Kickstart Editor (Windows GUI, DOS/Linux/MacOS CLI)

[ScottC2010]

Originally Posted by Mikeywikey

I added the 2.35 CDTVLand extended ROM definitions, I definitely have 2.30 and 2.7, maybe 2.0 (can’t remember!) but not 1.0 or the flash betas. Don’t think I did FMV either.

Off the top of my head I can’t remember what the difference was between the A570/A690 and CDTV, mainly no floppy boot? I have a CDTV but I’m not an expert (I’m reverse engineering the CD interface to implement as FPGA, but haven’t touched it for a couple of years).

I have CDTV and difference between the 1.0/2.7(Or sometimes known as 2.07) is the module Kludges - so if you use the 2.30 (Which are for the A570) in a CDTV with a lot of memory like mine say 8BM Fast, only 6MB will be shown (As well as the screen going red if no floppy attached)

There are patched 2.30 ones for CDTV but only for the floppy screen and they will still lose memory

[admiral]

Got Capitoline up and working, with my old Amiga's rom dumps, some blobs from Remus, and some Hyperion roms and ADFs.

I notice that most RATs for 1MB ROMs fail to build, with these errors:

add 0xad35cdaa
ERROR: Unable to open file 0xad35cdaa
add 0x0cd1bd9c
ERROR: Unable to open file 0x0cd1bd9c

These module CRC32s aren't in "Capitoline Hashes", and thus I only know the CRC32 and not the filename.

What are these modules? Where can I find them?

[admiral]

Originally Posted by admiral

Got Capitoline up and working, with my old Amiga's rom dumps, some blobs from Remus, and some Hyperion roms and ADFs.

I notice that most RATs for 1MB ROMs fail to build, with these errors:

add 0xad35cdaa
ERROR: Unable to open file 0xad35cdaa
add 0x0cd1bd9c
ERROR: Unable to open file 0x0cd1bd9c

These module CRC32s aren't in "Capitoline Hashes", and thus I only know the CRC32 and not the filename.

What are these modules? Where can I find them?

From another discussion, they are 'compactflash.device' and 'fat95' respectively.

But I still do not know where they come from, and thus can't complete the RATs.

[admiral]

Originally Posted by admiral

From another discussion, they are 'compactflash.device' and 'fat95' respectively.

But I still do not know where they come from, and thus can't complete the RATs.

From another discussion:

https://aminet.net/package/driver/media/CFD133

https://aminet.net/package/disk/misc/fat95

I was then able to build the RATs.

It'd be good on the Capitoline end to have descriptions for the hashes and/or to add comments to the RATs that use them.

[Mikeywikey]

Originally Posted by admiral

From another discussion:

https://aminet.net/package/driver/media/CFD133

https://aminet.net/package/disk/misc/fat95

I was then able to build the RATs.

It'd be good on the Capitoline end to have descriptions for the hashes and/or to add comments to the RATs that use them.

I’ll definitely do that, it was originally just for my testing, but it would definitely help people understand how they work.
Thanks for the feedback.

[Mikeywikey]

Originally Posted by admiral

From another discussion:

https://aminet.net/package/driver/media/CFD133

https://aminet.net/package/disk/misc/fat95

I was then able to build the RATs.

It'd be good on the Capitoline end to have descriptions for the hashes and/or to add comments to the RATs that use them.

New version on the Website, v1.06 various bugfixes and visual changes, also documented all the tests now… thanks for the suggestion.

[admiral]

Originally Posted by Mikeywikey

New version on the Website, v1.06 various bugfixes and visual changes, also documented all the tests now… thanks for the suggestion.