EasyNet Pro Available

amigakit.com · 10 December 2014, 21:58

* Network Configuration GUI- setup the network quickly
* Interface Configuration Utility- select network devices fast and configure them without fuss
* Hosts Manager- front end to allow you to easily manage your Amiga's network hosts list
* SMB-Connect Integration- allows you to connect to SMB network shares quickly and easily
* VNC Support- allows you to connect, view and control other network hosts
* Wireless Network Configuration Utility- straight forward modification of the WiFi settings on your Amiga
* Context Sensitive Help & AmigaGuide documentation
* Router presets for: Conexant, D-Link, Netgear, Belkin, Linksys
* I.S.P. presets
* Live Update for downloading latest version of the program
* Supports many Amiga network devices (see below)
* bsdsocket v4 compatible, based on AMITCP v4 under licence from NSDi.

Upgrade option for existing EasyNet users:
If you own the standard version of EasyNet, you can upgrade to EasyNet Pro at a discounted rate by selecting Upgrade from EasyNet in the product page. You must also include your original serial number for validation in the order comments- without this your upgrade cannot be shipped to you.

Devices Supported
EasyNet Pro supports the following Amiga SANA-II network devices:

3c589.device, prism2.device, cnet.device, FastEthernet.device, x-surf.device, rtl_8139pci.device, MediatorNET.device, usbasixeth.device, usbpegasus.device, ioblixether.device, hydra.device, dm9601eth.device, x-surf-100.device, plipbox.device

System Requirements
* Memory: 1MB available RAM
* AmigaOS version 2, 2.1, 3.0, 3.1, 3.5 or 3.9 supported
* CDROM drive or another suitable method of transferring CD contents to Amiga
* Suitable network adapter

liviux76 · 11 December 2014, 14:07

It seems interesting...

I have the standard version, if I decide to upgrade, is there the possibility to download the ISO or do I have to wait for the delivery of cdrom by mail?

amigakit.com · 11 December 2014, 20:16

Hi

Yes no problem there

Reido · 07 January 2015, 15:11

Have noticed a good speed increase over the previous version, ill try and do a comparison between the two. Just wondering, are any of the updates on live update relevant to the Pro edition? I would have updated the previous EasyNet using live update, just assuming the Pro edition has these updates built in? Only reason I ask is, on starting Pro edition it says Copyright 2013...?

liviux76 · 07 January 2015, 20:54

Quote:

Originally Posted by amigakit.com

Hi

Yes no problem there

Hello mate,
I just bought the upgrade!
Please, as you have a moment provide me with the link to download the iso file, I can't wait to test it thoroughly!

Thanks for continuing to develop software for our beloved computers!

spudje · 07 January 2015, 23:05

What actually is the difference between Easynet and Easynet Pro??

I just received a fresh copy of Easynet and PCMCIA network card. Haven't had the time yet to install.

liviux76 · 13 January 2015, 12:28

Hi amigakit,
it's almost a week since I bought the upgrade but I haven't received the link to download the iso file yet... since I think that I won't receive the cdrom within this week, could you, please, provide me with the link to the iso file?
You have my email since I also opened a ticket on your website about this request... thanks in advance!

FOL · 14 January 2015, 15:23

Quote:

Originally Posted by liviux76

Hi amigakit,
it's almost a week since I bought the upgrade but I haven't received the link to download the iso file yet... since I think that I won't receive the cdrom within this week, could you, please, provide me with the link to the iso file?
You have my email since I also opened a ticket on your website about this request... thanks in advance!

PM me your order number.

Doc Mindie · 20 January 2015, 11:34

Hi, I've just ordered the upgrade, just got an email saying "it's being picked" and hopefully I'll have it in me sticky fingers soon.

I take it, once I logged in to the website to order it, the website recognised me as a customer who bought the "normal" version? I've bought three network cards previously, each of them came with EasyNet on a CD.... and it allowed to select the "upgrade only" thingamajig without entering a serial number for the "normal" EasyNet...

Is that how it technically should be anyways?

Doc Mindie · 23 January 2015, 11:30

Received the EasyNetPro uprade in the mail yeasterday... went along and installed the Amiga with a new installation of Workbench (3.1).

After fidling around a little bit (for some reason the predefined Sky DNS IP-adresses are wrong, at least with my modem) getting the right IP's for DNS and such... and simply switching off the whole WEP/WPA access passwords for a little bit.... The Amiga was online, and as far as I could see, it was online in a "perfect" fashion.

Was a bit of fiddling trying to get AWeb to work, but once done, it was done. I mean... I didn't know I had to install ClassAct before I could open AWeb....

Now to get NetSurf to work.... I've got 32<B FAST in that computer... so I should be able to get NetSurf to work witohut installing the 2MB version... shouldn't I?

FastRobPlus · 26 January 2015, 23:37

Quote:

Originally Posted by Doc Mindie

Hi, I've just ordered the upgrade, just got an email saying "it's being picked" and hopefully I'll have it in me sticky fingers soon.

Every time I see that status from AmigaKit I visualize somebody wearing white gloves and a lab coat carefully hovering over a conveyer belt full of identical discs passing up on the not-quite-ripe ones to pick one at the peak of freshness to pack and send out.

pool7 · 02 August 2017, 21:52

Sorry for the necrobump.

Is there still an option to buy this and get a downloadable version?
Customs in my country is way strict (and corrupt) and they've "misplaced"/rejected several packages, so I can't rely on buying this and getting the physical media.

I sent an email to Amigakit sales, but haven't heard back from them yet.

TIA

FOL · 03 August 2017, 15:04

Quote:

Originally Posted by pool7

Sorry for the necrobump.

Is there still an option to buy this and get a downloadable version?
Customs in my country is way strict (and corrupt) and they've "misplaced"/rejected several packages, so I can't rely on buying this and getting the physical media.

I sent an email to Amigakit sales, but haven't heard back from them yet.

TIA

Send a support ticket, thats the quickest and easiest way to get an answer.
lots of emails daily, so cant catch them all.

Overflow · 03 August 2017, 15:10

Quote:

Originally Posted by FOL

Send a support ticket, thats the quickest and easiest way to get an answer.
lots of emails daily, so cant catch them all.

What I have done in the past when I want Matthews attention quickly, is to private message him on Amigaworld.net and/or amiga.org.
His account there is the Amigakit user.

Ofcourse, every now and then I have had to wait a bit for reply, when hes off to a amigameet somewhere etc, but generally hes been extremely responsive and helpful when I did so.

Its been a while since Ive had the need to private message him, but thats my 2 cents regardless.

Starglider 2 · 09 September 2017, 23:26

It's great that they support plipbox.

Does anyone know if this will be useful in setting up remote desktop on my accelerated A500 when I finally find the time to attack the steps from my thread? https://r.tapatalk.com/shareLink?url...0&share_type=t

Tarzin · 10 June 2020, 19:25

Hi!

Is easynet still working with Workbench 3.1.4 (I own an old version of EasyNet)
I'd like to set an ethenet bridge with my Windows 10 PC.
Will it work? (I'm nearly beginner in networking)

ancalimon · 16 January 2021, 21:11

Is there an update to Easynet Pro? Mine is 0.179 and the live update feature is not working for me.

Also I fI try to change some setting inside Amitcp

B/Amitcp.cfg, restarting easynet pro results in some error messages one of which is no valid keyfile found.

jurassicman · 16 January 2021, 23:15

Mine is 0.179 as well... I think it hasn't been updated for years but it still works well for me, on 3.1, 3.9 and also 3.1.4 AmigaOS.

10 December 2014, 21:58	#1
amigakit.com Registered User Join Date: Aug 2004 Location: www.amigakit.com Posts: 2,015	EasyNet Pro Available * Network Configuration GUI- setup the network quickly * Interface Configuration Utility- select network devices fast and configure them without fuss * Hosts Manager- front end to allow you to easily manage your Amiga's network hosts list * SMB-Connect Integration- allows you to connect to SMB network shares quickly and easily * VNC Support- allows you to connect, view and control other network hosts * Wireless Network Configuration Utility- straight forward modification of the WiFi settings on your Amiga * Context Sensitive Help & AmigaGuide documentation * Router presets for: Conexant, D-Link, Netgear, Belkin, Linksys * I.S.P. presets * Live Update for downloading latest version of the program * Supports many Amiga network devices (see below) * bsdsocket v4 compatible, based on AMITCP v4 under licence from NSDi. Upgrade option for existing EasyNet users: If you own the standard version of EasyNet, you can upgrade to EasyNet Pro at a discounted rate by selecting Upgrade from EasyNet in the product page. You must also include your original serial number for validation in the order comments- without this your upgrade cannot be shipped to you. Devices Supported EasyNet Pro supports the following Amiga SANA-II network devices: 3c589.device, prism2.device, cnet.device, FastEthernet.device, x-surf.device, rtl_8139pci.device, MediatorNET.device, usbasixeth.device, usbpegasus.device, ioblixether.device, hydra.device, dm9601eth.device, x-surf-100.device, plipbox.device System Requirements * Memory: 1MB available RAM * AmigaOS version 2, 2.1, 3.0, 3.1, 3.5 or 3.9 supported * CDROM drive or another suitable method of transferring CD contents to Amiga * Suitable network adapter

16 January 2021, 21:11	#17
ancalimon Supernormal Join Date: Jul 2007 Location: Istanbul / Turkey Age: 43 Posts: 1,410	Is there an update to Easynet Pro? Mine is 0.179 and the live update feature is not working for me. Also I fI try to change some setting inside AmitcpB/Amitcp.cfg, restarting easynet pro results in some error messages one of which is no valid keyfile found.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help with Easynet	Lnejman	support.Other	22	09 May 2014 06:04
Easynet	lolafg	support.Other	4	16 February 2014 10:49
Wanted: Two button Pro competiton pro stick, CD32 Pad and the frist kings quest	Scuba-cheese	MarketPlace	7	04 February 2011 17:20
Competetion pro extra same as Competetion pro 5000 mini?	Gordon	support.Hardware	2	09 October 2010 17:46
New EasyNet Available	amigakit.com	News	0	28 April 2006 02:07

11 December 2014, 14:07	#2
liviux76 Registered User Join Date: Jan 2014 Location: BO/Italy Posts: 711	It seems interesting... I have the standard version, if I decide to upgrade, is there the possibility to download the ISO or do I have to wait for the delivery of cdrom by mail?

11 December 2014, 20:16	#3
amigakit.com Registered User Join Date: Aug 2004 Location: www.amigakit.com Posts: 2,015	Hi Yes no problem there

07 January 2015, 15:11	#4
Reido Registered User Join Date: Feb 2013 Location: Dublin/Ireland Posts: 403	Have noticed a good speed increase over the previous version, ill try and do a comparison between the two. Just wondering, are any of the updates on live update relevant to the Pro edition? I would have updated the previous EasyNet using live update, just assuming the Pro edition has these updates built in? Only reason I ask is, on starting Pro edition it says Copyright 2013...?

07 January 2015, 23:05	#6
spudje Registered User Join Date: Dec 2014 Location: Netherlands Posts: 1,406	What actually is the difference between Easynet and Easynet Pro?? I just received a fresh copy of Easynet and PCMCIA network card. Haven't had the time yet to install.

13 January 2015, 12:28	#7
liviux76 Registered User Join Date: Jan 2014 Location: BO/Italy Posts: 711	Hi amigakit, it's almost a week since I bought the upgrade but I haven't received the link to download the iso file yet... since I think that I won't receive the cdrom within this week, could you, please, provide me with the link to the iso file? You have my email since I also opened a ticket on your website about this request... thanks in advance!

20 January 2015, 11:34	#9
Doc Mindie In deep Trouble Join Date: Sep 2004 Location: Manchester, Made in Norway Age: 51 Posts: 841	Hi, I've just ordered the upgrade, just got an email saying "it's being picked" and hopefully I'll have it in me sticky fingers soon. I take it, once I logged in to the website to order it, the website recognised me as a customer who bought the "normal" version? I've bought three network cards previously, each of them came with EasyNet on a CD.... and it allowed to select the "upgrade only" thingamajig without entering a serial number for the "normal" EasyNet... Is that how it technically should be anyways?

23 January 2015, 11:30	#10
Doc Mindie In deep Trouble Join Date: Sep 2004 Location: Manchester, Made in Norway Age: 51 Posts: 841	Received the EasyNetPro uprade in the mail yeasterday... went along and installed the Amiga with a new installation of Workbench (3.1). After fidling around a little bit (for some reason the predefined Sky DNS IP-adresses are wrong, at least with my modem) getting the right IP's for DNS and such... and simply switching off the whole WEP/WPA access passwords for a little bit.... The Amiga was online, and as far as I could see, it was online in a "perfect" fashion. Was a bit of fiddling trying to get AWeb to work, but once done, it was done. I mean... I didn't know I had to install ClassAct before I could open AWeb.... Now to get NetSurf to work.... I've got 32<B FAST in that computer... so I should be able to get NetSurf to work witohut installing the 2MB version... shouldn't I?

02 August 2017, 21:52	#12
pool7 Registered User Join Date: Jul 2017 Location: Argentina Posts: 19	Sorry for the necrobump. Is there still an option to buy this and get a downloadable version? Customs in my country is way strict (and corrupt) and they've "misplaced"/rejected several packages, so I can't rely on buying this and getting the physical media. I sent an email to Amigakit sales, but haven't heard back from them yet. TIA

09 September 2017, 23:26	#15
Starglider 2 Registered User Join Date: Jan 2014 Location: California Posts: 1,146	It's great that they support plipbox. Does anyone know if this will be useful in setting up remote desktop on my accelerated A500 when I finally find the time to attack the steps from my thread? https://r.tapatalk.com/shareLink?url...0&share_type=t

10 June 2020, 19:25	#16
Tarzin Registered User Join Date: Jul 2006 Location: Dunkerque / FRANCE Posts: 173	Hi! Is easynet still working with Workbench 3.1.4 (I own an old version of EasyNet) I'd like to set an ethenet bridge with my Windows 10 PC. Will it work? (I'm nearly beginner in networking)

16 January 2021, 23:15	#18
jurassicman Registered User Join Date: Dec 2017 Location: Sassari/Italy Posts: 867	Mine is 0.179 as well... I think it hasn't been updated for years but it still works well for me, on 3.1, 3.9 and also 3.1.4 AmigaOS.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)