Warp3D issues

iRonNuke · 26 June 2019, 19:05

Hi I have a Cybervision 64/3D, and what I have understood could even Cybervision 64/3D use Warp3D, correct me if I'm wrong. I'm running AOS 3.9, have Cybergraphics 3.x. No problems when installing Warp3D for CGFX 3.x.

But, when I'm running the included demos, it crashes. WarpTest says there is no driver available. Even like ADescent for Warp3D crashes. What am I missing?

Thanks for help!

DofD · 26 June 2019, 19:41

The Warp3D 4.2 package on Aminet says it has the driver (Virge) and supports the CV3D. I would check that you have the W3D_Virge.library installed.

iRonNuke · 26 June 2019, 19:46

Quote:

Originally Posted by DofD

The Warp3D 4.2 package on Aminet says it has the driver (Virge) and supports the CV3D. I would check that you have the W3D_Virge.library installed.

Yes both W3D_Virge.library and W3D_CyberGFX.library are installed in Libs:Warp3D. But is that enough? Will it just access the files when it launches a Warp3D app?

DofD · 26 June 2019, 20:12

It should find them okay. Did the installation of Warp3D go okay? No errors?

You could try this in your startup sequence to see if it helps, if it's not already there.

assign libs: sys:libs/Warp3D ADD

iRonNuke · 26 June 2019, 22:30

Quote:

Originally Posted by DofD

It should find them okay. Did the installation of Warp3D go okay? No errors?

You could try this in your startup sequence to see if it helps, if it's not already there.

assign libs: sys:libs/Warp3D ADD

I tried that now, and checked with Assign that it was added. But still the same thing. I ran Snoopdos and it seems that it loads both cybergraphics.library (Ver 0) and Wark3D.library (Ver 2) when I try a Warp3D app, but with results OK.

My cgxsystem.library is v42.1
warp3d.library is v4.2
W3D_CyberGFX.library is v4.0
W3D_Virge.library is v3.0

Thanks for the help though!

DofD · 27 June 2019, 00:42

It sounds like a config thing with Warp3D and what driver to use. Unfortunately I don't CGFX or Warp3D to check further for you.

iRonNuke · 27 June 2019, 16:57

Quote:

Originally Posted by DofD

It sounds like a config thing with Warp3D and what driver to use. Unfortunately I don't CGFX or Warp3D to check further for you.

Thanks for the help anyway!

Cowcat · 28 June 2019, 09:01

Besides low Virge memory: The need of full cybergraphics driver 4.x (not 3.x) and warp3d version settings (v3 or v4). I don't remember if last warp3d needs latest cybergfx or by the same token old test warp3d programs were compiled with those in mind .

26 June 2019, 19:05	#1
iRonNuke Registered User Join Date: Jun 2019 Location: Huskvarna Posts: 13	Warp3D issues Hi I have a Cybervision 64/3D, and what I have understood could even Cybervision 64/3D use Warp3D, correct me if I'm wrong. I'm running AOS 3.9, have Cybergraphics 3.x. No problems when installing Warp3D for CGFX 3.x. But, when I'm running the included demos, it crashes. WarpTest says there is no driver available. Even like ADescent for Warp3D crashes. What am I missing? Thanks for help!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help with Warp3D and Voodoo 3	remig	support.Hardware	8	28 March 2018 17:13
Issue with C and Warp3D	Hedeon	Coders. C/C++	5	12 June 2017 09:30
PowerUp and Warp3d	Zilog	request.Other	5	13 August 2014 18:02
warp3d patch?	roy bates	request.Other	8	02 January 2012 13:35
Warp3D in WinUAE !!!	RetroMan	Amiga scene	17	21 July 2003 21:18

26 June 2019, 19:41	#2
DofD Registered User Join Date: Jun 2018 Location: Victoria, Canada Age: 56 Posts: 134	The Warp3D 4.2 package on Aminet says it has the driver (Virge) and supports the CV3D. I would check that you have the W3D_Virge.library installed.

26 June 2019, 20:12	#4
DofD Registered User Join Date: Jun 2018 Location: Victoria, Canada Age: 56 Posts: 134	It should find them okay. Did the installation of Warp3D go okay? No errors? You could try this in your startup sequence to see if it helps, if it's not already there. assign libs: sys:libs/Warp3D ADD

27 June 2019, 00:42	#6
DofD Registered User Join Date: Jun 2018 Location: Victoria, Canada Age: 56 Posts: 134	It sounds like a config thing with Warp3D and what driver to use. Unfortunately I don't CGFX or Warp3D to check further for you.

28 June 2019, 09:01	#8
Cowcat Registered User Join Date: Apr 2013 Location: Mallorca Posts: 758	Besides low Virge memory: The need of full cybergraphics driver 4.x (not 3.x) and warp3d version settings (v3 or v4). I don't remember if last warp3d needs latest cybergfx or by the same token old test warp3d programs were compiled with those in mind .

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)