REQ: Automatic resolution change ; automatic resolution detection

Borg_Number_One · 21 August 2004, 12:51

In DOSBOX Emulator there is a feature which automaticlly detects the resulution in the emulation and change the "real" window/fullscreen resolution to the same.

Could this feature be implemented into WinUAE too?
(Currently only if UAEGFX RTG is used then WinUAE supports und use that feature of automatic resolution detection/change,
but automatic resolution detection/change together with OCS, ECS, AGA is currently not supported by WinUAE.

)

21 August 2004, 13:07

You can stretch the image to the entire screen using filters and save&load filter presets on the fly if that'll solve your problem.

Borg_Number_One · 21 August 2004, 13:24

Thank you for your help.
I know this method, but it is the most tawdrily method that exist.
...that simply sucks.

Filters need further CPU-power and that sucks too.

So, direct resolution detection and change (in ECS, AGA, OCS)wold be a very, very important feature.

Toni Wilen · 21 August 2004, 14:16

Not really possible. Think about programs that mix lores and hires (for example hires in top and lores in bottom) or switch between lores/hires/laced in loading screens etc...

21 August 2004, 12:51	#1
Borg_Number_One Zone Friend Join Date: Aug 2004 Location: Germany Age: 45 Posts: 44	REQ: Automatic resolution change ; automatic resolution detection In DOSBOX Emulator there is a feature which automaticlly detects the resulution in the emulation and change the "real" window/fullscreen resolution to the same. Could this feature be implemented into WinUAE too? (Currently only if UAEGFX RTG is used then WinUAE supports und use that feature of automatic resolution detection/change, but automatic resolution detection/change together with OCS, ECS, AGA is currently not supported by WinUAE. )

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Change screen resolution	Riempie	project.ClassicWB	3	23 October 2011 11:41
Screen resolution change = crash	ral-clan	support.WinUAE	9	23 April 2011 16:41
Automatic resolution switching for different resolutions	Clark Kent	request.UAE Wishlist	5	15 September 2010 08:22
WinUAE - Cannot change display resolution...	Jorlin	support.WinUAE	0	14 June 2003 14:41
Few games don't switch resolution from video card to native amiga resolution!	digital	support.WinUAE	12	14 March 2003 13:23

21 August 2004, 13:07	#2
oldpx Posts: n/a	You can stretch the image to the entire screen using filters and save&load filter presets on the fly if that'll solve your problem.

21 August 2004, 13:24	#3
Borg_Number_One Zone Friend Join Date: Aug 2004 Location: Germany Age: 45 Posts: 44	Thank you for your help. I know this method, but it is the most tawdrily method that exist. ...that simply sucks. Filters need further CPU-power and that sucks too. So, direct resolution detection and change (in ECS, AGA, OCS)wold be a very, very important feature.

21 August 2004, 14:16	#4
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,505	Not really possible. Think about programs that mix lores and hires (for example hires in top and lores in bottom) or switch between lores/hires/laced in loading screens etc...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)