Twinworld

[Joe Maroni]

Finding the Tiles:

1. Open Maptapper and load the savestate.
2. After scrolling through memory with default settings you may don´t find anything useful.
3. Increase Bpl width up to 512 and scroll though it again.
4. Found the tiles at $59D14 -> see attached picture.
5. Hit "Copperlist" button
6. Save Gfx as a picture
7. Load the picture in Maptapper ("Use Loaded Tiles" checkbox will be set automatically)
8. Hit "Rearrange" checkbox on bottom of Tile Ripper tab
9. write 16 in "Bpl Width" textfield and 10 in "Bpl Height" field.
10. Hit F5 or push button "Rip Tiles"

Now you can hover over the tiles and see the tile indexes in status bar

[Codetapper]

You don't need to save and re-load the tiles. Instead:

6. At the bottom of the screen, set "Actual Tile Size" to "16 x 10", otherwise it thinks the tiles are 512 x 120. Now the map ripping tab will use "16 x 10" for drawing the maps