English Amiga Board


Go Back   English Amiga Board > Support > support.Hardware > Hardware mods

 
 
Thread Tools
Old 13 July 2018, 07:50   #1
cheshirenoir
I miss my A1200

 
Join Date: Mar 2018
Location: Australia
Posts: 24
What the heck is this... thing?

Hey Folks,
So I have got an Amiga 1200T in a terible state, and I'm going through all the mods that have been added to this board. I'm hoping that the small board marked PC KB Rev3 is an AT Keyboard adapter, but there's one board that has me stumped.
It's marked superbonio A4kD_ATX, and it seems to be actually designed for an Amiga 4000 (From the markings)
It's got an ATX Power Input, 2 olde world AT power leads, a bunch of fan headers in 12, 7 and 5v, a flylead terminating in a socket clip that looks like it could clip over a CIA?
Other than that it has a couple of jumpers, some discrete components and 2 chips with the markings scratched off.

Anyone recognise what this thing is?
cheshirenoir is offline  
Old 13 July 2018, 08:25   #2
musashi5150
move.w #$4489,$dff07e
musashi5150's Avatar
 
Join Date: Sep 2005
Location: Norfolk, UK
Age: 38
Posts: 2,302
Looks to me like an ATX to AT PSU adapter with a flying socket for a reset switch. From memory I think they fit over the Gayle chip? As it's got AT PSU connectors, I'd assume it plugged into an A1200 zorro busboard of some kind.

Either that or, as you say, it converts A4000 PSU to AT... it is kinda odd.
musashi5150 is offline  
Old 13 July 2018, 08:26   #3
watman
Registered User

 
Join Date: Apr 2018
Location: Poland
Posts: 36
superbonio is a polish Amigan, I will ask him directly on polish forum, as it seems he's not under the same nickname here
watman is offline  
Old 13 July 2018, 17:37   #4
superbonio
Registered User

 
Join Date: Dec 2017
Location: WLKP
Posts: 1
The board you write about is a diversified ATX power interface to AT.&lt;br /&gt;<br />
As you wrote, it has two outputs for the fans, 2x12V, 2x9V and 2x5V&lt;br /&gt;<br />
The CIA chip overlay (U8 for A1200) (U300 for A4000D) is used for software amiga switching (AMI_ATX using _SEL2 signal), the 3pin connector on this overlay is used for Ratte AutoMonitorSwitch.&lt;br /&gt;<br />
In addition, jumpers on this board are used to select one of two modes of operation:&lt;br /&gt;<br />
1. The usual switching on and off of the ATX power supply, with a momentary switch.&lt;br /&gt;<br />
2. Software switching off the ATX power supply, switching on and off with momentary switch (when switching off, one must hold a few seconds and also wait a few seconds to switch on), additionally on the aminet there is a program (switchcontrol) which is responsible for turning off the power with this program.&lt;br /&gt;<br />
There are also 2 blank pins on the board, which in turn are short-circuited while the ATX power supply is turned on, and when it is turned off, something like a switch in AT computers, it is normally not used.&lt;br /&gt;<br />
And on this PCB there is also space for 3x 3.30V output, for example for direct power supply 060, CVPPC / BVPPC and Radeon 9250.
If you still have a problem with this tile then write.
superbonio is offline  
Old 14 July 2018, 06:51   #5
cheshirenoir
I miss my A1200

 
Join Date: Mar 2018
Location: Australia
Posts: 24
Quote:
Originally Posted by superbonio View Post
The board you write about is a diversified ATX power interface
Cool! Thank you so much! (I wasn't sure whether Superbonio was a brand or a name. This has certainly cleared up that )
I really appreciate all your help with this, and great to know you're still out there hacking away at hardware.

I'll put this to good use.
cheshirenoir is offline  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help my memory, how the heck do I get my shortcuts to stay on workbench? part12studios Amiga scene 5 10 June 2018 19:05
Does this thing have a name? Noctumus Retrogaming General Discussion 11 24 September 2016 22:22
What the heck is this game? Raid27 Amiga scene 12 26 October 2013 07:47
A little some thing from me for the amiga. freehand Retrogaming General Discussion 3 31 January 2011 03:00

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 02:54.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Page generated in 0.06544 seconds with 15 queries