Amiga Forever 2012 & Mounting ISO files - Page 2

dcms61 · 26 October 2011, 01:53

dcms61 · 26 October 2011, 01:59

Sorry about that! As you notice, I have one CD in my physical drive and I used one disk image, which is not on the Workbench.

I've been experimenting with Amiga Forever 2012, and discovered that it's software and not in the config file(s) because I used the built in drive of Workbench 3.X and I'm able to load CD images with no problem. Now if only Mike can tell me what I need software wise to mount CD images because I'm running Workbench 3.9, and I'm able to mount physical CDs but not CD images, unless I use Workbench 3.X!

Thank you for all your help, assistance and patients.
Dave

Arnie · 26 October 2011, 06:54

I've had a play around with this and I think this is what you need to do.

Right click on the A4000 entry, scroll down to edit.

Click on configuration tab and tick SCSI.

Click on media tab and tick CD0

You should now get the CD icon from the start and uaescsi.device will be selected.

dcms61 · 27 October 2011, 00:02

Okay, they all were checked off. I finally figured out what the problem is/was. Under the tool types, have NONOTWAIT . I figured that out by creating a new hardfile with JUST Workbench 3.9 installed on it. I could only mount physical drives, not images. So I used Aminet Set 4, Disc 1, then I looked under Tools / Useful / Amicdrom and installed it just for the heck of it, and now I can mount ISO and .CUE files with no problem. The best part is that that it was in the Amiga Workbench and NOT with Amiga Forever 2012 ! I'm sorry for being such a big pain. I thought it was a software problem, but I couldn't figure out what it was. Now I have a sticky on my Aminet Set 4 CD ROM to remind me.

thomas · 27 October 2011, 08:55

You don't need to install additional software to have two CD drives. I told you above what is needed to have one CD drive. To add a second drive you just duplicate the CD0 file (as CD1 for example) and change Unit=0 into Unit=1.

ipp0 · 05 November 2011, 01:24

In my opinion Deamon Tools is one of the most perfect tools for Windows since there is no mount command.

I don't see. It never crashed here. And it worked with WinUAE perfectly.

26 October 2011, 01:53	#21
dcms61 David Stevens Join Date: Oct 2011 Location: Berlin/USA Posts: 22	Attached Thumbnails

26 October 2011, 06:54	#23
Arnie R.I.P Smudge 18-08-16 Join Date: Aug 2005 Location: Leicester/UK Age: 66 Posts: 3,968	I've had a play around with this and I think this is what you need to do. Right click on the A4000 entry, scroll down to edit. Click on configuration tab and tick SCSI. Click on media tab and tick CD0 You should now get the CD icon from the start and uaescsi.device will be selected. Last edited by Arnie; 02 March 2012 at 18:12.

27 October 2011, 00:02	#24
dcms61 David Stevens Join Date: Oct 2011 Location: Berlin/USA Posts: 22	Okay, they all were checked off. I finally figured out what the problem is/was. Under the tool types, have NONOTWAIT . I figured that out by creating a new hardfile with JUST Workbench 3.9 installed on it. I could only mount physical drives, not images. So I used Aminet Set 4, Disc 1, then I looked under Tools / Useful / Amicdrom and installed it just for the heck of it, and now I can mount ISO and .CUE files with no problem. The best part is that that it was in the Amiga Workbench and NOT with Amiga Forever 2012 ! I'm sorry for being such a big pain. I thought it was a software problem, but I couldn't figure out what it was. Now I have a sticky on my Aminet Set 4 CD ROM to remind me. Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Amiga Forever 2012 R2 Premium Edition	amigakit.com	MarketPlace	4	10 October 2012 16:42
Flashback 2012 Demoscene computer party 9th - 10th & 11th June 2012 - C64 - AMIGA - P	reload	News	0	24 April 2012 17:01
Amiga Forever 2012 Free Shipping AmigaKit.com	amigakit.com	MarketPlace	0	18 November 2011 18:30
Installing Amiga Forever 2012	dcms61	support.Amiga Forever	3	28 October 2011 20:54
Amiga forever 2012?	capa	support.WinUAE	4	04 October 2011 21:39

26 October 2011, 01:59	#22
dcms61 David Stevens Join Date: Oct 2011 Location: Berlin/USA Posts: 22	Sorry about that! As you notice, I have one CD in my physical drive and I used one disk image, which is not on the Workbench. I've been experimenting with Amiga Forever 2012, and discovered that it's software and not in the config file(s) because I used the built in drive of Workbench 3.X and I'm able to load CD images with no problem. Now if only Mike can tell me what I need software wise to mount CD images because I'm running Workbench 3.9, and I'm able to mount physical CDs but not CD images, unless I use Workbench 3.X! Thank you for all your help, assistance and patients. Dave

27 October 2011, 08:55	#25
thomas Registered User Join Date: Jan 2002 Location: Germany Posts: 6,987	You don't need to install additional software to have two CD drives. I told you above what is needed to have one CD drive. To add a second drive you just duplicate the CD0 file (as CD1 for example) and change Unit=0 into Unit=1.

05 November 2011, 01:24	#26
ipp0 Registered User Join Date: May 2010 Location: Bonn Posts: 37	In my opinion Deamon Tools is one of the most perfect tools for Windows since there is no mount command. I don't see. It never crashed here. And it worked with WinUAE perfectly.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)