Amiga & Usb - Page 3

spock-79 · 22 December 2010, 13:03

Quote:

Originally Posted by Counia

Thanks for your message.
Where you buy the VDRIVE ?
What USB-disc you use ?

Hi,

i bought the VDrive2 over eBay from a seller in the USA, shipping was a little bit expensive... But now i have ordered a VDrive1 from eBay, that will be "only" 30€..

The only USB Hardware i tested was a no name USB Stick with 2GB.

Counia · 22 December 2010, 14:55

Rappel
Serial = 19200BPS ~ 1,875Ko/s
Parallele= 37,2Ko/s ~305000BPS
It is 20x

No device used, direct CIA programmation is more easy for me.

Quote:

Originally Posted by spock-79

Hi,

i bought the VDrive2 over eBay from a seller in the USA, shipping was a little bit expensive... But now i have ordered a VDrive1 from eBay, that will be "only" 30€..

The only USB Hardware i tested was a no name USB Stick with 2GB.

And on what Amiga you use it ?

Yes not cheep !
See cost difference between VDRIVE/VDIP, prefer VDIP (mine 17,5£ vs 21£ ).
Serial fonction is same, but now with parallele transfert is most interesting (more fast that floopy now, but code not ready).

spock-79 · 22 December 2010, 19:04

Quote:

Originally Posted by Counia

Rappel
And on what Amiga you use it ?

I used it on a A500 with kick1.3 and a Fastram Expansion, and a A600 with kick3.1, 8MB Fastram, 68010, installed OS3.1.

On both Amigas it worked very good

.

Counia · 01 January 2011, 23:33

News for parallele version:
I take time for code the "USB to Amiga" command, and litle modif on "Amiga->USB" command.
Now, USB is realy an usable mass-storage and good exchange support.
Transfert speed on my 7MHz Amiga:
USB_Import ~30Ko/s (Amiga<--VNC1L)
USB_Export ~50Ko/s (Amiga-->VNC1L)
No symetrical transfert speed, because CIA hardware validation is not used in READ therefore 3 CIA acces VS 1 in WRITE.

I do an litle video asap.

And happy new year !

pandy71 · 03 January 2011, 00:24

Happy New Year Counia! Thx for nice device!

Counia · 10 January 2011, 00:02

capri351.free.fr/Amiga/Ti_L'USB_VersParallele.avi

As promised, litle video for parallele version (i am not good photographer and keybord use in same time no arrange it).
Just copy to USB (an 512Ko ROM image), and recopy it from USB to RAM:
Amiga in low resolution for beter video visibility.

Retro1234 · 10 January 2011, 00:35

I think what youve done is realy great, which do you recomend Serial or Parallel?
Someone should make a load

spock-79 · 10 January 2011, 13:13

Quote:

Originally Posted by Counia

capri351.free.fr/Amiga/Ti_L'USB_VersParallele.avi

As promised, litle video for parallele version (i am not good photographer and keybord use in same time no arrange it).
Just copy to USB (an 512Ko ROM image), and recopy it from USB to RAM:
Amiga in low resolution for beter video visibility.

Very nice!!!

Would you also make the schematics and the software available, as for the serial version?

Counia · 10 January 2011, 23:12

--> Boo Boo
No hesitation, parallele is (25x) fast and reliable transmition in compararison to serial with noise.

--> spock-79
it is the interest of forum and partage !
At this day, no definitive hardware plan and perhaps change control-line because recuperate an E/S for 'reset' the VDIP if need and too for 'handler' codage and real Amiga device (this no my codage, but another person would do this if have time).
But if anyone want cable this 'proto' , i can communique info and existant codes, mail me for this ;-)

Counia · 27 February 2011, 01:20

I do an LZX package "Ti_L'USB-parallele.LZX ", with IFF schematic , CMD and text file.
--> http://capri351.free.fr/Amiga/Ti_L%2...-Parallele.lzx

ps: it is for parallele version.

rkauer · 27 February 2011, 04:38

Yay!

Counia · 04 April 2011, 01:27

copper in v1.3

rkauer · 04 April 2011, 05:43

Price for one printed board + the Vdrive to Brazil, good sir? I can sort all the other bits around here.

Counia · 04 April 2011, 23:23

But i sell nothing, i do just two copper last days for my personal use.

I see VDIP2 at RS-Composant for 21€ or in GB shop for 20£.

Print ".iff" with laser-printer on transparent paper, verify proportion (i print it with PC in 90% on my printer).
An pre-sensible epoxy 10minutes on sun for UV with printed-transparent and revelator and perclorure.
Or give the transparent at elecronic-shop, it can do the copper and drill it too.
Use v1.3, i hope correction is good on it (the 1.2 in photo demand modification).
If you no have electronic-shop at proximity tell me.

Sao Leopoldo it is in the south ? near Uruguay frontier ? i go sometime in the north Oyapoque(Amapa).

rkauer · 06 April 2011, 05:08

Yes, I live on the extreme south of Brazil.

The autumn is coming, the temperatures are not warm any more...

Goodbye lots of beer in one day...

Counia · 15 March 2016, 11:49

Just restore breaking links.

archive--> http://capri351.free.fr/Amiga/Ti_L%2...-Parallele.lzx
photo --> http://capri351.free.fr/Amiga/Ti_L%2...lele/Photo.zip

Now, more recent project by Ferix:
http://eab.abime.net/showthread.php?t=76866

10 September 2017, 14:19

Hello All,

I would like to know if someone could provide the old serial version schematics and code or executable commands.

I want to try it on my A500, and already have all necessary components, but can't find the sources or the compiled commands for the Serial version.

Many thanks,

JP

PS: I 'll try a PM to Counia but don't know if he is still around...

27 February 2011, 01:20	#50
Counia Registered User Join Date: Oct 2010 Location: Bx / France Posts: 26	I do an LZX package "Ti_L'USB-parallele.LZX ", with IFF schematic , CMD and text file. --> http://capri351.free.fr/Amiga/Ti_L%2...-Parallele.lzx ps: it is for parallele version. Last edited by Counia; 15 March 2016 at 10:45.

04 April 2011, 23:23	#54
Counia Registered User Join Date: Oct 2010 Location: Bx / France Posts: 26	But i sell nothing, i do just two copper last days for my personal use. I see VDIP2 at RS-Composant for 21€ or in GB shop for 20£. Print ".iff" with laser-printer on transparent paper, verify proportion (i print it with PC in 90% on my printer). An pre-sensible epoxy 10minutes on sun for UV with printed-transparent and revelator and perclorure. Or give the transparent at elecronic-shop, it can do the copper and drill it too. Use v1.3, i hope correction is good on it (the 1.2 in photo demand modification). If you no have electronic-shop at proximity tell me. Sao Leopoldo it is in the south ? near Uruguay frontier ? i go sometime in the north Oyapoque(Amapa). Last edited by Counia; 05 April 2011 at 20:54.

15 March 2016, 11:49	#56
Counia Registered User Join Date: Oct 2010 Location: Bx / France Posts: 26	Just restore breaking links. archive--> http://capri351.free.fr/Amiga/Ti_L%2...-Parallele.lzx photo --> http://capri351.free.fr/Amiga/Ti_L%2...lele/Photo.zip Now, more recent project by Ferix: http://eab.abime.net/showthread.php?t=76866 Last edited by Counia; 15 March 2016 at 12:01.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Amithlon & USB	caver99	support.Other	0	24 February 2013 11:42
Thylacine USB Drivers & Software	Cymru	support.Hardware	4	17 October 2012 16:18
Usb & WhdLoad Odd Issue	marcolau	support.Hardware	6	23 November 2009 21:50
amiga & USB	ruttolomeo	support.Hardware	3	23 February 2009 18:57
FS: Subway USB & MP3@64	Fingerlickin_B	MarketPlace	2	08 August 2008 00:55

01 January 2011, 23:33	#44
Counia Registered User Join Date: Oct 2010 Location: Bx / France Posts: 26	News for parallele version: I take time for code the "USB to Amiga" command, and litle modif on "Amiga->USB" command. Now, USB is realy an usable mass-storage and good exchange support. Transfert speed on my 7MHz Amiga: USB_Import ~30Ko/s (Amiga<--VNC1L) USB_Export ~50Ko/s (Amiga-->VNC1L) No symetrical transfert speed, because CIA hardware validation is not used in READ therefore 3 CIA acces VS 1 in WRITE. I do an litle video asap. And happy new year !

03 January 2011, 00:24	#45
pandy71 Registered User Join Date: Jun 2010 Location: PL? Posts: 2,748	Happy New Year Counia! Thx for nice device!

10 January 2011, 00:02	#46
Counia Registered User Join Date: Oct 2010 Location: Bx / France Posts: 26	capri351.free.fr/Amiga/Ti_L'USB_VersParallele.avi As promised, litle video for parallele version (i am not good photographer and keybord use in same time no arrange it). Just copy to USB (an 512Ko ROM image), and recopy it from USB to RAM: Amiga in low resolution for beter video visibility.

10 January 2011, 00:35	#47
Retro1234 Phone Homer Join Date: Jun 2006 Location: 5150 Posts: 5,773	I think what youve done is realy great, which do you recomend Serial or Parallel? Someone should make a load

10 January 2011, 23:12	#49
Counia Registered User Join Date: Oct 2010 Location: Bx / France Posts: 26	--> Boo Boo No hesitation, parallele is (25x) fast and reliable transmition in compararison to serial with noise. --> spock-79 it is the interest of forum and partage ! At this day, no definitive hardware plan and perhaps change control-line because recuperate an E/S for 'reset' the VDIP if need and too for 'handler' codage and real Amiga device (this no my codage, but another person would do this if have time). But if anyone want cable this 'proto' , i can communique info and existant codes, mail me for this ;-)

27 February 2011, 04:38	#51
rkauer I hate potatos and shirts Join Date: Oct 2007 Location: Sao Leopoldo / Brazil Age: 58 Posts: 3,482	Yay!

04 April 2011, 01:27	#52
Counia Registered User Join Date: Oct 2010 Location: Bx / France Posts: 26	copper in v1.3

04 April 2011, 05:43	#53
rkauer I hate potatos and shirts Join Date: Oct 2007 Location: Sao Leopoldo / Brazil Age: 58 Posts: 3,482	Price for one printed board + the Vdrive to Brazil, good sir? I can sort all the other bits around here.

06 April 2011, 05:08	#55
rkauer I hate potatos and shirts Join Date: Oct 2007 Location: Sao Leopoldo / Brazil Age: 58 Posts: 3,482	Yes, I live on the extreme south of Brazil. The autumn is coming, the temperatures are not warm any more... Goodbye lots of beer in one day...

10 September 2017, 14:19	#57
jp13 Posts: n/a	Hello All, I would like to know if someone could provide the old serial version schematics and code or executable commands. I want to try it on my A500, and already have all necessary components, but can't find the sources or the compiled commands for the Serial version. Many thanks, JP PS: I 'll try a PM to Counia but don't know if he is still around...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)