16 May 2015, 10:19 | #1 |
Registered User
Join Date: Feb 2015
Location: heywood, UK
Posts: 29
|
pc task 4.4:)
I know this is complete madness , But I've installed pc task 4.4 on winuae just to mess with , I've got a sd card , I'm using as an Amiga drive,partitioned it in Amiga os 3.5, ran PC Task, and formatted one partition as PC partition.
So in theory be able to copy files over to it from Win7, but I think I've missed something. I thought if its formatted as a PC partition in PC task then win7 should see it as a accessible partition or is there more to it . Or if someone knows how to access PC Task Partitions from Amiga dos, only I can't get crossmount to work, it says its mounted them but they don't show up!. cheers |
16 May 2015, 11:30 | #2 |
A1260T/PPC/BV/SCSI/NET
Join Date: Jan 2013
Location: Moscow / Russia
Posts: 840
|
Should be easier to make an msdos disk under windows and then mount it on the amiga side. The other way round is more difficult since windows might require something to get it mounted.
|
18 May 2015, 10:41 | #3 |
Registered User
Join Date: Jun 2009
Location: Dublin, then Glasgow
Posts: 6,343
|
Back in the day, on a real Amiga, I used to mount the MS-DOS partition on the Amiga side using a mount file in Devs/DOSDrivers. I based it on a CrossDOS file, took the values required from HDToolbox's entries and used Fat95 as the filesystem and 1230scsi.device as the device. Worked perfectly for accessing files from both sides. Be very careful doing this though as the wrong values has the potential to corrupt other partitions!
If you need it I can probably fire up the old machine and see if I still have the mount file. Edit: As for why Windows 7 can't see the partition, the Amiga hard drive is set up using the Amiga's RDB partitioning scheme which Windows can't understand. It could probably read the partition itself fine, but it doesn't know where to look. |
18 May 2015, 17:49 | #4 |
Registered User
Join Date: Feb 2015
Location: heywood, UK
Posts: 29
|
re
Thanks for both your answers, I gave up and finally got the cd rom to work , so made a dvd iso image of all the files, then setup the config.sys and autoexec.com for dvd, hey presto easy access to the dos games I fancied trying out on it
|
18 May 2015, 18:15 | #5 |
WinUAE end user
Join Date: Jan 2014
Location: Bremen
Age: 44
Posts: 649
|
I'm also using a mount file in Devs/DOSDrivers. But a hardfile instead of a real disk.
I have some mountfiles created using crossmount and they work fine. The mountfile should look like this: Code:
/* Mountfile Entry Created: 02-May-;14 15:15:53 * for a File as a CrossDOS Disk. * * Disk Size: 80.0 Meg * Vendor and drive name: */ /* Disk size parameters.*/ Surfaces = 1 BlocksPerTrack = 1 Lowcyl = 0 Highcyl = 163840 BufMemType = 0 Blocksize = 512 /* Device driver parameters.*/ Device = filedisk.device Unit = "System:Emulators/IBM-PC/PC-Task4/hardfile0" Flags = 0x00000000 /* File system parameters.*/ Mask = 0xFFFFFFFE Maxtransfer = 0xFFFFFFFF Reserved = 2 Filesystem = L:CrossDOSFileSystem Stacksize = 2000 Priority = 5 Bootpri = -20 Globvec = -1 Buffers = 5 Dostype = 0x4d534800 Mount = 1 # Now I created a blank file named hardfile0 in sys:Emulators/IBM-PC/PC-Task4. I did setup hardfile0 as harddisk C: in PCTask and used a floppy image of DOS version 6.2 or so to format the (virtual)disk. (I think I needed crossdos on the Amig side but it was looong ago) After reboot the Filedisk ws also visible from the Workbench. I think it works similar with a real disk. But I see no reason why to use one. The filedisk is still faster than any real Amiga harddisk ever was thanks to UAE. EDIT: Found the image on my drive.Just hacked the name into google and the DL site came up. http://www.allbootdisks.com/download/dos.html I like the web. It was very helpful. Last edited by Michael Sykes; 18 May 2015 at 18:21. |
25 October 2016, 22:01 | #6 |
Guru Meditating
Join Date: Jun 2014
Location: England
Posts: 2,339
|
Has anyone had any luck creating a large hardfile in pctask4.4? I've used it to create a 100mb one. I've then mounted hardfile0 and hardfile1 using pctcrossmount. Hardfile0 becomes accessible in workbench as tcc: but I can't access tdc: at all. I can't format it (I get an error 254 from the format command) and I can't format the drive in msdos from Pctask.
Any ideas what the problem might be? Failing that, could someone kindly email me a blank large working hardfile? |
28 July 2023, 16:13 | #7 |
A1200 040 SAM440EP 667
Join Date: Jan 2008
Location: Lisbon / Portugal
Posts: 873
|
Does anyone know how to hook a virtual cd-rom to pctask 4.4?
I tried with isomount and a cd of win95 but it doesn´t was recognized. Isomount creates a virtual drive with win95.iso inside named SCD0: and PC-Task associate it to D: and all goes well. But the win95 boot floppy has 4 cd drivers and none of it recognize the drive. Any tips about? |
28 July 2023, 16:44 | #8 |
Registered User
Join Date: May 2020
Location: Figueira da Foz
Posts: 361
|
The archive is aminet is lacking some files it seems, I would like to mount hardfile0 since using diskimages is unbearable slow, any hint?
|
28 July 2023, 17:18 | #9 |
A1200 040 SAM440EP 667
Join Date: Jan 2008
Location: Lisbon / Portugal
Posts: 873
|
|
28 July 2023, 17:24 | #10 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,862
|
Check the zone for the missing piece..
|
28 July 2023, 17:36 | #11 |
A1200 040 SAM440EP 667
Join Date: Jan 2008
Location: Lisbon / Portugal
Posts: 873
|
Thanks Jope
|
29 July 2023, 16:58 | #12 |
A1200 040 SAM440EP 667
Join Date: Jan 2008
Location: Lisbon / Portugal
Posts: 873
|
Hello, I'm trying to install win95 to my PC-Task c:\ partition but it quits with a screen error: Fatal error opening or using the screen
I already tried a varied number of different resolutions and colors in VGA and SVGA of both Dynamic and Interpretative modes but it still giving the same error. Does anyone know how to fix it? Or there are on the net any hardfiles with win95 already installed? Thanks in advance |
07 August 2023, 20:17 | #13 |
A1200 040 SAM440EP 667
Join Date: Jan 2008
Location: Lisbon / Portugal
Posts: 873
|
Any idea on how to map a virtual cd from amiga in PC-Task?
|
07 August 2023, 21:21 | #14 |
Registered User
Join Date: Nov 2014
Location: Italy
Posts: 2,365
|
you have install mscdex.exe, a cdrom.sys that mount your cdrom amiga side (real or emulated)
|
07 August 2023, 22:13 | #15 |
A1200 040 SAM440EP 667
Join Date: Jan 2008
Location: Lisbon / Portugal
Posts: 873
|
I already have mscdex.exe and 4 cdrom drivers, including the OAKCDROM.SYS (a geral ide cdrom driver), and tested with a virtual iso cd mounted through isomount and also through iso image mounted through Amiberry menu cd option but it keeps with the error mscd001 driver not find.
I think the problem is that a virtual cd is not IDE nor SCSI |
08 August 2023, 11:57 | #16 |
Registered User
Join Date: Nov 2014
Location: Italy
Posts: 2,365
|
i not remember how to set PC-Task, but i'm sure that in the past, with my real A1200 with 68040 i have installed "Star Trek Final Unity" via CD-ROM.
I think that PC-TAsk 4.4 should be have PCTCDrom.sys that working and it is included in PC-Task try to use this device with mscdex autoexec.bat: Code:
mscdex/D:MSCD001 Code:
device=PCTCDROM.sys/D:(your amiga device),(unit) Last edited by Seiya; 08 August 2023 at 12:45. |
08 August 2023, 12:34 | #17 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,862
|
Mm yes, definitely use pctcdrom.sys, not any of the ATAPI drivers.
|
08 August 2023, 14:12 | #18 |
Registered User
Join Date: Mar 2004
Location: finland
Posts: 1,838
|
Worked for me, installed Win95 (with 060) several times as every crash did make it non bootable. Was no use but kind of entertainment. Slow as hell, you could see it write the icons, borders etc. Boot time was 2.5 - 4 minutes
|
08 August 2023, 15:03 | #19 | |
A1200 040 SAM440EP 667
Join Date: Jan 2008
Location: Lisbon / Portugal
Posts: 873
|
Quote:
Thanks for the advice Seiya, I will try PCTCDrom.sys Last edited by AlfaRomeo; 08 August 2023 at 15:18. |
|
08 August 2023, 15:16 | #20 | |
A1200 040 SAM440EP 667
Join Date: Jan 2008
Location: Lisbon / Portugal
Posts: 873
|
Quote:
I already installed Win 3 on a 040 but it was unuseful so now I want to try win95 on a real A1200 with piStorm and on a RaspberryPi4 with Amiberry too. Tried install win95 through floppys but it gives me a screen error so want to try other versions of win95 in cd and see if can install it. |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PC Task 4.4 | Jimbo | request.Apps | 61 | 25 February 2023 05:56 |
Once again PC Task! | lurkist | request.Apps | 58 | 04 July 2022 23:16 |
PC-Task is now free! | gulliver | Amiga scene | 58 | 26 April 2021 16:51 |
PC-Task | DyLucke | request.Apps | 18 | 06 February 2010 21:52 |
PC Task Request | Solid Snake | request.Apps | 1 | 31 March 2006 11:07 |
|
|