08 April 2011, 02:51 | #1 |
Registered User
Join Date: Mar 2009
Location: texas,usa
Posts: 235
|
Apower desktop PSU for A500/600/1200/cd32 are Back!
Hey all,
hope u don't mind me posting this here,since so many people are so site specific these days.If its some violation maybe the mods can remove it for me. anyway, I have been toiling away and searching the world for connectors and have managed to finish building and testing 51 new heavy duty power supplies for the A500/600/1200 and cd32! I have them listed with different color labels(they are all the same psu,just a choice of label colors). I have managed to setup a shopping cart to automate this. PLEASE make sure your PAYPAL account is verified/confirmed before ordering,failure to do so will delay your order and cause me major headaches! - thanks! http://eab.abime.net/attachment.php?...1&d=1302223679 Here are the specs: ------------------ Much smaller than the original. Works on any voltage from any country 100vac to 240vac. 50 or 60hz Much more powerful than the original power supply (7AMPS on +5v,1.5Amps on +12v,and .3Amps on -12v). Uses a standard IEC power cord from any printer or computer(ships with USA cord only). Completely quiet and no fans. Lighted power switch - know when its on or off,unlike the original! Overload Protected - Auto reset when overload is cleared up Short Protected - Goes into a pulse mode until the short is fixed.Auto reset when short is fixed. These are intended for desktop machines only, NOT towered machines with zorro/pci expansions!<p> http://eab.abime.net/attachment.php?...1&d=1302223699 The second surprise is i have secured a boatload of brand new 3.5" scsi 5-slot card readers!.so what you say? Well these are great for adding compact flash,sdhc,smartmedia,or to your amiga with scsi to use as a hard drive,or even using all 5 slots filled with different cards(a different os on each? mac/pctask partitions?hmm). i have tested them in the A590,gvp A530,HCII+8,on old trumpcards,warpengine,gvp A2000 cards/accelerators,ivs vector,fastlane z3,A4000t scsi,A3000t scsi.these also work on some atari and apple and sampler scsi! they have the latest firmwares and you can hook them right to your 50 pin scsi without any adapters.The bolt anywhere a floppy drive will in most cases.can be put internal in place of the hard drive.all 5 slots fall under 1 SCSI ID with luns..i also have some scsi cables and assorted stuff there,when its gone its gone. I have set up a online shopping cart with SSL to avoid EBAY this time and the crazy fee's. this also automates the shipping etc and saves me alot of headaches.The price for the power supplies is $42+ shipping(sorry,after the first batch,i tallied the stuff up and made almost nothing after fee's!). Actual shipping is calculated on the shopping cart.Shipping to most of europe/uk etc is around $14 via USPS flatrate small BOX. USA shipping is also calculated.Payment is by PAYPAL only and the cart passes you off to the secure paypal site. Please understand,i can't control customs and such,but i can guarantee you i shipped the stuff the next morning after you order it! Oh,you can find these power supplies at http://www.a4000t.com or https://a4000t.com/store they both go to the same place if anyone has any questions,please feel free to ask. Mech |
08 April 2011, 17:12 | #2 |
Registered User
Join Date: Mar 2009
Location: texas,usa
Posts: 235
|
Just a note to all those who have ordered a power supply or other items,they have been shipped out today.
thanks, Mech |
08 April 2011, 19:07 | #3 |
Old-Amiga-Git
Join Date: Feb 2011
Location: Somerset , in the UK
Posts: 175
|
Nice item...
Would l love to know where you managed to find the Amiga Power plugs ?? C. |
08 April 2011, 20:40 | #4 |
Registered User
Join Date: Nov 2009
Location: Livorno, Italy
Posts: 398
|
Hi Mech, I'm Francesco
Your SCSI reader works great, as you know I'm using it in my CDTV |
08 April 2011, 21:10 | #5 | |
Registered User
Join Date: Mar 2009
Location: texas,usa
Posts: 235
|
Chinese ancient secret(hehe). i expect to have some leftover to sell when my power supplies are all sold,so stay tuned.
Mike Quote:
are the controllers and or a copy of them still available??, i would like to do it with my cdtv also. mech Last edited by TCD; 08 April 2011 at 21:21. Reason: Back to back posts merged. Use multi-quote. |
|
08 April 2011, 23:56 | #6 |
Registered User
Join Date: Nov 2005
Location: Sweden
Posts: 749
|
Dumb question perhaps, but whats the deal with the labels? Gold, silver, white? Whats the difference? I'm thinking about grabbing one, after i had a chance at checking out my wattage draw on the current one.
B! |
09 April 2011, 05:44 | #7 |
Registered User
Join Date: Mar 2009
Location: texas,usa
Posts: 235
|
There is absolutely no difference in power,i just printed 3 different labels to give everyone a choice of colors.
|
09 April 2011, 11:20 | #8 |
Registered User
Join Date: Nov 2005
Location: Sweden
Posts: 749
|
Probably the last response i expected. Fair enough. I'll probably grab one at random if it turns out i'm anywhere near the 25w that the original PSU delivers. Might grab one anyway, just to make sure.
Thanks for the info. B! |
09 April 2011, 11:36 | #9 |
Professional slacker!
|
Hi Mech,
Superb products I'm tempted to buy one of each once funds allow My A4000's would love the SCSI Card Readers thats for sure! Steve. |
09 April 2011, 11:42 | #10 |
Registered User
Join Date: Feb 2007
Location: Melbourne, Australia
Age: 41
Posts: 3,772
|
|
09 April 2011, 13:04 | #11 | |
Registered User
Join Date: Nov 2009
Location: Livorno, Italy
Posts: 398
|
Quote:
I buyed mine from Amigadigital some months ago, but i sold out all of them. Now he retired himself from Amiga scene (hoping temporally) for problems in the real life |
|
09 April 2011, 14:46 | #12 |
Registered User
Join Date: Mar 2009
Location: texas,usa
Posts: 235
|
sorry to hear that,i was hoping to get my cdtv fixed up like yours.
|
10 April 2011, 11:56 | #13 |
Old-Amiga-Git
Join Date: Feb 2011
Location: Somerset , in the UK
Posts: 175
|
[quote=mech;748562]Chinese ancient secret(hehe). i expect to have some leftover to sell when my power supplies are all sold,so stay tuned.
Mike Aha !! would have suspected that !! .. Not much they don't do ? Chris |
10 April 2011, 22:12 | #14 |
Registered User
Join Date: Apr 2011
Location: Athens / Greece
Posts: 33
|
Is this suitable for a standard A500 or A1200 as a simple replacement of the 20 year old PSU ? I'm confused with all these desktop and towered systems. I have standard Commodore Amigas!
|
10 April 2011, 23:29 | #15 |
Registered User
Join Date: Mar 2009
Location: texas,usa
Posts: 235
|
Yes,they are intended for any 500/600/1200. "desktop" just means it's in the original amiga case and not towered with pci or zorro expansions.
|
22 April 2011, 02:13 | #16 |
Pastafarian
Join Date: Sep 2010
Location: Uppsala/Sweden
Posts: 290
|
just ordered one powerbrick, and i was really tempted to buy two. I think its so cool that parts are made even in 2011 for our classics.
|
22 April 2011, 18:21 | #17 |
Bawbag.
Join Date: Mar 2008
Location: Chicago, USA
Posts: 375
|
Received my PSU from Mechy on Monday. Tried it on my A600 a couple of nights ago. Works like a charm. A600 has ACA630 and A603 installed.
Thanks Mechy! |
22 April 2011, 20:44 | #18 | |
Registered User
Join Date: Mar 2009
Location: texas,usa
Posts: 235
|
Quote:
I just sent another batch out this morning,so those that ordered should be receiving them soon. i wish i had a ACA630 for my machine. Mech |
|
26 April 2011, 08:25 | #19 |
Registered User
Join Date: Apr 2011
Location: Athens / Greece
Posts: 33
|
I have received mine a few minutes ago. This is so small and nice!
|
28 April 2011, 14:13 | #20 |
Registered User
Join Date: Feb 2011
Location: France
Posts: 40
|
Just ordered a white label !
Last edited by Philyon; 29 April 2011 at 09:44. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Amiga 1200 / 600 Desktop Rubber Feet x4 | amigakit.com | MarketPlace | 4 | 01 March 2012 17:58 |
Can an A500 or 600 PSU power an A590? | Merlin | Hardware mods | 19 | 23 September 2008 10:36 |
A500/600/1200 Ice cream PSU (Lighter version) | Paul_s | MarketPlace | 0 | 26 October 2007 20:03 |
Amiga1200 Desktop PSU = 25WATT... | BarrySWE | support.Hardware | 11 | 27 November 2005 15:28 |
CD32/A500 psu | Unregistered | support.Hardware | 8 | 17 July 2002 22:07 |
|
|