ClassicWB doesn't boot It resets

[oddodo]

Hi i never had any problems with ClassicWB.My hdd broken so i installed again
Now it boots and after 2sec it resets. It's a loop.

060 blizzard installed the libs that i always use bb 1 and 2 os3.9

It's not the blizzard tried also a 030

[FOL]

Originally Posted by oddodo

Hi i never had any problems with ClassicWB.My hdd broken so i installed again
Now it boots and after 2sec it resets. It's a loop.

060 blizzard installed the libs that i always use bb 1 and 2 os3.9

It's not the blizzard tried also a 030

Try booting with no startup-sequence then type SET ECHO ON, press return, then type execute S:Startup-sequence. See if you can see where it resets.

You could also try renaming the AmigaOS ROM UPDATE to !AmigaOS ROM UPDATE and rename AmigaOS ROM UPDATE BB1 to AmigaOS ROM UPDATE.
See if that fixes it. Maybe it doesnt like the BB2 rom update.

Did it work before ROM updates were installed?

[oddodo]

Try booting with no startup-sequence then type SET ECHO ON, press return, then type execute S:Startup-sequence. See if you can see where it resets.

It resets again same loop. Also get this error (8000 000B 780095b0)
Amikit real works
ClassicWB 3.1 works

You could also try renaming the AmigaOS ROM UPDATE to !AmigaOS ROM UPDATE and rename AmigaOS ROM UPDATE BB1 to AmigaOS ROM UPDATE.

i don that but only found (AmigaOS ROM UPDATE BB2) i renamed that one

[FOL]

Originally Posted by oddodo

i don that but only found (AmigaOS ROM UPDATE BB2) i renamed that one

You should have 3 updates if you installed BB1 and BB2.
Renaming BB2 one, will enable the BB2 ROM Update.

Ok, what about no startup and try assign env: ram:, then loadwb.
Does it load workbench?

[oddodo]

Ok, what about no startup and try assign env: ram:, then loadwb.
Does it load workbench?

Get

Cannot open "workbench.library", version 45.
Unable to run "Amidok".

[FOL]

Originally Posted by oddodo

Get

Cannot open "workbench.library", version 45.
Unable to run "Amidok".

Doh forgot about that, I dont use ROM update. I have custom rom.
Try running setpatch, then loadwb.

[oddodo]

When i type Setpatch my a1200 freezes and then reset loop .Maybe thats the problem?

[FOL]

Originally Posted by oddodo

When i type Setpatch my a1200 freezes and then reset loop .Maybe thats the problem?

Yep, but is it that or the rom update.
Try renaming rom update to something else, then try it again.

[oddodo]

Have to stop for now

[oddodo]

Back again sorry about that.I installed everything again (Fresh install) .
WB 3.1 -> WB 3.9 -> ClassicWB voor 3.9 only with BB1.
Yesterday i typed setpach and got some lines but still after that a reboot so thats what's a little bit better than before .One thing that's also better it boots when i disable my 2nd partition and select dh0 to boot. I'm

using PFS3 as file system.
Maxtranster 0x1fe00
MAX 0x7FFFFFFE
but also for the amikit with no problems