EAB CF card compatibility list - Page 3

Calgor · 09 March 2009, 15:51

I know this is a CF thread, but:

Adata 16GB Turbo Series SDHC (Class 6) working fine with IDE-SD adapter.

Note that adapter specifically says it supports bootable mode, sdhc, master/slave and ultra dma etc. More expensive adapter than CF, but cheaper memory cards.

cosmicfrog · 11 March 2009, 12:22

yay I`m CF compatible

Kingston 4GB Compact Flash Card (CF/4GB) to Amiga IDE Working
http://www.overclockers.co.uk/showpr...137&subcat=222

asm1 · 12 March 2009, 20:13

Sandisk Ultra II 2GB
http://www.7dayshop.com/catalog/prod...ucts_id=100516

Sandisk Extreme III 4GB
http://www.7dayshop.com/catalog/prod...ucts_id=101183

2GB tested and working in PCMCIA.... 4GB tested and working in both PCMCIA and IDE.

Chain · 10 May 2009, 21:50

Emtec 256MB 40x speed - does not work on CF-IDE

recognized and formatted in winuae
but im always gettting error while writing in real amiga (after some kBs), tried even FE00 maxtransfer, nothing helps

Foul · 01 June 2009, 20:47

KINGSTON SDHC 8GB CLASS 6 MEMORY CARD

+

Secure Digital SD Card To 44-Pin 2.5" IDE Adapter

infos :

Secure Digital SD Card To 44-Pin 2.5" IDE Adapter

100% BRAND NEW & NEVER USED
Hot-swapable
Converts Secure Digital Card into IDE compatible hard drives
Bootable solution for laptop computer
Power from IDE interface
You can install the OS onto the SD Card
No hard disk noise from your workstation
Compatible with MMC system specification 2.0 , SD Memory Card specification 1.0 , SDHC Memory Card
Compatible with DOS, Linux, Windows 98SE, Me, 2000, XP and Vista (and Amiga )
Support PIO, Multi-Word DMA and Ultra DMA data transfer mode
Dimensions: 53mm x 42.3mm (with 7.2mm pin)

WORKING Perfect !!! (using PFS3 with Mask 0xfffffc and MaxTransfert : 0xffff )

mai · 18 July 2009, 16:24

I have a general question.
I am planning to "reanimate" my old A1200.
I want to add a CF-card as a HDD via IDE 2.5 to CF card Adapter.
Meanwhile its known to me (after reading this thread), that i have to choose
CF cards, which are confirmed to work with the Amiga,
and now is my question:
Can i use for the Amiga almost every IDE 2.5 to CF card Adapter, which are available in various Online-shops.

prowler · 18 July 2009, 17:08

Quote:

Originally Posted by mai

Can i use for the Amiga almost every IDE 2.5 to CF card Adapter, which are available in various Online-shops.

Yes, mai. It looks like it!

mai · 18 July 2009, 17:25

Quote:

Originally Posted by prowler

Yes, mai. It looks like it!

Thanks, maybe in the near future i have more questions about this subject, especially Amiga OS installation via WinUAE, who knows.

twizzle · 25 July 2009, 15:21

Sandisk extreme 111 4gig working with fastata 111,

peak 4gig not recommended, produces errors and lost partions

Hercules · 26 July 2009, 02:16

Quote:

Originally Posted by twizzle

Sandisk extreme 111 4gig working with fastata 111,

peak 4gig not recommended, produces errors and lost partions

Their no reason why you can't go beyond 4 gig. Just make sure you have AmigaOS 3.9 'Amiga OS ROM Update' in DEVS: and you haven't added SKIPROMUPDATES to Setpatch line. DirectSCSI version of PFS 3 should let you get beyond the 4 gig barrier too, as will IDEFix. I suspect though the larger the capacity of card used, the slowly the seek time to load files (particularly with larger files) being solid state memory as apposed to using a "real hard disk". Anyone want to benchmark with aminet version of diskspeed to see if I'm right? :-)

twizzle · 26 July 2009, 13:43

hercules. peak 4gig is the make & size of the cf card

Hercules · 26 July 2009, 14:46

Quote:

Originally Posted by twizzle

hercules. peak 4gig is the make & size of the cf card

Ah, okay.

DoneYone · 03 August 2009, 18:22

Quote:

Originally Posted by thgill

Working: Kingston 4GB CompactFlash Elite Pro 133X

Worked straight away. No need to mess with any commands to get it changed from removable to fixed.

UPDATE:

I can no longer recommend this card. After adding an accelerator to my A1200, I can no longer reliably boot from it. Sometimes at power up, the machine will boot from it fine. Other times it will go to the Insert Disk screen. A simple Ctrl A+A and then it will boot off it. For an unexpanded machine probably fine, add in an accelerator and for what ever reason it has issues.

Also, doesn't work via PCMCIA.

I have an pyramid RCA120 expansion board in my A1200. The user manual says that if using the max memory (8mb in my case) it can conflict with the PCMCIA slot. Maybe that's what's wrong in your setup.

To stay on topic: I'm using the Sandisk 4gb ultra 2, and it works via IDE-CF adapter.

DyLucke · 17 August 2009, 01:05

I have one of these Kingston x133 8gb size on my ide-cf adapter and works fine. Using bliz IV and CSA 12 gauge accelerators. Partitioned in two.

FOL · 19 August 2009, 20:56

Quote:

Originally Posted by DoneYone

I have an pyramid RCA120 expansion board in my A1200. The user manual says that if using the max memory (8mb in my case) it can conflict with the PCMCIA slot. Maybe that's what's wrong in your setup.

To stay on topic: I'm using the Sandisk 4gb ultra 2, and it works via IDE-CF adapter.

I agree, its more likely and unstable accellerator, like an apollo.

Mozzerfan · 19 August 2009, 22:09

Quote:

Originally Posted by DoneYone

I have an pyramid RCA120 expansion board in my A1200. The user manual says that if using the max memory (8mb in my case) it can conflict with the PCMCIA slot. Maybe that's what's wrong in your setup.

To stay on topic: I'm using the Sandisk 4gb ultra 2, and it works via IDE-CF adapter.

I doubt it's the accelerator, because I bought it from him

It's a Microbotics 1230xa.
It works fine with a Sandisk Ultra 2 GB CF card and a Sandisk Extreme 2 GB CF card. The accelerator is also PCMCIA friendly. It can take up to 128 MB RAM and it doesn't conflict with the PCMCIA slot.
See this thread:http://eab.abime.net/showthread.php?t=41637

Anyway, IMO Sandisk cards are the most compatible.

FOL · 19 August 2009, 23:05

Quote:

Originally Posted by Mozzerfan

I doubt it's the accelerator, because I bought it from him

It's a Microbotics 1230xa.
It works fine with a Sandisk Ultra 2 GB CF card and a Sandisk Extreme 2 GB CF card. The accelerator is also PCMCIA friendly. It can take up to 128 MB RAM and it doesn't conflict with the PCMCIA slot.
See this thread:http://eab.abime.net/showthread.php?t=41637

Anyway, IMO Sandisk cards are the most compatible.

Well must be mobo specific then, cause we have sold loads of those cards as HDD solution without 1 problem.

Mozzerfan · 20 August 2009, 00:05

Quote:

Originally Posted by FOL

Well must be mobo specific then, cause we have sold loads of those cards as HDD solution without 1 problem.

Could be. Or maybe it was his CF-IDE adapter.
I can't test it myself, cause I don't have any highspeed Kingston cards.
I only have Sandisk cards, and this works for me on all my amigas (with and without accellerator card).

07 October 2009, 16:35

Seagate 2.5 GB ST1. Working fine at A4000D. (photo borrowed from ebay)

Photon · 07 October 2009, 18:29

Quote:

Originally Posted by Calgor

SanDisk Extreme IV 2GB CF in PCMCIA with Transcend PCMCIA-CF adapter working fine.

Extreme IV also works fine in all my 3 cheapo Hong Kong CF-IDE-adapters.

11 March 2009, 12:22	#42
cosmicfrog The 1 who ribbits Join Date: Apr 2006 Location: leek, Staffs, UK Age: 56 Posts: 3,557	yay I`m CF compatible Kingston 4GB Compact Flash Card (CF/4GB) to Amiga IDE Working http://www.overclockers.co.uk/showpr...137&subcat=222 Last edited by cosmicfrog; 23 January 2012 at 07:00.

01 June 2009, 20:47	#45
Foul Registered User Join Date: Jun 2009 Location: Perigueux/France Age: 49 Posts: 1,516	Working !!! KINGSTON SDHC 8GB CLASS 6 MEMORY CARD + Secure Digital SD Card To 44-Pin 2.5" IDE Adapter infos : Secure Digital SD Card To 44-Pin 2.5" IDE Adapter 100% BRAND NEW & NEVER USED Hot-swapable Converts Secure Digital Card into IDE compatible hard drives Bootable solution for laptop computer Power from IDE interface You can install the OS onto the SD Card No hard disk noise from your workstation Compatible with MMC system specification 2.0 , SD Memory Card specification 1.0 , SDHC Memory Card Compatible with DOS, Linux, Windows 98SE, Me, 2000, XP and Vista (and Amiga ) Support PIO, Multi-Word DMA and Ultra DMA data transfer mode Dimensions: 53mm x 42.3mm (with 7.2mm pin) WORKING Perfect !!! (using PFS3 with Mask 0xfffffc and MaxTransfert : 0xffff )

07 October 2009, 16:35	#59
Hessu Posts: n/a	Seagate 2.5 GB ST1. Working fine at A4000D. (photo borrowed from ebay) Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Workbench 1.3 software compatibility list	ppsh41	project.ClassicWB	18	09 September 2023 18:46
A1200 Game Compatibility List?	BarryB	support.Games	3	18 November 2011 18:29
DosFellow compatibility list and compatibility of specific games	ruffian	support.WinFellow	8	24 May 2010 19:23
68060 HD games compatibility list	robotriot	support.Games	22	25 January 2008 16:49
Old Compatibility List	eNVy	support.Games	7	10 March 2002 17:37

09 March 2009, 15:51	#41
Calgor (Amigas && Amigos)++ Join Date: Sep 2005 Location: Anrea Posts: 999	I know this is a CF thread, but: Adata 16GB Turbo Series SDHC (Class 6) working fine with IDE-SD adapter. Note that adapter specifically says it supports bootable mode, sdhc, master/slave and ultra dma etc. More expensive adapter than CF, but cheaper memory cards.

12 March 2009, 20:13	#43
asm1 Registered User Join Date: Feb 2009 Location: Glasgow, Scotland Age: 44 Posts: 637	Sandisk Ultra II 2GB http://www.7dayshop.com/catalog/prod...ucts_id=100516 Sandisk Extreme III 4GB http://www.7dayshop.com/catalog/prod...ucts_id=101183 2GB tested and working in PCMCIA.... 4GB tested and working in both PCMCIA and IDE.

10 May 2009, 21:50	#44
Chain A-Collector, repairments Join Date: Jul 2001 Location: Czech Rep. Age: 50 Posts: 1,536	Emtec 256MB 40x speed - does not work on CF-IDE recognized and formatted in winuae but im always gettting error while writing in real amiga (after some kBs), tried even FE00 maxtransfer, nothing helps

18 July 2009, 16:24	#46
mai Registered User Join Date: Feb 2008 Location: Federativnaya Respublika Germaniya Posts: 4,994	I have a general question. I am planning to "reanimate" my old A1200. I want to add a CF-card as a HDD via IDE 2.5 to CF card Adapter. Meanwhile its known to me (after reading this thread), that i have to choose CF cards, which are confirmed to work with the Amiga, and now is my question: Can i use for the Amiga almost every IDE 2.5 to CF card Adapter, which are available in various Online-shops.

25 July 2009, 15:21	#49
twizzle Registered User Join Date: Sep 2005 Location: taunton.som.uk Age: 73 Posts: 681	Sandisk extreme 111 4gig working with fastata 111, peak 4gig not recommended, produces errors and lost partions

26 July 2009, 13:43	#51
twizzle Registered User Join Date: Sep 2005 Location: taunton.som.uk Age: 73 Posts: 681	hercules. peak 4gig is the make & size of the cf card

17 August 2009, 01:05	#54
DyLucke Cookie Muncher Join Date: Nov 2008 Location: Spain Age: 49 Posts: 239	I have one of these Kingston x133 8gb size on my ide-cf adapter and works fine. Using bliz IV and CSA 12 gauge accelerators. Partitioned in two.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)