13 August 2018, 19:05 | #161 |
Registered User
Join Date: Apr 2015
Location: Norway
Age: 47
Posts: 893
|
Also, both me and sean_skroht who both got our cases a short while ago also had issues with corrugations on the vent grills. While the original A1200 cases have perfectly straight grills. I find it hard to believe that just mine and his "slipped through" quality control. I suspect this could be on a huge batch of cases. Because mine and his looked identical (identical corrugations). Clearly these cases had not been inspected at all or was deemed "good enough".
As I said, I won't bother to take any action as it will take forever to get a new one, and I suspect a replacement case would have the same corrugations. But I think it's fair to let people know what they could expect from one of these. |
13 August 2018, 19:32 | #162 |
Registered User
Join Date: Aug 2017
Location: USA
Posts: 728
|
also dan woods video shows it perfectly
[ Show youtube player ] its from that popout |
13 August 2018, 19:39 | #163 |
Registered User
Join Date: May 2010
Location: Helsinki, Finland
Posts: 1,341
|
I don't believe that is the cause; injection molding is very sensitive to temperature and other factors, so more likely is that either the temperature hasn't been even in the mold (or injected material), or the part has been taken out of the mold while it was still soft which caused it to sag.
These kinds of molds are created with very accurate CNC tooling, there's no way that sort of inaccuracy would get in there. And at least the case I received doesn't exhibit that kind of waviness: |
13 August 2018, 19:49 | #164 | |
Registered User
Join Date: Apr 2015
Location: Norway
Age: 47
Posts: 893
|
Quote:
|
|
13 August 2018, 20:01 | #165 |
Registered User
Join Date: May 2010
Location: Helsinki, Finland
Posts: 1,341
|
Yes, it's quite possible that the people at the plant have adjusted the process so that cases produced later don't have that issue. There should have been test batches to get everything figured out before starting mass production, of course.
|
13 August 2018, 20:30 | #166 | ||
A1200.NET
Join Date: Jul 2015
Location: Here
Posts: 150
|
Quote:
You're absolutely right. Everything is done blindly. Jeez. Quote:
Gosh! When I see these type of speculations I'm just even more tired of doing this. Retool? Why retool? You have absolutely no idea what you're talking about sadly. There is no point for me trying to answer your questions since you don't have questions, just "certitudes". You know it all better than anyone on that very subject. So there is no point for me to say anything. EOL. |
||
13 August 2018, 20:39 | #167 | |
Registered User
Join Date: Apr 2015
Location: Norway
Age: 47
Posts: 893
|
Quote:
|
|
13 August 2018, 20:45 | #168 | |
Registered User
Join Date: Aug 2017
Location: USA
Posts: 728
|
Quote:
and sadly seems like you have no clue what quality control is i just call it like i see it many many companies jumping on the retro bandwagon trying to cash in producing low quality stuff its getting ridiculous anyways i was a potential customer till i seen that issue above in a review and now dont want to support any project you do so nvm Last edited by nexus; 13 August 2018 at 20:51. |
|
13 August 2018, 20:58 | #169 | ||
A1200.NET
Join Date: Jul 2015
Location: Here
Posts: 150
|
Quote:
Of course not! Like I said, everything is done blindly. - Of course cases are checked. But even when cases are checked a couple issues can always go through. That's not a big deal. Every cases that had issues were replaced. So far from the first run of cases for the KS campaign to the second run that happened recently, all in all exactly 19 units were replaced. From these 19 units: - 9 Metal series cases were replaced. - All others had issues like broken screw towers, a couple cases had hairline cracks, one even had issues about the top shell not closing correctly on top of bottom shell. And a couple other minor issues but we replaced the cases. - Of course this does not include mugs with broken handle that we DID also replace! Thanks Turrican9 Quote:
It's amazing how you have absolutely no idea what you're talking about. Enjoy buddy. EOL - And for good! |
||
13 August 2018, 21:03 | #170 | |
Registered User
Join Date: Apr 2015
Location: Norway
Age: 47
Posts: 893
|
Quote:
http://eab.abime.net/attachment.php?...3&d=1533694096 |
|
13 August 2018, 21:05 | #171 | |
Registered User
Join Date: Aug 2017
Location: USA
Posts: 728
|
Quote:
are you saying that im a liar and there is no issue with this case? cause thats what im TALKING about anyways seems like you are butthurt not my fault i didnt sell bad cases to people that were not cheap by any means but since you act like they all are not that way does this mean you are replacing the bad? guess everyone is playing lotto |
|
13 August 2018, 21:16 | #172 |
Registered User
Join Date: Apr 2015
Location: Norway
Age: 47
Posts: 893
|
Also, since I live in Norway it takes like forever to get the case in the first place. And shipping is not cheap. So sending it back is out of the question for me. it would take months. Already waited a month to get it in the first place, even though the shop listed it as in stock. I (the customer) will end up with the shortest straw. It's really annoying to get a case with this kind of quality because someone in the factory didn't bother to visually inspect it before they sent it out to resellers.
I wonder why I have never seen an original A1200 case with this kind of deformation/corrugations in the plastic? Because they did quality control. |
13 August 2018, 21:38 | #173 |
Registered User
Join Date: Jun 2015
Location: UK
Posts: 472
|
I've three of the new A1200 cases - One clear, one black, and one white, none of them show the issue described here, all mine were from the first Kickstarter batch for what it's worth.
|
13 August 2018, 21:43 | #174 |
Registered User
Join Date: Apr 2015
Location: Norway
Age: 47
Posts: 893
|
So maybe the first batch was good. Then they got sloppy. Who knows. Hard to say how many people got bad ones from the last batch.
|
13 August 2018, 23:57 | #175 |
Registered User
Join Date: Jul 2010
Location: Cumbria
Posts: 103
|
I like mine. There are imperfections, like the cutout thing, but it's a heck of a lot better than the yellowed one I had before with various bits manually drilled out of it over the years. And I recognise that a relatively small run of an extremely niche product, with all the planning and R&D that was involved, does have a price attached...
Please ignore the trolls/haters and keep on doing the best you can - looking forward to the keys and A500 case |
14 August 2018, 00:35 | #176 | |
Registered User
Join Date: Apr 2015
Location: Norway
Age: 47
Posts: 893
|
Quote:
However, I'm not sure we should accept lesser products just because it's a niche product. That could turn into a bad trend. Especially since it looks like the first kickstarter batch didn't have issues with corrugations in the vents. It has been known from day 1 that the cutout area for the HXC screen was visible from various angles so that was no suprise. If they start to do sloppy work and don't bother to inspect the cases before they are shipped to resellers then they should also lower the prices and notify people about inperfections. |
|
14 August 2018, 01:26 | #177 |
Banned
Join Date: Nov 2007
Location: Trondheim, Norway
Posts: 1,893
|
Why are you not attacking the reseller? It's their responsibility.
|
14 August 2018, 04:46 | #178 | |
Gimmemore Commodore
Join Date: Apr 2016
Location: Australia
Posts: 339
|
Quote:
Anyway AOTL got back to me and they are very kindly sending me out another one. They have been very supportive and I can't say a bad thing about them at all. @amenophis I understand that you're very proud of the product you have produced and I would be too if I was in your position. It also might be true that some people perhaps don't have a clear understanding of the manufacturing process, I know I don't. But belittling them is not the way to go. It's just bad customer service. I've been in the customer service industry for 30 years and if I talked to my customers like that, even when I know they are wrong, I would be out of a job. The best course of action here is to just simply acknowledge that there is an issue with a very small number of these cases and what will be done to rectify the issue. That's all people want to hear so that they can have the confidence that they are going to get a good product in the end, especially if they have initially had a less than pleasant experience. Anyway credits go out to you since AOTL are going to replace my case and you are going to send them a replacement. |
|
14 August 2018, 05:15 | #179 |
Registered User
Join Date: Sep 2004
Location: Tacoma, WA USA
Age: 52
Posts: 1,915
|
I recently got two from the last run from AOTL and they are fine.
|
14 August 2018, 06:08 | #180 | |
A1200.NET
Join Date: Jul 2015
Location: Here
Posts: 150
|
Quote:
I'm getting pretty tired of this guys.
Questions are: When anyone of you buy stuff from a shop or Amazon and there's an issue; - Do you claim all the production is flawed? - Do you say there's no QC at all? - Do you get on Jen-Hsun Huang if your Geforce card has an issue to tell him what he does is crap and there's no QC and he don't know shit what he's doing? Pretty sure its NO on all states. Why a couple guys here keep judging and pretend they know it all whatever I say after I actually answered their questions? Instead of contacting their reseller? Furthermore you guys could have sent us an email as well directly, instead of bad mouthing anything I answered to your questions. I answered your post Sean because you deserve an answer. And you did the right move by getting back to your reseller. But I will not comment this any further. |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New amiga 500 cases | Prosonic | News | 32 | 08 July 2018 15:04 |
IndieGoGo: New Compatible Amiga 500 Cases | amenophis | News | 50 | 08 June 2018 19:12 |
Re-producing Amiga cases? | Paul_s | Hardware mods | 38 | 01 April 2018 17:19 |
Acube systems announces the availability os Amiga OS 4.0 | Ultron | News | 16 | 27 April 2007 14:18 |
Amiga Cases, Check It Out | xamigax | Retrogaming General Discussion | 6 | 03 April 2002 06:54 |
|
|