Ghosts N Goblins patch v0.6a for test

[CFou!]

Originally Posted by Irek´72

Today I installed the version of Denis with your installer on my Amiga.

ok it's version 3 (better)

right


can you test with joined slave (no fast slave)

if you are again access fault it's will be at $85A1A

if it's crash can you send report file again with nofast slave?

[CFou!]

can you test it too*.

nofast
+ 1 fix

[Irek´72]

OK I'll try it, but it may take a little while. I forgot to say that I tried the game from the Level 1....

[CFou!]

Originally Posted by Irek´72

OK I'll try it, but it may take a little while. I forgot to say that I tried the game from the Level 1....

NO PROBLEM

thanks for your test

i'am just retrying to play with little fix and fastmem

no crash here playing 5 first levels on 68030+mmu

[CFou!]

if both previous slave works fines

can you try this:
same than last patch but extended memory in fast memory not at $80000

[CFou!]

finally i have reproduct your crash, its caused by access at adress before fastmem base...

no crash with fast at $80000 because of course no access fault at memory before $80000


so you can stop to test i wil investigate again

[Irek´72]

OK, I have tested the two slaves and it work well here.
I must say that the second version was a bit better than the first-> I had small problems with the screen display but I finished the game in both cases.

EDIT: I just see you found the error, thank you!

[CFou!]

Originally Posted by Irek´72

OK, I have tested the two slaves and it work well here.
I must say that the second version was a bit better than the first-> I had small problems with the screen display but I finished the game in both cases.

EDIT: I just see you found the error, thank you!

ok

can you try this version (fast+new fix)?

i hope that will fixe this access fault (it's original access fault)

i have played 2 times just at level 4 without access fault

[Irek´72]

The last version works well here on my 040 CPU, many thanks!

[CFou!]

Originally Posted by Irek´72

The last version works well here on my 040 CPU, many thanks!

great

[Gaula92]

I tried the final version of the slave, and it has the same problems on a plain 68000 as initial versions had: it hangs on the piracy screen.
You made a version with this issue fixed wich I tried and confirmed working, but I think the fix never made into public slave.

[CFou!]

Originally Posted by Gaula92

I tried the final version of the slave, and it has the same problems on a plain 68000 as initial versions had: it hangs on the piracy screen.
You made a version with this issue fixed wich I tried and confirmed working, but I think the fix never made into public slave.

its possible game need a little patch for monitor better support but 68000 don"t like this

just remove it

can you try v1.1 joined version?

[Gaula92]

This version works, CFOU!
However, let's say I want do activate shot-in-jump and skip the trainer at the same time: what parameters should I pass? If I try both CUSTOM1=32 and CUSTOM1=128, I get a parameter error, since I can't give two values to the same parameter (I use AmigaDOS without Workbench at all).

[CFou!]

Originally Posted by Gaula92

This version works, CFOU!
However, let's say I want do activate shot-in-jump and skip the trainer at the same time: what parameters should I pass? If I try both CUSTOM1=32 and CUSTOM1=128, I get a parameter error, since I can't give two values to the same parameter (I use AmigaDOS without Workbench at all).

you can use
CUSTOM1=160
for (32+128)
or
CUSTOM1=%10100000

indeed 32 is bit 5 and 128 is bit 7

by example if you wnat add original cheat you must active bit 0

CUSTOM1=%10100001

ps:
i will wait to release patch update (perhaps another bug report will come)

[Gaula92]

Originally Posted by CFOU!

you can use
CUSTOM1=160
for (32+128)
or
CUSTOM1=%10100000

indeed 32 is bit 5 and 128 is bit 7

by example if you wnat add original cheat you must active bit 0

CUSTOM1=%10100001

ps:
i will wait to release patch update (perhaps another bug report will come)

Did the trick, thanks!

[Retro1234]

This is working fine with my CD32 pad Thanks again for this install of a nice conversion

[Retro1234]

If you continuously Jump with the Dpad in any direction Up,Left,Right you can fire at the same time but if I use the Blue button to jump Red button/fire becomes inactive?

[zambot3]

Some times don't shoot.