Join Date: Jan 2004 Location: Yorkshire Posts: 710	Buy some of these and sell the boards at a price point that makes it worth your while going through all of the hassle selling them.

10 April 2018, 06:08	#59
Anonymous32768 Registered User Join Date: Feb 2018 Location: Marina Del Rey Posts: 13	I am looking for a LSI 1024 programming for dummies tutorial. Anyone? Can anyone sell me a programmed LSI chip? Anyone?

14 April 2018, 19:58	#60
Anonymous32768 Registered User Join Date: Feb 2018 Location: Marina Del Rey Posts: 13	I guess I will be selling my incomplete board. I cannot seem to find any information on how to program the Lattice 1024 chip nor will anyone offer to sell or program one for me. How much is this board worth? I have over $600.00 in parts not including my labor. I have no idea if it works since I cannot get a 1024 chip for it. Anyone interested?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)