Amiga 1200 CD-Rom Prob

Tonycrew · 19 May 2002, 22:00

Ok i can't get my CD-rom to work on my A1200.
I have an Ide-Buffer with a 2gig 2 1/2 inch HD.
Thats All ok boots up NP:
I have an 8meg Ram Card.
CD-Rom runs on external Power Supply.
I have installed IdeFix and atapi software.. And i can see the cdrom when i click on FINDCD I can see it under ATAPI and under CD.DEVICE
But i can't see any cdroms i insert..?
I thought i broke one of the pins on the Ide Buffer but i mustn't have..

If you could please look at the pic at the arrow point IS THAT PIN MISSING OR SHORT...? if it is Pheeew

cause so is mine,
if it isn't SHIT mines broke cause mine is only 1 mil long.

Anyway if all is ok with the Buffer anyone got any ideas..?

ElectroBlaster · 22 May 2002, 18:08

First off m8! you will be glad to know your buffer isnt broke! every one of these i have seen, mine included! are the same!

how is the cd drive setup on your system? do you have the hard drive as master on the first ide port and the cd as master on the second ide port? if you have them both as master and slave on the first ide port then you will need to edit the CD0 mount script.

All you have to do is double check your CD0 mount script that lurks in the Devs/Dosdrivers... you will need a text editor like ED to change the unit number:

Unit = 1 /* exec device unit */
Ide port1 = Hard drive master - Cdrom slave

Unit = 2 /* exec device unit */
Ide port1 = Hard drive master - Ide port2 = Cdrom master

Unit = 3 /* exec device unit */
Ide port1 = Hard drive master - Ide port2 = Cdrom slave

I hope this is whats wrong m8 as I have had to do this a few times setting up idefix97

blackcornflake · 23 May 2002, 01:10

If ElectroBlaster's good advice still doesn't do the trick, here is a link to Eyetech's Support Page on buffered interfaces and related stuff. Example configs and more tips.

Tonycrew · 23 May 2002, 17:39

Thanx guy i have sorted it out now.. although i dunno what was wrong i reinstalled idefix and it now works.

19 May 2002, 22:00	#1
Tonycrew Registered User Join Date: Feb 2002 Location: uk Posts: 54	Amiga 1200 CD-Rom Prob Ok i can't get my CD-rom to work on my A1200. I have an Ide-Buffer with a 2gig 2 1/2 inch HD. Thats All ok boots up NP: I have an 8meg Ram Card. CD-Rom runs on external Power Supply. I have installed IdeFix and atapi software.. And i can see the cdrom when i click on FINDCD I can see it under ATAPI and under CD.DEVICE But i can't see any cdroms i insert..? I thought i broke one of the pins on the Ide Buffer but i mustn't have.. If you could please look at the pic at the arrow point IS THAT PIN MISSING OR SHORT...? if it is Pheeew cause so is mine, if it isn't SHIT mines broke cause mine is only 1 mil long. Anyway if all is ok with the Buffer anyone got any ideas..? Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
cd rom drive for the amiga 1200	GurjSagoo	support.Hardware	3	13 February 2011 09:52
Amiga 1200 internal CD-Rom	Stardust	support.Hardware	5	24 June 2010 01:56
A CD-ROM drive for my Amiga 1200?	Amiga Forever	support.Hardware	9	15 January 2010 03:12
Fast-ATA, CD-Rom & cd-filesystem prob	Bamiga2002	support.Hardware	5	29 August 2009 21:52
Amiga 1200 + HP parallel port Cd-rom	zerohero	support.Hardware	4	25 August 2005 08:08

22 May 2002, 18:08	#2
ElectroBlaster Junior Member Join Date: Mar 2002 Location: Exeter, Devon, UK Age: 49 Posts: 1,705	First off m8! you will be glad to know your buffer isnt broke! every one of these i have seen, mine included! are the same! how is the cd drive setup on your system? do you have the hard drive as master on the first ide port and the cd as master on the second ide port? if you have them both as master and slave on the first ide port then you will need to edit the CD0 mount script. All you have to do is double check your CD0 mount script that lurks in the Devs/Dosdrivers... you will need a text editor like ED to change the unit number: Unit = 1 /* exec device unit / Ide port1 = Hard drive master - Cdrom slave* Unit = 2 /* exec device unit / Ide port1 = Hard drive master - Ide port2 = Cdrom master* Unit = 3 /* exec device unit / Ide port1 = Hard drive master - Ide port2 = Cdrom slave* I hope this is whats wrong m8 as I have had to do this a few times setting up idefix97

23 May 2002, 01:10	#3
blackcornflake Moderator Join Date: Feb 2002 Location: Cereal box Posts: 794	If ElectroBlaster's good advice still doesn't do the trick, here is a link to Eyetech's Support Page on buffered interfaces and related stuff. Example configs and more tips.

23 May 2002, 17:39	#4
Tonycrew Registered User Join Date: Feb 2002 Location: uk Posts: 54	Thanx guy i have sorted it out now.. although i dunno what was wrong i reinstalled idefix and it now works.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)