help with Mechforce screen resolutions

03 January 2005, 15:54

hi .
when ever I try to run Mechforce if i turn on interlace compensation ,while the screen looks a lot better all the commands on the bottom are mostly missing, cut of by the edge of the screen.
when I run it with Interlace compensation on and everything else turned off while it looks better the resulting screen size looks like a postage stamp and is quite diffuclt to read .

05 January 2005, 09:09

Hi,

It is possible your game uses overscan : the display is greater than the standard Amiga resolution (320x240 or 640x480 in x2), and so a part of the picture is missing. On this case, I don't suggest using interlace compensation but just choosing a higher resolution (400x300 or 800x600 e.g.).

If your screen looks a bit broken, it's possible the standard WinFellow refreshing mode doesn't match with your monitor : put the "Frameskip" setting on 1, the scrolling is gonna be a little uglier but the game should render correctly.

Tell me about your results

06 January 2005, 13:30

I tried playing around with the screen res . currently its set at 1024x768 16 bit colour .
The game I was told runs in Hi-res ,well thats what i was told as to why the screen shakes , even when I used to run it on my 1084s it still shook a little .
I fixed it thou , turned on interlace compensation and double vertical lines . While its now a large rectangle I can play with that .
Thanks .

01 May 2005, 05:44

Guys,

Can you share will me your settings to get MechForce up and running properly on your setups? It keeps hanging on my Linux (Debian) 0.8.22 setup, especially once combat starts for real.

Thanks,
John

EmuChicken · 02 May 2005, 18:04

interlace compensation, multiple buffers, untick lo-resolution... 640x480 line mode normal

ECS graphics, original blitter mode

and I dont have the foggiest in getting to any action- sorry :-s

andreas · 10 June 2005, 22:11

Quote:

Originally Posted by l8gravely

Guys,

Can you share will me your settings to get MechForce up and running properly on your setups? It keeps hanging on my Linux (Debian) 0.8.22 setup, especially once combat starts for real.

Thanks,
John

Well, this is WinFellow forum, not WinUAE forum.

03 January 2005, 15:54	#1
Unregistered Posts: n/a	help with Mechforce screen resolutions hi . when ever I try to run Mechforce if i turn on interlace compensation ,while the screen looks a lot better all the commands on the bottom are mostly missing, cut of by the edge of the screen. when I run it with Interlace compensation on and everything else turned off while it looks better the resulting screen size looks like a postage stamp and is quite diffuclt to read .

05 January 2005, 09:09	#2
Tarnyko Posts: n/a	Hi, It is possible your game uses overscan : the display is greater than the standard Amiga resolution (320x240 or 640x480 in x2), and so a part of the picture is missing. On this case, I don't suggest using interlace compensation but just choosing a higher resolution (400x300 or 800x600 e.g.). If your screen looks a bit broken, it's possible the standard WinFellow refreshing mode doesn't match with your monitor : put the "Frameskip" setting on 1, the scrolling is gonna be a little uglier but the game should render correctly. Tell me about your results Last edited by Paul; 05 January 2005 at 10:37. Reason: Deleted direct signature

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Screen resolutions	dtr1001	support.FS-UAE	2	22 August 2013 00:36
Mechforce HQ	Voigoth	support.Games	5	26 November 2012 16:54
No sound in Mechforce	superfly2000	support.WinUAE	10	11 April 2011 20:30
MechForce	rmcin329	support.Games	17	03 September 2008 05:18
Screen resolutions - Amiga software	Ozyris	support.WinUAE	0	19 January 2008 02:59

06 January 2005, 13:30	#3
Pirate Pete Posts: n/a	I tried playing around with the screen res . currently its set at 1024x768 16 bit colour . The game I was told runs in Hi-res ,well thats what i was told as to why the screen shakes , even when I used to run it on my 1084s it still shook a little . I fixed it thou , turned on interlace compensation and double vertical lines . While its now a large rectangle I can play with that . Thanks .

01 May 2005, 05:44	#4
l8gravely Posts: n/a	Guys, Can you share will me your settings to get MechForce up and running properly on your setups? It keeps hanging on my Linux (Debian) 0.8.22 setup, especially once combat starts for real. Thanks, John

02 May 2005, 18:04	#5
EmuChicken Senior Member Join Date: Jul 2004 Location: Nagoya, Japan (moved!) Age: 41 Posts: 746	interlace compensation, multiple buffers, untick lo-resolution... 640x480 line mode normal ECS graphics, original blitter mode and I dont have the foggiest in getting to any action- sorry :-s

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)