WinUAE and HP ScanJet 6300C (SCSI)

I like to use my HP ScanJet 6300C with WinUAE. But WinUAE 1.0.0 using Nero ASPI doesn't recognize the scanner. WinUAE 0.8.27 use the Adaptec ASPI and recognize the scanner but doesn't gives the scanner an SCSI-ID at uaescsi.device.

How can I force WinUAE 1.0.0 not to use Nero ASPI and how can I force WinUAE to gives the Scanner an SCSI-ID?

Attached parts of the bootlogs.

8<-WinUAE 0.8.27-Adaptec wnaspi.dll Version 4.71.2.0-------------------

WinUAE 0.8.27 (OS: NT 5.0 Administrator privileges)
ASPI: open_driver 103 HostASPIStatus=0x1 HACount=0x3
ASPI: open_driver HostASPIStatus=0x1 HACount=0x3
ASPI: 0:0:0 'WDC WD16' '00JB-00GVC0 ' '08.0' [<0>,ATAPI]
ASPI: 1:0:0 'WDC WD80' '0LB-55DNA0 ' '77.0' [<0>,ATAPI]
ASPI: 1:1:0 'BENQ ' 'DVD DD DW1620 ' 'B7V9' [CDROM,ATAPI]
ASPI: 2:3:0 'TEAC ' 'CD-R58S ' '1.0P' [CDROM,SCSI]
ASPI: 2:6:0 'HP ' 'C7670A ' '3945' [<3>,SCSI]
support_scsi = 1 support_ioctl = 0
BENQ DVD DD DW1620 B7V9 = uaescsi.device:0
TEAC CD-R58S 1.0P = uaescsi.device:1
reset at 0

8<-WinUAE 1.0.0-Nero wnaspi32.dll Version 2.0.1.74---------------------

WinUAE 1.0.0 (NT 5.0 Service Pack 4 Admin) 32-bit x86 6.801 1
ASPI: driver location 'C:\Programme\Ahead\Nero\wnaspi32.dll'
ASPI: open_driver 103 HostASPIStatus=0x1 HACount=0x3
ASPI: open_driver HostASPIStatus=0x1 HACount=0x3
ASPI: SCSI scan starting..
ASPI: 0:0:0 'WDC WD16' '00JB-00GVC0 ' '08.0' [<0>,ATAPI]
ASPI: 1:0:0 'WDC WD80' '0LB-55DNA0 ' '77.0' [<0>,ATAPI]
ASPI: 1:1:0 'BENQ ' 'DVD DD DW1620 ' 'B7V9' [CDROM,ATAPI]
ASPI: 2:3:0 'TEAC ' 'CD-R58S ' '1.0P' [CDROM,SCSI]
ASPI: SCSI scan ended
support_scsi = 1 support_ioctl = 0
BENQ DVD DD DW1620 B7V9 = uaescsi.device:0
TEAC CD-R58S 1.0P = uaescsi.device:1
reset at 0

8<-------------------------------------------------------------------

[Toni Wilen]

You need to use "-noaspifiltering" -command line parameter to enable non-cdrom scsi devices.

Hmm, it seems nero aspi only supports CDROMs and harddrives. And I thought Adaptec's ASPI is not ever again needed