Picasso IV emulation problem

17 August 2014, 20:49

Has PicassoIV Zorro III mode ever worked? I have to use it in Zorro II mode. If config files are needed let me know. Workbench throws an error on boot if I check Zorro III mode in my uae config.

DarrenHD · 17 August 2014, 20:52

Quote:

Originally Posted by esc

Has PicassoIV Zorro III mode ever worked? I have to use it in Zorro II mode. If config files are needed let me know. Workbench throws an error on boot if I check Zorro III mode in my uae config.

Yes zorro III Picasso IV works in my setup. (CS PPC emulated).

18 August 2014, 05:33

@Toni - never tried Picasso IV in WinUAE before, sorry. Anyway, I tested it in a few different 2.8/2.9 betas, with the same behavior. It turns out that I can't get the card to be recognized by Picasso96 if I have any Z3 ram configured in WinUAE. No Z3 RAM, and the Picasso IV works in Zorro III mode.

I'm sure this is documented somewhere, but I haven't been able to find it. Anyway, thanks!

Toni Wilen · 18 August 2014, 08:20

Log needed. (Paths panel, click full logging, start emulation, boot until error appears, F12, Paths panel, click save all, attach file)

B14ck W01f · 18 August 2014, 11:17

Off-topic, I like Toni's new motto "No log, no help".

20 August 2014, 06:25

Attached config and logfile. Note that if I set the Z3 RAM to none, everything appears to work just fine. Using Picasso96.

Toni Wilen · 20 August 2014, 08:33

Quote:

Originally Posted by esc

Attached config and logfile. Note that if I set the Z3 RAM to none, everything appears to work just fine. Using Picasso96.

Wrong log, follow instructions exactly. (save all -file or winuaelog.txt)

btw, your config has one problem, A4000 hardware but A1200 KS ROM.

17 August 2014, 20:49	#1
esc Posts: n/a	Picasso IV emulation problem Has PicassoIV Zorro III mode ever worked? I have to use it in Zorro II mode. If config files are needed let me know. Workbench throws an error on boot if I check Zorro III mode in my uae config.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem with the Picasso config	Groundhog	support.WinUAE	5	29 May 2008 00:08
Picasso IV Flash problem (again)	mabus	support.Hardware	8	08 July 2007 01:35
Picasso IV problem with SetPatch OS3.1	Calgor	support.Hardware	0	11 June 2007 16:22
WinUAE & Picasso 96 Problem?	Mag1c1an	support.WinUAE	17	27 June 2006 23:13
Picasso II/A4000 problem	Yod@	support.Hardware	5	04 July 2005 15:41

18 August 2014, 05:33	#3
esc Posts: n/a	@Toni - never tried Picasso IV in WinUAE before, sorry. Anyway, I tested it in a few different 2.8/2.9 betas, with the same behavior. It turns out that I can't get the card to be recognized by Picasso96 if I have any Z3 ram configured in WinUAE. No Z3 RAM, and the Picasso IV works in Zorro III mode. I'm sure this is documented somewhere, but I haven't been able to find it. Anyway, thanks!

18 August 2014, 08:20	#4
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,502	Log needed. (Paths panel, click full logging, start emulation, boot until error appears, F12, Paths panel, click save all, attach file)

18 August 2014, 11:17	#5
B14ck W01f m68k all the way Join Date: Aug 2011 Location: Koalaland Posts: 523	Off-topic, I like Toni's new motto "No log, no help".

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)