ClassicWB 3.9 and big HDD

oddodo · 18 January 2016, 15:25

Never had any problems with CLW3.9. Always copied and the SCSI.DEVICE from MyFiles->install->LargeHD ->128gb_support->SCSI.DEVICE(xxx) to DEVS: and renamed it to SCSI.DEVICE reboot and thats it.But now on the real Amiga and when i set Winuae the device to IDE i get this error

My HDD is connected to my PC with USB.

I can get it working to add this lines to the STARTUP-SEQUENCE
The only problem i get 2 reboots and that slows down the loading.

If EXISTS DEV:SCSI.DEVICE
C LOADMODULE DEVS:SCSI.DEVICE
ENDIF

fitzsteve · 18 January 2016, 15:27

CWB OS3.9 already has BB2 installed and uses the scsi.device module within the Rom update so therefore you do not need to patch the scsi device again.

If you want to use a different scsi.device than that of BB2 you can use loadmodule as you do now but you must skip the scsi device update of BB2, you can do this by editing your setpatch line to:

c:setpatch skipromupdates "scsi.device" quiet

oddodo · 18 January 2016, 15:36

Ok so i did som thing wrong with the BB2 ?
I'll try this also

fgh · 18 January 2016, 16:45

What Steve said. You didn't do anything wrong, it's a bug in bb2 scsi.device. (more info here)

oddodo · 18 January 2016, 17:12

Now i understand ;-)

18 January 2016, 15:25	#1
oddodo Registered User Join Date: Dec 2013 Location: The Neterlands Posts: 109	ClassicWB 3.9 and big HDD Never had any problems with CLW3.9. Always copied and the SCSI.DEVICE from MyFiles->install->LargeHD ->128gb_support->SCSI.DEVICE(xxx) to DEVS: and renamed it to SCSI.DEVICE reboot and thats it.But now on the real Amiga and when i set Winuae the device to IDE i get this error My HDD is connected to my PC with USB. I can get it working to add this lines to the STARTUP-SEQUENCE The only problem i get 2 reboots and that slows down the loading. If EXISTS DEV:SCSI.DEVICE C LOADMODULE DEVS:SCSI.DEVICE ENDIF

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Out of this Little Big World - Little Big Planet	s2325	Retrogaming General Discussion	3	05 April 2015 05:09
ClassicWb 3.9 an big hdd partitions	oddodo	project.ClassicWB	1	08 February 2015 23:25
how big hdd with SCSI on Blizzard 2060	radzik	support.Hardware	5	04 February 2010 13:26
Best up to date way of installing ClassicWB and WHDLoad on a large HDD	KTC	project.ClassicWB	9	03 August 2008 14:34
BIG BIG BIG WINUAE CRASH (with .dmp file included)	The Rom Alien	support.WinUAE	4	31 August 2004 20:26

18 January 2016, 15:27	#2
fitzsteve Professional slacker! Join Date: Jul 2009 Location: Kent, UK Age: 44 Posts: 6,683	CWB OS3.9 already has BB2 installed and uses the scsi.device module within the Rom update so therefore you do not need to patch the scsi device again. If you want to use a different scsi.device than that of BB2 you can use loadmodule as you do now but you must skip the scsi device update of BB2, you can do this by editing your setpatch line to: c:setpatch skipromupdates "scsi.device" quiet

18 January 2016, 15:36	#3
oddodo Registered User Join Date: Dec 2013 Location: The Neterlands Posts: 109	Ok so i did som thing wrong with the BB2 ? I'll try this also

18 January 2016, 16:45	#4
fgh Registered User Join Date: Dec 2010 Location: Norway Posts: 820	What Steve said. You didn't do anything wrong, it's a bug in bb2 scsi.device. (more info here)

18 January 2016, 17:12	#5
oddodo Registered User Join Date: Dec 2013 Location: The Neterlands Posts: 109	Now i understand ;-)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)