21 March 2005, 09:34 | #1 |
Workbitch 1.3
Join Date: Oct 2001
Location: Melbourne, Australia
Age: 46
Posts: 2,084
|
A2000 GVP Impact 8meg card jumper settings
My GVP Impact memory expansion card for my A2000 arived today.
It's the second card on this page: http://amiga.resource.cx/exp/search....ny=gvp#gvp2008 or on the big book of hardware this entry: http://www.amiga-hardware.com/showha...gi?HARDID=1009 So the problem I have is as the card is fully populated with 8meg and my a2091 has 2meg, this exceeds the maximum amount available on the zorro bus (or so I have read) making the machine unbootable (yellow screen).I removed my a2091 card to test the GVP card and the machine works fine. I then tried removing 2 meg off the GVP card but jumper settings need to be changed in order to make it work as workbench still reports the card has a full 8meg. Removing 2meg off the a2091 is not an option as it may slow the Hard disk access down to a crawl. So wondering if anyone knows the jumper settings or has a manual they could scan for this particular card. |
21 March 2005, 13:26 | #2 | |
Registered User
Join Date: Jul 2003
Location: Budapest / Hungary
Posts: 73
|
Quote:
Best wishes Andras Petri |
|
21 March 2005, 13:53 | #3 |
Workbitch 1.3
Join Date: Oct 2001
Location: Melbourne, Australia
Age: 46
Posts: 2,084
|
Thank you a_petri, those jumper settings did work, in a way.
If I just close 7 and 8 as the Big Book of Hardware recommends, then a DF1??? icon appears on the workbench, even though there is no disk in df1, then when I reset the Amiga a red screen appears with the following information: ------------------------------- System Expansion Board Check Status Manufacturer Product OK 2017 11 OK 2017 10 BAD 2017 10 CONTINUE ------------------------------- If I close jumper 10 as well as 7 and 8 then the df1: problem disappears but the red screen still appears on reboot. Workbench does correctly display 6meg in both cases, I am running the card alone on the A2000 at the moment without the A2091 card, Kickstart 2.0 (37.300) Any ideas anyone? |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
A2000 mainboard jumper settings | LUKas007 | support.Hardware | 10 | 14 October 2021 06:54 |
Solved a prob with the GVP Impact Series II A2000-HC+8 (Don't know how!) | Rick Dangerous | support.Hardware | 1 | 16 January 2016 14:10 |
GVP Impact A2000-2B (Series 1?) jumper info | Jope | support.Hardware | 2 | 14 July 2013 13:45 |
Problems with A2000 and GVP Impact II SCSI 2 | soulboy | support.Hardware | 3 | 16 December 2009 00:40 |
GVP Impact A2000-HC+8 Series II | Loedown | MarketPlace | 0 | 13 April 2009 06:23 |
|
|