My 1st A1200 PC Mid Tower Project 2017

iowtheme · 31 January 2017, 00:29

Hi All for 2017

I am build My 1st A1200 Tower

Please look at my web site at

http://www.2e0zak.co.uk/amiga/A1200-PC-Mid-Tower.html

If anyone has any great ideas or advice on setup a Tower up

Daedalus · 06 February 2017, 10:17

Best of luck with it, and enjoy! As for advice, make sure your motherboard is well protected from shorts against the casing, and always take everything out of the case when you're cutting it - metal filings an electronics don't mix!

If you plan on adding a Mediator later, try to have the motherboard an extra 1-1.5cm closer to the edge of the case. This will mean probably removing and modifying the existing ATX board carrier. The PCMCIA slot end of the A1200 board should be on the ground then, and the rear ports protruding through the rear of the case. The PCI cards in the Mediator *should* line up with the rear brackets then...

iowtheme · 18 February 2017, 23:00

.
.

iowtheme · 23 February 2017, 18:56

Now up and running A1200 Tower

Very BIG thank to Amigakit for all the parts for the A1200 Tower
And BIG thank to all people at eab.abime.net for help me

amigakit.com · 24 February 2017, 19:28

Looks great fun! Thanks for sharing the pics and your orders

31 January 2017, 00:29	#1
iowtheme Registered User Join Date: Mar 2010 Location: uk Posts: 214	My 1st A1200 PC Mid Tower Project 2017 Hi All for 2017 I am build My 1st A1200 Tower Please look at my web site at http://www.2e0zak.co.uk/amiga/A1200-PC-Mid-Tower.html If anyone has any great ideas or advice on setup a Tower up

18 February 2017, 23:00	#3
iowtheme Registered User Join Date: Mar 2010 Location: uk Posts: 214	New Update A1200 Tower . . Last edited by iowtheme; 23 February 2017 at 18:21.

23 February 2017, 18:56	#4
iowtheme Registered User Join Date: Mar 2010 Location: uk Posts: 214	New Update 23-2-2017 Now up and running A1200 Tower Very BIG thank to Amigakit for all the parts for the A1200 Tower And BIG thank to all people at eab.abime.net for help me

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Amiga A1200 Tower Project HELP	iowtheme	support.Hardware	1	15 January 2017 21:50
A4000D -> Tower Project	mfletcher	Hardware mods	8	10 June 2009 22:16
Akira's A1200 tower project	Amiga1992	Hardware mods	4	19 April 2009 09:21
Peter's Tower Project	Peter	Hardware mods	46	27 February 2009 17:13
A1200 Tower project	Heavyweight7t6	MarketPlace	7	29 May 2006 20:22

06 February 2017, 10:17	#2
Daedalus Registered User Join Date: Jun 2009 Location: Dublin, then Glasgow Posts: 6,351	Best of luck with it, and enjoy! As for advice, make sure your motherboard is well protected from shorts against the casing, and always take everything out of the case when you're cutting it - metal filings an electronics don't mix! If you plan on adding a Mediator later, try to have the motherboard an extra 1-1.5cm closer to the edge of the case. This will mean probably removing and modifying the existing ATX board carrier. The PCMCIA slot end of the A1200 board should be on the ground then, and the rear ports protruding through the rear of the case. The PCI cards in the Mediator should line up with the rear brackets then...

24 February 2017, 19:28	#5
amigakit.com Registered User Join Date: Aug 2004 Location: www.amigakit.com Posts: 2,029	Looks great fun! Thanks for sharing the pics and your orders

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)