22 December 2009, 19:32 | #1 |
Registered User
Join Date: Dec 2009
Location: Germany
Posts: 28
|
Anyone here with a GVP A3001 Board?
Does anyone here have a GVP A3001 030 Board and can provide me an Image of the gvpat.device boot rom and/or the binddrivers file for the Expansion drawer in version 2.5 or higher?
Thanks very much in advance. |
22 December 2009, 19:36 | #2 |
Registered User
Join Date: Sep 2004
Location: Tacoma, WA USA
Age: 52
Posts: 1,915
|
|
22 December 2009, 19:45 | #3 |
Registered User
Join Date: Dec 2009
Location: Germany
Posts: 28
|
i know this link and have already tried the supplied 4.1 rom.
i doesn't load here. seems to be intended for the A3001 Series II Board (this has different deviceID) i also tried the rom 4.0 from FrenchShark from this thread: http://eab.abime.net/showthread.php?t=39568&page=2 it loads and stays resident, but no devices are detected... |
24 December 2009, 03:07 | #4 |
I hate potatos and shirts
|
As I already said, the FrenchShark's binddrivers version of GVPAT.device works flawlessly on mine 4.x A3001.
I didn't removed the ROM, instead I unloaded the drivers from memory, boot from a GVP SCSI controller. |
10 February 2010, 20:33 | #5 |
Registered User
Join Date: Dec 2009
Location: Germany
Posts: 28
|
OK, i am still into this issue.
Digged around my disks i found Version 1.3, 2.3, 3.2 and 3.3 of the gvpat.device for the Expansion drawer. So i removed the crappy 2.3 ROM and loaded the 3.3 with binddrivers and successfully setup a 630 MByte Seagate HDD without any problems. But i want to autoboot from this drive! Plugged the eprom back, system starts to boot but crashes while loading from the drive. Thy old gvpat.device 2.3 doesn't correctly recognize the drive that i setup with v3.3. So the bootrom does NOT load the 3.3 device from the RDB. But strange: i read out the eprom with my prommer and didn't find any version number in it?? Anyone with a GVP A3001: Please do a version gvpat.device and if you have a version higher than 3.2 please respond here. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
GVP A3001 and A2091 Together in an A2000 | gkreymer | support.Hardware | 11 | 04 August 2013 17:15 |
Swap GVP A3001 8MB for A2630 | TheCorfiot | MarketPlace | 0 | 27 July 2013 21:45 |
Has anyone bought new GVP board? | kipper2k | MarketPlace | 0 | 20 May 2009 14:49 |
GVP A3001 030 SIMM install/removal | TjLaZer | support.Hardware | 0 | 21 June 2007 07:06 |
A1200 GVP Board | Mick_AKA | MarketPlace | 6 | 07 June 2005 13:35 |
|
|