English Amiga Board


Go Back   English Amiga Board > Support > support.Hardware

 
 
Thread Tools
Old 24 September 2013, 01:17   #1
vstech
 
Posts: n/a
problems getting the FD working

on my amiga 3000

I've got to access my discs for a CNC machine I'm using, and the drive will NOT function.
I've installed chinon FZ357 with the pads soldered, no go.
I pulled some drives from my a2000 sorta worked... but no go.
are there any diagnostics I can do to fix the drive? motherboard problems?
I get the df0?? icon, I select it, and format it... sometimes it formats all 79, sometimes not.
but even when it does, I get disk errors etc. I'm beginning to suspect the main board itself. there is corrosion around the ANCIENT battery... could that be causing DF0 errors?

Last edited by vstech; 24 September 2013 at 21:05.
 
AdSense AdSense  
Old 24 September 2013, 17:48   #2
vstech
 
Posts: n/a
sorry, it's an amiga 3000 I'm having issues with.

I have two to try to get working. neither one will work. I cannot access the diskettes.
I pulled the battery off the tray, reseated all the chips, cleaned the corrosion off the board, and reseated everything.
HD boots WB2.0 I get to the workbench, but I cannot access the disks. they will mount to the wb, they will open sometimes, sometimes not.
I've tried new disks, no go. new drives no go... is there a specific chip on the board I should focus on? where is the FD controller? what makes this machine work?
 
Old 25 September 2013, 08:12   #3
ajk
Registered User
ajk's Avatar
 
Join Date: May 2010
Location: Helsinki, Finland
Posts: 1,084
The floppy drive controller is on the Paula chip (which also handles audio and serial port). On the A3000 the battery is right next to the Paula, I think, so the leakage might well cause issues with the floppy drive. Perhaps there is already some damage that requires more than just cleaning up?

If you just need to access these particular floppies, it may be easier to just use another Amiga. Did you say you also have an A2000?
ajk is offline  
Old 27 September 2013, 20:48   #4
vstech
 
Posts: n/a
yes, but it will not boot at all... SERIOUS battery leakage on that one...

I'll pull paula and clean each pin... hopefully it'll work.
 
Old 27 September 2013, 21:49   #5
vstech
 
Posts: n/a
no change with paula clean. there was no corrosion on it either.
there was a little on the resistors nearby, I cleaned and resoldered the pins... no change.
I also pulled denise because it was closest to the battery, but no corrosion on it either...
 
AdSense AdSense  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
External Disk Drive working and not working fc.studio support.Hardware 12 10 August 2009 03:04
Personal project: EEEPC, Gamebase and WINAUE: problems problems butter100fly project.MAGE 15 09 August 2009 10:51
New Plus/4 - Not working... DDNI support.Hardware 12 19 June 2009 18:37
floppy df0 working / not working Dave_wb support.Hardware 3 07 January 2009 09:11
GUI refresh problems + OpenGL Speed Problems in 0.821r4 Danny Bacon support.WinUAE 1 07 June 2002 18:57

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 01:21.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Page generated in 0.05882 seconds with 15 queries