English Amiga Board


Go Back   English Amiga Board > Support > support.Hardware

 
 
Thread Tools
Old 12 January 2015, 03:17   #1
Pheonix
Registered User
 
Join Date: Aug 2009
Location: Waco USA
Posts: 178
Anyone with Buddha IDE & CDRom Drive?

I'm trying (while my Amigas are down,) to build an install boot disk & CD for WB 1.3 & 2.1 (Save time from hunting down all the disks for setting up my drive.) I'm working with WinUAE, and am not having many problems. Well, not any more at least. I can boot and use my virtual drive as a SCSI CDRom drive without issue. It read and works with the ISO I've created. So far, I can boot to an ADF image, which detects which KS I'm using, and installs the correct drivers. I can run the HDTools for either 1.3 or 2.1, and set up the scsi.device HDD without a problem. The ISO can then be used to put all the correct files on the correct partitions. Everything works great

The one problem I'm running into now, is how to set the disk so that it will correctly install the CD-Rom (I already know the setting will work for the HDD.) So, does anyone have a Buddha installed and is willing to test CD-Rom mount settings for a real Buddha? I'm using BabelCDFS for compatibility with KS/WB 1.3, and I believe it should work. The main issue I'm running into is if the scsi.device will work through the Buddha, because space is getting tight, and I can't quite get buddha_atapi.device to fit on the disk I'll force it if I have too, I'm sure I can save some space if I use 1.3 files on my 2.1 section of the disk. But would like confirmation, and testing if possible.

Thank you
Pheonix is offline  
AdSense AdSense  
AdSense AdSense  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Generic PCMCIA IDE CDROM Drive on Amiga amiman99 support.Hardware 4 31 January 2011 21:23
IDE CDROM / Buffered IDE / AmigaOS 3.9 MrGimper support.Hardware 2 18 September 2010 13:53
Connecting a IDE CDrom drive to my A1200 & accelerator card iowtheme support.Hardware 2 18 March 2010 22:00
FS: Buddha IDE Conroller scrappysphinx MarketPlace 8 28 October 2009 13:31
Using old PC PSU to run IDE cdrom drive on A1200 DDNI support.Hardware 11 05 October 2009 22:42

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 16:00.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Page generated in 0.15276 seconds with 12 queries