13 July 2007, 16:40 | #1 |
Kebab Lover
|
What make model is this accelerator card?
Exactly what the title says, its got a 68040 chip, and ive fitted 32mb RAM. Just wondering what make / model it is, and if anyone has got a diagram of the jumper settings. Cheers
|
13 July 2007, 16:46 | #2 |
Global Moderator
Join Date: Nov 2001
Location: Derby, UK
Age: 48
Posts: 9,355
|
Looks like the Apollo 040 I had yrs ago..
|
13 July 2007, 16:53 | #3 |
Kebab Lover
|
Cool, do you know where i can get the jumper settings from?
|
13 July 2007, 18:30 | #4 |
Moderator
Join Date: Jul 2004
Location: Norwich, Norfolk, UK
Age: 37
Posts: 11,167
|
I've got an Apollo 040, I might still have the instructions for it somewhere, I'll take a look when I get home.
|
13 July 2007, 18:31 | #5 |
Global Moderator
Join Date: Nov 2001
Location: Derby, UK
Age: 48
Posts: 9,355
|
I'm not saying it is an apollo o4o, I haven't seen one in 7 yrs
Just looks the same from memory Tho seems I might be right Loads of info http://amigahardware.mariomisic.de/c...cgi?HARDID=110 |
13 July 2007, 18:58 | #6 |
Ya' like it Retr0?
Join Date: Jul 2005
Location: United Kingdom
Age: 49
Posts: 9,768
|
indeed, thats is an Apollo A1240,
these can easly be upgraded to 060's btw for a small expence (arround £60 including components) heres a lovely picture and some tech specs http://amiga.resource.cx/exp/apollo1260 lovely cards.... ( i had a 1240 and sold it on. I still have my 060 ) |
13 July 2007, 19:21 | #7 |
Kebab Lover
|
How do i check that the RAM is being read? ive done the cpu command and the processor comes back correctly. But when i look at the ram in workbench at the top of the screen, it just reports the 2 meg. Should i be looking somewhere else?
|
13 July 2007, 19:23 | #8 |
Moderator
Join Date: Jul 2004
Location: Norwich, Norfolk, UK
Age: 37
Posts: 11,167
|
Does it say "0 other mem" in the WB title bar? If so maybe your SIMM isn't fitted properly? Or maybe it's faulty?
|
13 July 2007, 19:23 | #9 |
Kebab Lover
|
Yeah 0 other mem, would the workbench version matter for this, or will it show for any version?
|
13 July 2007, 19:25 | #10 |
Moderator
Join Date: Jul 2004
Location: Norwich, Norfolk, UK
Age: 37
Posts: 11,167
|
It shouldn't make any difference, it sounds like you've got a duff SIMM.
|
13 July 2007, 19:35 | #11 |
Moderator
Join Date: Jul 2004
Location: Norwich, Norfolk, UK
Age: 37
Posts: 11,167
|
Actually, this may be a silly question, but you have got the RAM jumper on the card set correctly, right? And you're not unknowingly running a program like "NoFastMem" or anything like that?
|
13 July 2007, 19:44 | #12 |
Kebab Lover
|
Got it sorted, i had to reseat it 3 times but its finally showing.
|
13 July 2007, 20:01 | #13 |
Moderator
Join Date: Jul 2004
Location: Norwich, Norfolk, UK
Age: 37
Posts: 11,167
|
Cool, glad you got it working
|
14 July 2007, 02:47 | #14 |
Cat lover
Join Date: May 2004
Location: Italy
Age: 54
Posts: 804
|
But doesn't 68040 need a fan? Where is it on this board?
|
14 July 2007, 05:56 | #15 |
Registered User
Join Date: Jul 2005
Location: Australia
Age: 46
Posts: 666
|
Judging by the gluey mess on the processor it did have a fan and/or heatsink attached at some point, maybe the adhesive failed and a previous owner didn't bother re-attaching it. It would be a good idea to fit another one especially if it's being used in a wedge case.
|
14 July 2007, 07:57 | #16 |
Kebab Lover
|
Ive got the fan here, there isnt a connector on the end tho. Also, what are these accelerators worth?
|
14 July 2007, 09:29 | #17 |
Registered User
Join Date: Jul 2005
Location: Australia
Age: 46
Posts: 666
|
|
14 July 2007, 13:14 | #18 | |
Ya' like it Retr0?
Join Date: Jul 2005
Location: United Kingdom
Age: 49
Posts: 9,768
|
Quote:
I could say its worth nowt, i would never buy ... blah blah is better.. but thats what pretty much starts what happened above. to get the best price there is no doubt but ebay. but be prepared it can go either way with either lack of interest or lack of bidders. but (now this will be subjective and open to all sorts but hey i have guns *on my joypad* and i will stick buy them )If you ebay this item, in good conditition you can get arround £120 area. (before you say; yes, i know they do go for cheaper now and then but they also go for more as well) I have seen 060's sell for under £100, i have seen 030's sold for over £120 so it comes down to market really but as i am bit of a ebay whore, I would say an 040 @ 25mhz with memory, average price £120, especialy if you have another sim socket installed with 64MB ram - Working boxed and drivers of course) if you look on amiga kit now, an 030 with 64MB of ram is £94. and before everyone throws thier hands up in exclamation, you also get a warrenty with that, wich considering the age of the compents is a bloody good deal considering the last 030 (blizzy mk4 with 32mb ram) on ebay i have in my watches sold for £80 if you include postage. OoOoo that reminds me I just spotted this, you will need one of these if you want to upgrade your 040 to an 060 http://cgi.ebay.co.uk/A1200-Amiga-12...QQcmdZViewItem basically a price is moot unless there is a buyer my friend, so take this post as with any other posts on what the item is worth with a pinch of salt... followed by a salt truck. |
|
14 July 2007, 13:30 | #19 | |
Kebab Lover
|
Quote:
@zetr0, cheers for the info. Another quick question about the accelerator. Ive got a 16MB and 32MB SIMM, but they both show as 16MB, is there a jumper setting im missing or do you think its a fault with the actual connector or something? Cheers |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Please help. Accelerator card breaks startup-sequence scsi.device (CF Card)? | ibsimpson | Hardware mods | 1 | 09 May 2012 16:12 |
FOR SALE!!! Blizzard PPC 1200 Top model + GFX Card for running Amiga OS4.1 | ID4 | MarketPlace | 6 | 31 May 2011 08:47 |
How do I i.d. my accelerator card? | Spadger | support.Hardware | 4 | 31 March 2006 12:36 |
unknown model card HELP to describe - look pictures | martin-flash | support.Hardware | 10 | 20 September 2005 16:03 |
Accelerator Microrobotics model M1230 XA and OS 3.5/3.9 | BooTMaker | support.Hardware | 4 | 08 January 2003 15:53 |
|
|