Aminet sgrab - Page 4

indigolemon · 11 April 2018, 11:44

I'd reseat any cards too, if they've been in there for a while. The usage again may have caused movement with heat expansion/contraction etc.

daxb · 11 April 2018, 16:22

Maybe it is dirt/dust/oxidation what leads to contact problems or cold solder points or the PSU is dying. If you cannot fix it by yourself then I would recommend to start a new thread about the problem. Then more experienced user can help.

nineoc · 12 April 2018, 01:33

Thanx for the feedback. Will have a look when time permits and take the next appropriate steps.

nineoc · 12 April 2018, 06:43

Well, would you believe that the machine is behaving itself at the moment? Will leave it for a bit to deal with another issue that I will post in the forum regarding networking the Amiga with a Mac and a PC.

Am reasonably comfortable with the printing project, so will leave that for a bit too.

Many thanks again to all for the support.

npagonis73 · 01 December 2020, 23:55

Hi there

I need some help into setting up the tooltypes of this app. I have set up the file tooltype fine but I need help in setting up the icon option. I read in the guide that you can create icon for the file and also default tool for this icon. I can't though see in the guide how to do that... there is only 3 lines in that section without even example.
Can anyone help;

daxb · 02 December 2020, 18:28

Maybe this function is broken? At least I couldn't get it working. SnoopDos showed that it tries to open "envarc:sys/def_Picture.info.info". The Guide says that the archive contains a template example but it seems it doesn't (Aminet archive).

npagonis73 · 02 December 2020, 19:32

Quote:

Originally Posted by daxb

Maybe this function is broken? At least I couldn't get it working. SnoopDos showed that it tries to open "envarc:sys/def_Picture.info.info". The Guide says that the archive contains a template example but it seems it doesn't (Aminet archive).

Thanks for answering. What did you put in tooltypes (ICON=?) to enable it? Maybe if i put a Def_Picture.info file in ENV:sys it would work.

Thanks again

daxb · 02 December 2020, 22:33

I tried "yes", "an_icon.info" and "an_icon".

12 April 2018, 06:43	#64
nineoc Registered User Join Date: Sep 2006 Location: Qualicum Beach Canada Age: 78 Posts: 107	Well, would you believe that the machine is behaving itself at the moment? Will leave it for a bit to deal with another issue that I will post in the forum regarding networking the Amiga with a Mac and a PC. Am reasonably comfortable with the printing project, so will leave that for a bit too. Many thanks again to all for the support. Last edited by nineoc; 12 April 2018 at 06:44. Reason: Additional information.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AMINET down?	Sinphaltimus	support.Other	7	22 July 2017 20:57
Brain Killer Aminet links changed (and a question about Aminet links)	Korodny	HOL data problems	0	26 November 2009 21:21
Aminet 2	OverDose	request.Other	11	28 July 2009 00:57
Aminet down yet again	Graham Humphrey	Amiga scene	4	20 January 2007 15:59
Aminet	Arnie	Amiga scene	9	12 August 2005 23:09

11 April 2018, 11:44	#61
indigolemon Bit Copying Bard Join Date: Jan 2017 Location: Kelty, Fife, Scotland Age: 41 Posts: 1,293	I'd reseat any cards too, if they've been in there for a while. The usage again may have caused movement with heat expansion/contraction etc.

11 April 2018, 16:22	#62
daxb Registered User Join Date: Oct 2009 Location: Germany Posts: 3,303	Maybe it is dirt/dust/oxidation what leads to contact problems or cold solder points or the PSU is dying. If you cannot fix it by yourself then I would recommend to start a new thread about the problem. Then more experienced user can help.

12 April 2018, 01:33	#63
nineoc Registered User Join Date: Sep 2006 Location: Qualicum Beach Canada Age: 78 Posts: 107	Thanx for the feedback. Will have a look when time permits and take the next appropriate steps.

01 December 2020, 23:55	#65
npagonis73 Registered User Join Date: Sep 2019 Location: Corfu / Greece Posts: 410	Hi there I need some help into setting up the tooltypes of this app. I have set up the file tooltype fine but I need help in setting up the icon option. I read in the guide that you can create icon for the file and also default tool for this icon. I can't though see in the guide how to do that... there is only 3 lines in that section without even example. Can anyone help;

02 December 2020, 18:28	#66
daxb Registered User Join Date: Oct 2009 Location: Germany Posts: 3,303	Maybe this function is broken? At least I couldn't get it working. SnoopDos showed that it tries to open "envarc:sys/def_Picture.info.info". The Guide says that the archive contains a template example but it seems it doesn't (Aminet archive).

02 December 2020, 22:33	#68
daxb Registered User Join Date: Oct 2009 Location: Germany Posts: 3,303	I tried "yes", "an_icon.info" and "an_icon".

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)