AmigaOS 3.x and Google Drive handler - Page 2

Sir_Lucas · 31 January 2016, 00:20

Works quite all right with Roadshow.

BSzili · 31 January 2016, 08:24

Quote:

Originally Posted by TenLeftFingers

What browser can I use to authenticate the app? With iBrowse on OS3.0 the allow/deny buttons are greyed out - probably because the javascript is too intensive for it.

Sent from Ubuntu Touch using the Forum Browser app

ProTip: You need a modern browser, none of the Amiga browsers will cut it. Thank Google.

tolkien · 31 January 2016, 11:36

I have done It with chrome in my smartphone.

BSzili · 31 January 2016, 12:41

Quote:

Originally Posted by Nobby_UK

It works
Had to get a new Client Code.

But...
It will not even try to run with Easy-Net
Says there is no Stack is running

EasyNet uses the same bsdsocket.library interface the rest of the Amiga TCP/IP stacks do. In fact it's based on AmiTCP v4, so it should work. Your best bet is lending a copy to the developer, to figure out why it's not compatible.

Riempie · 31 January 2016, 20:49

Same here. Not working with Eaysnet. No tcp/ip stack error.

Sir_Lucas · 03 February 2016, 11:25

Native AROS version:
http://aminet.net/package/comm/tcp/G...ve_handlr_AROS

TenLeftFingers · 03 February 2016, 13:11

I'm wondering if there is an issue with google accounts using two-factor authentication? I've followed the instructions to the letter but every time get an error when I type "list google:" or "google:" which hangs the machine:

cDosHandlr::auth() curl_easy_perform() failed: Error

or

cDoshandler::auth() failed (first time login) { "error" : "invalid_grant" }

03 February 2016, 15:37

Quote:

Originally Posted by TenLeftFingers

cDoshandler::auth() failed (first time login) { "error" : "invalid_grant" }

this means setup error. do the followings:
- delete _access_token, _refresh_token, and _client_code from Your
Devs:Google/ folder.
- get a new client code, and save it to Devs:Google/_client_code
(so far all client code was 45 bytes length, i believe Your must be the same.)
- and activate the handler

if You still experiencing problems, feel free contact me: anchor@rocketmail.com

idrougge · 03 February 2016, 16:31

Isn't ENV: a better place for storing those tokens, or are they very large?

Lumby · 06 February 2016, 20:48

Hi

I get the same error and I have used 5 Google client code!
And there is no _access_token, _refresh_token in the Google folder.
I have tyed both version on my 68060/PPC board.

Quote:

Originally Posted by anchor

this means setup error. do the followings:
- delete _access_token, _refresh_token, and _client_code from Your
Devs:Google/ folder.
- get a new client code, and save it to Devs:Google/_client_code
(so far all client code was 45 bytes length, i believe Your must be the same.)
- and activate the handler

if You still experiencing problems, feel free contact me: anchor@rocketmail.com

Status Update.
Now It works great work ;-)
I use google-drive-handler_102e and speed is ok whit my 68060.

Sir_Lucas · 10 February 2016, 10:35

http://aminet.net/package/comm/tcp/G...ve_handler_OS4

AmigaOS4.x version available.

Starglider 2 · 15 February 2016, 01:25

Can anyone point to the best way to get my real A500+ online, that will work with this?

Samurai_Crow · 15 February 2016, 05:08

Have you tried a Plipbox in the parallel port?

BSzili · 15 February 2016, 09:41

Quote:

Originally Posted by Starglider 2

Can anyone point to the best way to get my real A500+ online, that will work with this?

There's no way, unless you have at least a 020 in it. Ciphers are slow, even low end 020 machines are really pushing it.

Sir_Lucas · 15 February 2016, 23:42

Quote:

Originally Posted by BSzili

There's no way, unless you have at least a 020 in it. Ciphers are slow, even low end 020 machines are really pushing it.

Yes, I agree. With A500+ one way of connecting is Plipbox and the other thing needed is to get Vampire 500 in the near future.

Starglider 2 · 16 February 2016, 01:15

Quote:

Originally Posted by Sir_Lucas

Yes, I agree. With A500+ one way of connecting is Plipbox and the other thing needed is to get Vampire 500 in the near future.

To clarify, Plipbox will work, or won't work (too slow)?

idrougge · 16 February 2016, 03:24

The handler is 2 MB in size. Do you have that much memory to begin with?

Starglider 2 · 16 February 2016, 04:12

Quote:

Originally Posted by idrougge

The handler is 2 MB in size. Do you have that much memory to begin with?

I have 8 MB fast mem, 1 MB chip I think. Does that work? A500+.

Sir_Lucas · 16 February 2016, 09:27

Quote:

Originally Posted by Starglider 2

To clarify, Plipbox will work, or won't work (too slow)?

Plipbox will work with A500 Plus. You also need a very lightweight TCP/IP stack. I suggest Roadshow.

Starglider 2 · 17 February 2016, 02:23

Quote:

Originally Posted by Sir_Lucas

Plipbox will work with A500 Plus. You also need a very lightweight TCP/IP stack. I suggest Roadshow.

That's very exciting. Edit: I'll start a new thread with my question about Google Mail not Google Drive... 😉

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to pass data to interrupt handler with VBCC?	strim	Coders. System	3	18 January 2016 14:38
AmigaOS 3.9 BB ROM Update Error & Ram-Handler Not Updating 44.24	crazyegg	support.Apps	23	10 November 2010 21:03
AmiCDrom v1.15 ( CDRom Handler Error HELP Plz )	iowtheme	support.Hardware	5	25 March 2010 11:03
Mount TCP: handler	amiga	support.Apps	2	20 March 2009 13:13
EXT2 file system handler: bugfix release 0.3 available	Paul	News	0	29 November 2004 15:38

31 January 2016, 00:20	#21
Sir_Lucas Registered User Join Date: Dec 2008 Location: Norwich, UK Posts: 668	Works quite all right with Roadshow.

31 January 2016, 11:36	#23
tolkien AmigaMan Join Date: Oct 2012 Location: Castro Urdiales/Spain Posts: 760	I have done It with chrome in my smartphone.

31 January 2016, 20:49	#25
Riempie Amiga freak Join Date: Jul 2001 Location: Netherlands Posts: 351	Same here. Not working with Eaysnet. No tcp/ip stack error.

03 February 2016, 11:25	#26
Sir_Lucas Registered User Join Date: Dec 2008 Location: Norwich, UK Posts: 668	Native AROS version: http://aminet.net/package/comm/tcp/G...ve_handlr_AROS

03 February 2016, 13:11	#27
TenLeftFingers Registered User Join Date: Sep 2013 Location: Ireland Posts: 800	I'm wondering if there is an issue with google accounts using two-factor authentication? I've followed the instructions to the letter but every time get an error when I type "list google:" or "google:" which hangs the machine: cDosHandlr::auth() curl_easy_perform() failed: Error or cDoshandler::auth() failed (first time login) { "error" : "invalid_grant" }

03 February 2016, 16:31	#29
idrougge Registered User Join Date: Sep 2007 Location: Stockholm Posts: 4,332	Isn't ENV: a better place for storing those tokens, or are they very large?

10 February 2016, 10:35	#31
Sir_Lucas Registered User Join Date: Dec 2008 Location: Norwich, UK Posts: 668	http://aminet.net/package/comm/tcp/G...ve_handler_OS4 AmigaOS4.x version available.

15 February 2016, 01:25	#32
Starglider 2 Registered User Join Date: Jan 2014 Location: California Posts: 1,146	Can anyone point to the best way to get my real A500+ online, that will work with this?

15 February 2016, 05:08	#33
Samurai_Crow Total Chaos forever! Join Date: Aug 2007 Location: Waterville, MN, USA Age: 49 Posts: 2,186	Have you tried a Plipbox in the parallel port?

16 February 2016, 03:24	#37
idrougge Registered User Join Date: Sep 2007 Location: Stockholm Posts: 4,332	The handler is 2 MB in size. Do you have that much memory to begin with?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)