Program for MapRom to FastRam On Winuae

Zilog · 12 September 2019, 13:28

Hi to all,
with Winaue and with without expansions card acceleteror, directly with 68030,68040 or 68060 cpu, how program is correct use for MapRom to FastRam?

Always Blizkick?
I think,if i understand correctly,there is a proprom too MMulib named MuMove4k...?

Thanks for help.
By.

Toni Wilen · 13 September 2019, 12:13

Why? Unless you are trying something weird or testing or developing or trying to match some existing real hardware config, there is no need. In non-CE odes ROM is as fast as RAM, you won't gain any speed. (and you actually lose lots of speed if you use maprom that requires MMU)

Zilog · 14 September 2019, 12:39

Quote:

Originally Posted by Toni Wilen

Why? Unless you are trying something weird or testing or developing or trying to match some existing real hardware config, there is no need. In non-CE odes ROM is as fast as RAM, you won't gain any speed. (and you actually lose lots of speed if you use maprom that requires MMU)

I Toni!!!
I konw than in winaue, rom, chip, fast , not change nothing,but.....
...You are write the most powerfull, complete , emulator....in all hystory of
computer technology for Amiga

, with all expansion feacture!

So...for want of the past, passion, in this moment i emulate real A1200, with Phase5 Blizzard 1230 III and mmu active, and i stay recreate the real ambient of past.

I know, as I said in the past, I'm not all normal!

Very Very Thansk for your great work Toni!!!

Toni Wilen · 14 September 2019, 14:30

Ok, experimenting also counts

Blizzard 1230 MK III maprom is emulated. If maprom "jumper" is set (in expansion panel), board ROM does the maprom copy automatically. It is completely transparent.

You can also use BlizKick (1230 MK 3 is supported) normally.

MMU is not needed.

Zilog · 14 September 2019, 14:33

Quote:

Originally Posted by Toni Wilen

Ok, experimenting also counts

Blizzard 1230 MK III maprom is emulated. If maprom "jumper" is set (in expansion panel), board ROM does the maprom copy automatically. It is completely transparent.

You can also use BlizKick (1230 MK 3 is supported) normally.

MMU is not needed.

Thanks!

12 September 2019, 13:28	#1
Zilog Registered User Join Date: May 2014 Location: Italy Posts: 419	Program for MapRom to FastRam On Winuae Hi to all, with Winaue and with without expansions card acceleteror, directly with 68030,68040 or 68060 cpu, how program is correct use for MapRom to FastRam? Always Blizkick? I think,if i understand correctly,there is a proprom too MMulib named MuMove4k...? Thanks for help. By.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WinUAE: Problem MapRom Emulation	AMIGASYSTEM	support.WinUAE	9	26 January 2019 12:34
WinUAE,AMOS & Fastram	volvo_0ne	Coders. AMOS	1	13 March 2018 23:38
Can an amiga program close WinUAE?	xxxxx	support.WinUAE	3	06 August 2014 06:21
External windows program communicating with program running inside WinUAE	xxxxx	support.WinUAE	10	19 February 2013 09:27
A600 4mb Fastram + A1200 Mb Fastram	mikele	MarketPlace	7	07 May 2012 19:28

13 September 2019, 12:13	#2
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,505	Why? Unless you are trying something weird or testing or developing or trying to match some existing real hardware config, there is no need. In non-CE odes ROM is as fast as RAM, you won't gain any speed. (and you actually lose lots of speed if you use maprom that requires MMU)

14 September 2019, 14:30	#4
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,505	Ok, experimenting also counts Blizzard 1230 MK III maprom is emulated. If maprom "jumper" is set (in expansion panel), board ROM does the maprom copy automatically. It is completely transparent. You can also use BlizKick (1230 MK 3 is supported) normally. MMU is not needed.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)