Amiga 500 Burned

paulo_becas · 10 February 2010, 11:29

Has i said before, i'm recovering 2 Amiga 500(Motherboard rev 6A both) and an Amiga 1200 that my brother left to be killed by moister.
Well it started about a month and a half ago and yesterday one of the 500's burned a little bit

. I Guess it was the mold.
As you see in the picture i've desolder the problem from the board.

O guess this one was somehow conected the the mouse port because while i was working with him the mouse started to fail and a little after there was smoke everywhere.
Now i'm praying that it didn't damage anything else.
It made me very sad.

Now i'll just try to buy another one and soldered it back to place.
Just stop by to cry on the shoulder of this forum

pmc · 10 February 2010, 11:49

Hope there's no long term harm done and that you get it fixed.

paulo_becas · 10 February 2010, 14:37

I´ve just bought the replacement and now i'll solder it to the board

Let's pray for it to work.

10 February 2010, 17:34

paulo_becas : 47 Ohm / 0.5 Watt - ( R401 ). OK ?

narmi · 11 February 2010, 04:23

The Rev 6a schematics I have list R401 as a 4.7 ohm 1/2 watt part. Could someone with a 6a board can confirm? R401, R405, R406, and R408 are all the same in my schematic, so you could look at those too.

salax54 · 11 February 2010, 14:29

Pics are from revisions labeled. It's a 4.7 Ohm .5W
Hope this helps...

paulo_becas · 12 February 2010, 12:52

It's Rev6A A03, i've just soldered it back and it's working fine now, thank god

.

Thank's for the help

8bitbubsy · 12 February 2010, 14:46

Another Amiga healed!

10 February 2010, 11:29	#1
paulo_becas Registered User Join Date: Feb 2010 Location: Porto, Portugal Posts: 464	Amiga 500 Burned Has i said before, i'm recovering 2 Amiga 500(Motherboard rev 6A both) and an Amiga 1200 that my brother left to be killed by moister. Well it started about a month and a half ago and yesterday one of the 500's burned a little bit. I Guess it was the mold. As you see in the picture i've desolder the problem from the board. O guess this one was somehow conected the the mouse port because while i was working with him the mouse started to fail and a little after there was smoke everywhere. Now i'm praying that it didn't damage anything else. It made me very sad. Now i'll just try to buy another one and soldered it back to place. Just stop by to cry on the shoulder of this forum

11 February 2010, 14:29	#6
salax54 Registered User Join Date: Jun 2008 Location: Athens Greece Posts: 153	Pics are from revisions labeled. It's a 4.7 Ohm .5W Hope this helps... Attached Thumbnails

12 February 2010, 12:52	#7
paulo_becas Registered User Join Date: Feb 2010 Location: Porto, Portugal Posts: 464	It's Rev6A A03, i've just soldered it back and it's working fine now, thank god. Thank's for the help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Picasso II Burned Resistor	Brosol	support.Hardware	28	11 April 2021 00:30
Burned ISO. on Commodore CDTV	j_sntos	Amiga scene	7	09 March 2012 12:46
Compatibility with Amiga 500 and 500+ games	ErickDF	Amiga scene	2	23 May 2008 20:16
WTB: Amiga 600, 500, 500 +, 1200 (NTSC)	JeremyDay	MarketPlace	2	30 November 2006 03:27
Oops I burned something!	oldpx	support.Hardware	3	13 June 2004 01:45

10 February 2010, 11:49	#2
pmc gone Join Date: Apr 2007 Location: completely gone Posts: 1,596	Hope there's no long term harm done and that you get it fixed.

10 February 2010, 14:37	#3
paulo_becas Registered User Join Date: Feb 2010 Location: Porto, Portugal Posts: 464	I´ve just bought the replacement and now i'll solder it to the board Let's pray for it to work.

10 February 2010, 17:34	#4
EXA Posts: n/a	paulo_becas : 47 Ohm / 0.5 Watt - ( R401 ). OK ?

11 February 2010, 04:23	#5
narmi Guru Meditation Error Join Date: Jun 2007 Location: Vancouver, Canada Posts: 92	The Rev 6a schematics I have list R401 as a 4.7 ohm 1/2 watt part. Could someone with a 6a board can confirm? R401, R405, R406, and R408 are all the same in my schematic, so you could look at those too.

12 February 2010, 14:46	#8
8bitbubsy Registered User Join Date: Sep 2009 Location: Norway Posts: 1,711	Another Amiga healed!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)