A4000T fast ram help.

Lynk · 24 May 2015, 08:43

Hi guys. Having a problem with my AT 4000T. I have an apollo 3060 with 060 at 50mhz with 64 meg of ram and a picasso iv installed.

The amiga recognises the 64mb ram on the accelerator card but no recognising the ram on the motherboard.

Another thing is my amiga for some reason is only seeing the cpu as an 040 not 060 for some reason.

Any help would be appreciated.

Cheers,
Marc

jack-3d · 24 May 2015, 10:21

What tool do you use to check your config? I would suggest you to use latest Whichamiga (https://www.sintonen.fi/sw/WhichAmiga_beta.lha). Maybe stupid question, but do you use Apollo 060 libraries? My A4000T is on recap now and I have Apollo 3060 too so next month I will be able to test compatibility of both.

Lynk · 24 May 2015, 12:04

Yeah mate i did install the 060 libraries. I can't remember the name of the program i used. I shall try which amiga and see what it says.

Matt_H · 24 May 2015, 19:14

A lot of the older system analysis utilities (vintage SysInfo, ShowConfig, etc.) will report an 060 as an 040. Nothing to worry about, it's normal. It's because the 060 didn't exist at the time those tools were written!

24 May 2015, 08:43	#1
Lynk Junior Member Join Date: Aug 2002 Location: Perth, Western Australia Posts: 133	A4000T fast ram help. Hi guys. Having a problem with my AT 4000T. I have an apollo 3060 with 060 at 50mhz with 64 meg of ram and a picasso iv installed. The amiga recognises the 64mb ram on the accelerator card but no recognising the ram on the motherboard. Another thing is my amiga for some reason is only seeing the cpu as an 040 not 060 for some reason. Any help would be appreciated. Cheers, Marc

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A600 multi-upgrade (Chip RAM + Fast RAM + ROM + IDE2CF)	Astrofra	Hardware pics	15	18 February 2014 21:27
32-bit Fast RAM slower than 24-bit Fast on certain A1200 config	moshy	support.WinUAE	1	24 May 2013 21:55
Use of 4MB PCMCIA Fast Flash Memory as Fast RAM in A1200	nkarytia	support.Hardware	10	16 September 2011 13:37
[SAS/C] Making malloc() allocate in fast RAM instead of chip RAM?	8bitbubsy	Coders. General	3	07 August 2011 07:06
32-bit FAST RAM vs. ZII FAST RAM	polbit	support.Hardware	16	28 January 2007 20:16

24 May 2015, 10:21	#2
jack-3d kLiker Join Date: Mar 2011 Location: Brno / Czech Republic Posts: 371	What tool do you use to check your config? I would suggest you to use latest Whichamiga (https://www.sintonen.fi/sw/WhichAmiga_beta.lha). Maybe stupid question, but do you use Apollo 060 libraries? My A4000T is on recap now and I have Apollo 3060 too so next month I will be able to test compatibility of both.

24 May 2015, 12:04	#3
Lynk Junior Member Join Date: Aug 2002 Location: Perth, Western Australia Posts: 133	Yeah mate i did install the 060 libraries. I can't remember the name of the program i used. I shall try which amiga and see what it says.

24 May 2015, 19:14	#4
Matt_H Registered User Join Date: Jul 2008 Location: Boston, MA Posts: 943	A lot of the older system analysis utilities (vintage SysInfo, ShowConfig, etc.) will report an 060 as an 040. Nothing to worry about, it's normal. It's because the 060 didn't exist at the time those tools were written!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)