05 March 2009, 21:34 | #1 |
Registered User
Join Date: Jun 2008
Location: Texas
Posts: 71
|
Compatible 50hz LCDs with ScanMagic
Hi all,
I was wondering, if anyone has ever compiled a list of LCD monitors that work with a 50hz PAL display, that is scan doubled using a Scan Magic. I've currently got one of these scandoublers running in my tower and have used it for years with a CRT, but like everyone else, tried it with an LCD and it didn't work. I can keep the CRT but the LCD would let me reclaim some deskspace. I know the solution is to use an Indivision - however, I am thinking I could probably get a bigger and better LCD than I have, that will be 50hz compatible through VGA, for the same money as an Indivision. I've seen that some Nec Multisyncs are 50hz, and seem to be going quite cheap on ebay... What are your views? Chris |
05 March 2009, 21:37 | #2 |
Thalion Webshrine
Join Date: Jan 2004
Location: Oxford
Posts: 14,337
|
Just switch the default workbench screen resolution to an NTSC screen mode and everything will be fine.
You can even force WHDload games into NTSC using a global tooltype to make sure all your favourite games work with LCD's too. If you have KS3.1 then hold down both mouse buttons after a reset and after a few seconds press space. |
05 March 2009, 21:48 | #3 |
Registered User
Join Date: Jun 2008
Location: Texas
Posts: 71
|
I've tried that already - a fair percentage of the games don't work in NTSC mode or run too fast - Lotus 2 for example.
Also, it seems my scan magic produces a very blurry image with NTSC mode enabled.... |
05 March 2009, 21:50 | #4 |
This cat is no more
Join Date: Dec 2004
Location: FRANCE
Age: 52
Posts: 8,162
|
Nec 1980xi works fine in PAL & NTSC
|
05 March 2009, 22:08 | #5 |
A-Collector, repairments
|
isnt Nec 1980xi pretty old, not produced anymore and slow (25ms)?
|
09 March 2009, 21:45 | #6 |
I hate potatos and shirts
|
I have two Fujilink 1901 who accept both PAL and NTSC modes. A wide screen and a 4:3. Both runs quite nicely on any Amiga I have.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
External ScanMagic questions | mykrowyre | support.Hardware | 0 | 18 August 2007 04:10 |
Hi, anyone has an internal DCE scanmagic/flickermagic installed on an A4000D ???? car | keropi | Hardware pics | 20 | 21 October 2006 12:28 |
3dfx & Scanmagic probleem. | wizard66 | support.Hardware | 2 | 27 July 2005 20:01 |
now i have DCE ScanMagic external working properly! | Bamiga2002 | Retrogaming General Discussion | 18 | 13 February 2005 22:14 |
Scandoubler scanmagic doesn´t work really good | Joe Maroni | support.Hardware | 11 | 30 November 2004 21:26 |
|
|