Indivision AGA Mk II Screenmode Drivers & Software - Page 2

lurch · 21 December 2012, 22:18

Quote:

Originally Posted by kronuz

bah...I regretted ordering it straight away...but all my flatscreens has 1x vga and 1x dvi...so I thought I might as well run those instead of getting another old flatscreen.

Mine is not shipped yet...but the picture is ok, right ?

Picture is fantastic, and under workbench looks fine with the right monitor driver like the super plus etc.

Have had the odd whdload game have no display, one was oh no more lemmings. But showed up fine using an svideo adapter.

Games are stuck to the right too if you're using just the straight DVI out. But still look great, very crisp.

yssing · 22 December 2012, 14:58

I ordered mine shortly after the MKII came out, still waiting for the updates.

It would be nice if customers could atleast get a notice on what is going on.

demolition · 22 December 2012, 18:34

Am waiting for it as well, but now my MkII stopped working completely. :/

Guess I'll have to take it all apart and put it back together and see if anything is not where it should be..

Edit: Apparently the ribbon cable had come off the small DVI-pcb. It's now working again. When mounted using one screw it can rotate every time the DVI cable is connected/disconnected, causing the cable to come loose. I need to make a back plate to hold the DVI connector in place..

kronuz · 03 January 2013, 22:41

Installed mkII in my a4000d today. Picture looks just fine...like the mkI on my 1200 with no extra's, except for the picture being to the far right...leaving a fat black area on the left.

Pretty much the same level of banding.

Superplus would not allign properly...leaving a little gray on the right.
Banding improves slighty.

HiGHFX in 1024x768 fits perfectly, but is acceptably fast in max 64 colors methinks.
Banding seems the same as with superplus.
Runs a little sluggish, and is heavy on the ram ( with backdrop ), but I'll stick with this one.

All normal modes (WB or games) are faaaaar off to the right.'

HD720 is a little off to the right....and somethings jut not right...the option on my monitors to manually adjust the picture gets locked out.

heALer · 04 January 2013, 20:08

Hope an update comes soon, mine is also far to the right in games..workbench looks good though..

kronuz · 10 April 2013, 22:27

Hi again.

Is there a beta config tool floating around somewhere ?

demolition · 10 April 2013, 23:00

Quote:

Originally Posted by kronuz

Hi again.

Is there a beta config tool floating around somewhere ?

Yes, here:
http://www.a1k.org/forum/showpost.ph...&postcount=565

Also check out the EAB thread for info on using it.
http://eab.abime.net/showthread.php?t=55980&page=51

18 April 2013, 02:22

Hi,
I'm wondering if anyone else is having this issue (see pics).
I'm using the MK2 Beta Config Tools at PAL Hi Res Lace 800x600, It happens so infrequently that it does not bother me and only requires a reboot to fix.
Tho sometimes it wil boot up like this and I heve noticed it does happen when exiting out of a WHDLoad game sometimes.
I can use the Amiga for hours and everthing is OK, I've cheked that the Indi is seated correctly and it is.
Anyone else have this ? and as I said doesn't bother me as it rarely happens.
Just curious.

CFou! · 18 April 2013, 10:36

just little question...

i am not found times now to test configtool

but is it possible using it to make configuration to have smooth NTSC & PAL screen mode displayed by Indivision MK2?

if yes how?

demolition · 18 April 2013, 14:08

Quote:

Originally Posted by CFOU!

but is it possible using it to make configuration to have smooth NTSC & PAL screen mode displayed by Indivision MK2?

Don't think so as vsync is still not working.

CFou! · 18 April 2013, 17:24

Quote:

Originally Posted by demolition

Don't think so as vsync is still not working.

ok thank

so i will wait again before to use my indivision

amigappc · 06 June 2013, 17:01

Is it possible to use
SuperPlus 800x600 driver with MV1200 external scandoubler with flickerfixer?
I am trying to find adequate driver. Monitor is Eizo 15" LCD 1024x768.

roy bates · 07 June 2013, 11:55

Quote:

Originally Posted by amigappc

Is it possible to use
SuperPlus 800x600 driver with MV1200 external scandoubler with flickerfixer?
I am trying to find adequate driver. Monitor is Eizo 15" LCD 1024x768.

no i dont think so,maybe someone else knows different.

amigappc · 24 June 2013, 16:19

If someone knows, I would be grateful if they could share with me.

BarryB · 04 October 2013, 21:01

If anyone is interested I've managed to create a custom VGA res that does PAL 320x256 full screen.

In VGA Modes I simply copied the 800x600 60Hz mode and changed the Pixles/Line settings to 640/512 and hit apply. Noticed the H-Freq and V-Freq had now increased so dropped the clock from 39.909MHz to 32.759 MHz and hit apply then closed the VGA Modes box, in the config tool I selected PAL and my custom resolution, hit apply and saved the config on exit of the config tool. Booted up a floppy game and it now fills the entire screen and horizontal scrolling is quite good.

The downside is the Horizontal/Vertical alignment was out so had to adjust it in the config tool so PAL floppy games are centred on the screen but now PAL workbench programs are misaligned

This was done on a Samsung SyncMaster 226BW 22" LCD Widescreen monitor. I don't think this is to be used on a CRT monitor though in case it damages it, can someone clarify this?

johnim · 04 October 2013, 21:07

hi barry can you save the config file and post it here to try

BarryB · 04 October 2013, 21:23

Here you go! I could have made you wait until next Saturday and brought it to Play Expo

On a brighter note I solved the H/V Offset by adjusting the Overscan in Prefs, so now both PAL Workbench programs and PAL Floppy games are aligned correctly.

I should also add I was using v26 of the cores and config tool v1.2

johnim · 04 October 2013, 21:26

cheers will have a look over the weekend while sorting my replay kit out

BarryB · 04 October 2013, 21:42

Hope it's some good or can be used as a base to get a compatible config for your monitor. I know I've tried many a time to get this sorted and could never fathom it out but today something just clicked and it worked.

hansel75 · 06 October 2013, 10:49

Thanks for that info and cfg BarryB, i will also try it our the next time i am on my A1200.

Edit- I tried out your cfg but it was stretched on my 4:3 screen.

But i did have another go at my own custom cfg and managed to get a Fullscreen 640x512 mode working for games

It's still not 50hz and has no vsync, but apart from that it looks great.

I based mine off the preset Pal 640x480 option, then changed it to 640x512 with 25.339 clock with 56.863 V-Freq, tweaked the H/V Offsets(H-71 V-14) to centre it.

And it's working nicely atm for whdload games, but i have not tried a floppy game yet.

Edit- Just tried some floppy games and they fill the screen and are centered as well, i must of just lucked it

Will post my cfg here soon!

22 December 2012, 18:34	#23
demolition Unregistered User Join Date: Sep 2012 Location: Copenhagen / DK Age: 43 Posts: 4,190	Am waiting for it as well, but now my MkII stopped working completely. :/ Guess I'll have to take it all apart and put it back together and see if anything is not where it should be.. Edit: Apparently the ribbon cable had come off the small DVI-pcb. It's now working again. When mounted using one screw it can rotate every time the DVI cable is connected/disconnected, causing the cable to come loose. I need to make a back plate to hold the DVI connector in place.. Last edited by demolition; 22 December 2012 at 22:14.

18 April 2013, 02:22	#28
desdrl Posts: n/a	Strange Screen Issue Hi, I'm wondering if anyone else is having this issue (see pics). I'm using the MK2 Beta Config Tools at PAL Hi Res Lace 800x600, It happens so infrequently that it does not bother me and only requires a reboot to fix. Tho sometimes it wil boot up like this and I heve noticed it does happen when exiting out of a WHDLoad game sometimes. I can use the Amiga for hours and everthing is OK, I've cheked that the Indi is seated correctly and it is. Anyone else have this ? and as I said doesn't bother me as it rarely happens. Just curious. Attached Thumbnails

04 October 2013, 21:01	#35
BarryB Amigaholic Join Date: Dec 2009 Location: UK Posts: 4,676	If anyone is interested I've managed to create a custom VGA res that does PAL 320x256 full screen. In VGA Modes I simply copied the 800x600 60Hz mode and changed the Pixles/Line settings to 640/512 and hit apply. Noticed the H-Freq and V-Freq had now increased so dropped the clock from 39.909MHz to 32.759 MHz and hit apply then closed the VGA Modes box, in the config tool I selected PAL and my custom resolution, hit apply and saved the config on exit of the config tool. Booted up a floppy game and it now fills the entire screen and horizontal scrolling is quite good. The downside is the Horizontal/Vertical alignment was out so had to adjust it in the config tool so PAL floppy games are centred on the screen but now PAL workbench programs are misaligned This was done on a Samsung SyncMaster 226BW 22" LCD Widescreen monitor. I don't think this is to be used on a CRT monitor though in case it damages it, can someone clarify this? Last edited by BarryB; 04 October 2013 at 22:44.

06 October 2013, 10:49	#40
hansel75 Walk Off? Boolander! Join Date: Aug 2012 Location: Gladstone Australia Age: 48 Posts: 628	Thanks for that info and cfg BarryB, i will also try it our the next time i am on my A1200. Edit- I tried out your cfg but it was stretched on my 4:3 screen. But i did have another go at my own custom cfg and managed to get a Fullscreen 640x512 mode working for games It's still not 50hz and has no vsync, but apart from that it looks great. I based mine off the preset Pal 640x480 option, then changed it to 640x512 with 25.339 clock with 56.863 V-Freq, tweaked the H/V Offsets(H-71 V-14) to centre it. And it's working nicely atm for whdload games, but i have not tried a floppy game yet. Edit- Just tried some floppy games and they fill the screen and are centered as well, i must of just lucked it Will post my cfg here soon! Last edited by hansel75; 06 October 2013 at 14:14.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Compatibility Report: Indivision AGA Mk2 & Dell 2407WFP & Dell U2413M	rikbliz	support.Hardware	5	03 February 2015 13:39
Indivision AGA MK2 & A1200 shielding	manic23	support.Hardware	6	29 May 2013 08:44
Thylacine USB Drivers & Software	Cymru	support.Hardware	4	17 October 2012 16:18
For sale: Indivision AGA / IDE Fix + Express + Software	Dreamcatcher	MarketPlace	1	12 August 2010 18:56
Blizzard 1260 & Indivision AGA	Sallinen	MarketPlace	28	30 January 2009 01:46

22 December 2012, 14:58	#22
yssing Registered User Join Date: Oct 2012 Location: Denmark Posts: 22	I ordered mine shortly after the MKII came out, still waiting for the updates. It would be nice if customers could atleast get a notice on what is going on.

03 January 2013, 22:41	#24
kronuz Registered User Join Date: Jul 2012 Location: Oslo, Norway Age: 38 Posts: 26	Installed mkII in my a4000d today. Picture looks just fine...like the mkI on my 1200 with no extra's, except for the picture being to the far right...leaving a fat black area on the left. Pretty much the same level of banding. Superplus would not allign properly...leaving a little gray on the right. Banding improves slighty. HiGHFX in 1024x768 fits perfectly, but is acceptably fast in max 64 colors methinks. Banding seems the same as with superplus. Runs a little sluggish, and is heavy on the ram ( with backdrop ), but I'll stick with this one. All normal modes (WB or games) are faaaaar off to the right.' HD720 is a little off to the right....and somethings jut not right...the option on my monitors to manually adjust the picture gets locked out.

04 January 2013, 20:08	#25
heALer Registered User Join Date: Sep 2010 Location: Sweden Posts: 55	Hope an update comes soon, mine is also far to the right in games..workbench looks good though..

10 April 2013, 22:27	#26
kronuz Registered User Join Date: Jul 2012 Location: Oslo, Norway Age: 38 Posts: 26	Hi again. Is there a beta config tool floating around somewhere ?

18 April 2013, 10:36	#29
CFou! Moderator Join Date: Sep 2004 Location: France Age: 50 Posts: 4,277	just little question... i am not found times now to test configtool but is it possible using it to make configuration to have smooth NTSC & PAL screen mode displayed by Indivision MK2? if yes how?

06 June 2013, 17:01	#32
amigappc Registered User Join Date: Dec 2010 Location: Universe Age: 47 Posts: 206	Is it possible to use SuperPlus 800x600 driver with MV1200 external scandoubler with flickerfixer? I am trying to find adequate driver. Monitor is Eizo 15" LCD 1024x768.

24 June 2013, 16:19	#34
amigappc Registered User Join Date: Dec 2010 Location: Universe Age: 47 Posts: 206	If someone knows, I would be grateful if they could share with me.

04 October 2013, 21:07	#36
johnim Amibay Mod/Staff Join Date: Jun 2010 Location: birmingham uk Age: 48 Posts: 1,019	hi barry can you save the config file and post it here to try

04 October 2013, 21:26	#38
johnim Amibay Mod/Staff Join Date: Jun 2010 Location: birmingham uk Age: 48 Posts: 1,019	cheers will have a look over the weekend while sorting my replay kit out

04 October 2013, 21:42	#39
BarryB Amigaholic Join Date: Dec 2009 Location: UK Posts: 4,676	Hope it's some good or can be used as a base to get a compatible config for your monitor. I know I've tried many a time to get this sorted and could never fathom it out but today something just clicked and it worked.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)