17 December 2008, 10:37 | #1 |
Registered User
Join Date: Aug 2008
Location: Spain
Posts: 527
|
Configure USB joystic in e-uae (OSX & Linux)
I am trying to setup an usable emulation enviroment with e-uae on mac/linux, but (among other problems) my usb-attached ps2 joystick doesn't work properly: only one button is recognized, but directional pad is not.
I see the relevant part in uaerc is: joyport0=mouse joyport1=joy0 input.config=0 input.1.keyboard.0.button.17=JOY1_UP input.1.keyboard.0.button.11=JOY1_DOWN input.1.keyboard.0.button.3=JOY1_LEFT input.1.keyboard.0.button.4=JOY1_RIGHT input.1.keyboard.0.button.58=JOY1_FIRE_BUTTON input.1.keyboard.0.button.126=JOY2_UP input.1.keyboard.0.button.125=JOY2_DOWN input.1.keyboard.0.button.123=JOY2_LEFT input.1.keyboard.0.button.124=JOY2_RIGHT input.1.keyboard.0.button.59=JOY2_FIRE_BUTTON input.2.keyboard.0.button.17=JOY1_UP input.2.keyboard.0.button.11=JOY1_DOWN input.2.keyboard.0.button.3=JOY1_LEFT input.2.keyboard.0.button.4=JOY1_RIGHT input.2.keyboard.0.button.58=JOY1_FIRE_BUTTON input.2.keyboard.0.button.126=JOY2_UP input.2.keyboard.0.button.125=JOY2_DOWN input.2.keyboard.0.button.123=JOY2_LEFT input.2.keyboard.0.button.124=JOY2_RIGHT input.2.keyboard.0.button.62=JOY2_FIRE_BUTTON input.3.keyboard.0.button.17=JOY1_UP input.3.keyboard.0.button.11=JOY1_DOWN input.3.keyboard.0.button.3=JOY1_LEFT input.3.keyboard.0.button.4=JOY1_RIGHT input.3.keyboard.0.button.58=JOY1_FIRE_BUTTON input.3.keyboard.0.button.126=JOY2_UP input.3.keyboard.0.button.125=JOY2_DOWN input.3.keyboard.0.button.123=JOY2_LEFT input.3.keyboard.0.button.124=JOY2_RIGHT input.3.keyboard.0.button.62=JOY2_FIRE_BUTTON input.4.keyboard.0.button.17=JOY1_UP input.4.keyboard.0.button.11=JOY1_DOWN input.4.keyboard.0.button.3=JOY1_LEFT input.4.keyboard.0.button.4=JOY1_RIGHT input.4.keyboard.0.button.58=JOY1_FIRE_BUTTON input.4.keyboard.0.button.126=JOY2_UP input.4.keyboard.0.button.125=JOY2_DOWN input.4.keyboard.0.button.123=JOY2_LEFT input.4.keyboard.0.button.124=JOY2_RIGHT input.4.keyboard.0.button.62=JOY2_FIRE_BUTTON sdl.map_raw_keys=false So I was wondering how can I remap what JOY1_UP, JOY1_DOWN, JOY1_LEFT and JOY1_RIGHT is, so I can use this nice pad. HI-TORO totally lacks button configuration, and this input config is...strange, to say the least. This pad works without problems with other emulators, souch as Magic Engine or Snes9X. Any ideas? |
18 December 2008, 15:03 | #2 |
Registered User
Join Date: Jun 2008
Location: planet earth
Posts: 1,115
|
not really a clue about these configs. but in the given example above, try changing: "input.config=0" into "input.config=1". the lines you have listed, seems for configuration 1-4 but not "0". well, i might be wrong here.
|
18 December 2008, 15:11 | #3 |
HOL/FTP busy bee
Join Date: Sep 2006
Location: Germany
Age: 46
Posts: 31,525
|
You're right hit 'input.config=0' means that the compatibility mode is used. However I don't know which config lines you need to assign the directional pad and more firebuttons
|
19 December 2008, 10:03 | #4 |
Registered User
Join Date: Aug 2008
Location: Spain
Posts: 527
|
leaving e-uae. It's just too far from perfection for what I expect for an Amiga emulator: no one cares to improve it's graphical output, control configs, etc...
back to winUAE. Thanks for all your response, guys! |
19 December 2008, 22:05 | #5 |
Registered User
Join Date: Jun 2008
Location: planet earth
Posts: 1,115
|
same here, the gui looks poorly and not that much options compared to winuae.
can you say something about the "'input.config=0'" issue? does the 0 -> 1 "trick" works? |
22 September 2009, 21:11 | #6 |
Posts: n/a
|
Hi everyone, I'm new here
I've searched google and I've searched these forums. I am trying to set up a PS3 controller plugged into my laptop on e-UAE on linux. So far the only thing that I have working is a fire button. Ideally I would like to choose which button to use as fire and to use the left analog stick, but figured that if necessary I might have to use the d-pad. My question is, is there any documentation about the .uaerc configuration file, in particular related to joystick configuration? Thank you |
09 February 2010, 19:51 | #7 |
Registered User
Join Date: Oct 2007
Location: Toronto, Canada
Posts: 1,593
|
I'm a noob when it comes to E-UAE in general and I'm trying to get my Logitech Dual Action gamepad working under E-UAE for OS4.1..anyone have it working?
Will gaula88's info work for the Amiga version of E-UAE |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS-UAE and external usb soundcard on Linux | Speedvicio | support.FS-UAE | 4 | 01 May 2012 14:25 |
USB Joystic button problems | arnljot | support.WinUAE | 1 | 26 August 2007 13:11 |
What do you do when you configure a Logitech USB controller? | Cardynal | New to Emulation or Amiga scene | 0 | 15 November 2006 19:01 |
experimental uae for linux ( & mac too?? ) | mtb | support.OtherUAE | 57 | 15 September 2004 13:19 |
New user - OSX Panther & uae | rich3174 | New to Emulation or Amiga scene | 4 | 05 March 2004 17:26 |
|
|